DREAMS Drift Bedside Cabinet User manual

One person
assembly
1 hour approx
assembly time
Drift Bedside Cabinet
MK1 220425

Thank you
Hello, thanks for choosing to purchase your furniture from Dreams - you're now on your way to
creating a functional and fabulous room. Before you begin building your furniture, please take a
moment to read through the instructions and make sure that you've got all the relevant parts
listed on the following pages.
Parts
Important information
Once you have identified you have all of the relevant
parts and fittings, please follow the instructions below;
Parts list
A
USB power plug
a x1
Fittings
Please check you have all the parts
listed below with your product:
Hardware included for
chest assembly
A. Bedside Cabinet
Drift bedside - Assembly guide - Page 2
Tools required
No extra tools needed
Assembly tips
Before you begin, it’s best to identify all parts and fittings to build your
furniture. We advise laying these out on the floor to check you have
everything, and familiarising yourself before building.
Top tip
We recommend that you build your new furniture in the room you’d like it to be
located in - this will help prevent any risk of damage whilst moving it.
Safety and care
It’s really important to ensure children and animals are kept away from the
assembly area, as there are small components used which could present a
choking hazard. All plastic and wrapping materials should also be
To keep your little ones busy, there is a colouring page inside the back cover.
Help and support
At Dreams, it’s our mission to give the whole nation a great night’s sleep - this
means that the quality of our products is of utmost importance to us. If there
are any issues with your product or any missing parts, please contact our Help
Centre on 0800 652 6750, where a member of our team will be happy to help.
(For customers based in Northern Ireland, please call 028 9050 8300)
Recycling
Please ensure that packaging is disposed of in a safe and environmentally
friendly way, and recycle where possible. Our assembly instructions are
printed on recycled paper. Please keep your assembly instructions safe to refer
back to in the future.

a
Drift bedside - Assembly guide - Page 3
1ii)
i)
a
A
Carefully remove
the glass and put
safely on one side.
Push in the centre of the
drawer and it will spring open.
Remove the fittings box.
iii) Tilt the cabinet and
unclip the cable from the
velcro tab underneath
the base.
iv) v) Connect the power,
this should be an
earthed power supply.
Replace the glass.
Your bedside cabinet is now completely finished, please lift into place, do not drag it across the floor.
If you use a gaming
controller, you can
stand it here whilst it is
recharging through the
high power USB.
Space for a games console.
If required, can pass a
power plug through one
of the ventilation holes.
Remove plastic caps to
increase the ventilation
Back
View
Inner
View

Drift bedside - Care and maintenance - Page 4
Care and maintenance
Here are some tips to keep your new furniture in tip-top condition
Fabric
Please note depending on the lighting, positioning and surroundings of your
period of time, the colour might lighten or fade slightly due to light exposure.
Wood
Please note each of our wooden pieces are unique, meaning that markings and
shade can vary slightly between beds. Over a period of time, the wood might
lighten or fade slightly due to light exposure.
Metal
Metal tends to be more resilient to everyday wear and tear. We recommend to
gently dust your metal furniture and keep it dry to maintain its look.
Periodically we recommend you check that the screws or fixtures haven't been
become loose, over time. To move your new furniture, we recommend lifting it where
possible, as dragging or pushing it could cause damage to the legs or flooring.
Checking and moving
Thank you for shopping with us - we hope you have
a great night's sleep
Cleaning
To clean your new furniture, we'd advise using a warm damp cloth or if fabric,
remove dust using a low suction vacuum cleaner - please do not use abrasive
chemicals or bleach as this may damage the product.
500
420
535
25
Overall Dimensions (WDH mm)
500 x 420 x 535
Glass Dimensions (WDH mm)
395 x 313 x 5

Little dreamers
Keep the little ones entertained while
you assemble your new purchase.