dreo DR-HSH005 User manual

[email protected]
MANUFACTURER：
Shenzhen Hesung Innovation Technology Co., LTD
ADDRESS：
Yousuowei Building, Jiaxian Road, Shenzhen, China
Oil-Filled Heater
User Guide
MODEL: DR-HSH005
[email protected]

for Choosing Dreo
Your support means the world to us
Thank You
!
We hope you enjoy our oil filled heater as much as we did creating
.
.
Scan or visit dreo.com/warranty
to extend your warranty by registering your product. If you need
any help, don't hesitate to email us to get expert support!
Email: [email protected]
-

1
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS -------------------------01
USING YOUR HEATER--------------------------------------------------06
Package Contents------------------------------------------------------07
Product Diagram --------------------------------------------------------07
Caster Setup -------------------------------------------------------------08
LED Display ---------------------------------------------------------------10
Control Panel ------------------------------------------------------------10
Remote Control----------------------------------------------------------11
Operations and Functions ------------------------------------------12
Other Features ----------------------------------------------------------14
Replacement of Batteries in Remote Control -----------------15
Specifications ------------------------------------------------------------16
CLEANING AND MAINTENANCE -----------------------------------17
TROUBLESHOOTING----------------------------------------------------19
WARRANTY AND SERVICE-------------------------------------------22
IMPORTANT
SAFETY
INSTRUCTIONS
01
Oil-Filled Heater

23
IMPORTANT SAFETY
INSTRUCTIONS
READ AND FOLLOW ALL SAFETY
INFORMATION AND INSTRUCTIONS.
KEEP FOR FUTURE REFERENCE.
FOR HOUSEHOLD USE ONLY
Thank you for choosing DREO Oil Filled Heater. Please read
this User Guide thoroughly before use and keep it for future
reference.
Extreme caution is necessary when any heater is used
by or near children or invalids and whenever the heater
is left operating and unattended.
Always unplug heater when not in use.
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the
following:
Read all instructions before using this heater.
This heater is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces. If provided, use the handle
when moving this heater.
Keep combustible materials, such as furniture, pillows,
bedding, papers, clothes, and curtains at least 3 feet (0.9
m) from the front of the heater and keep them away from
the sides and rear.
Do not operate any heater with a damaged cord or plug
or after the heater malfunctions, has been dropped or
damaged in any manner. Discard heater, or return to
authorized service facility for examination and/or repair.
Do not use outdoors.
This heater is not intended for use in bathrooms,
laundry areas and similar indoor locations. Never locate
heater where it may fall into a bathtub or other water
container.
Do not run cord under carpeting. Do not cover cord with
throw rugs, runners, or similar coverings. Do not route
cord under furniture or appliances. Arrange cord away
from traffic area and where it will not be tripped over.
To disconnect heater, turn controls to off, then remove
plug from outlet.
Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause an
electric shock or fire, or damage the heater.
To prevent a possible fire, do not block air intakes or
exhaust in any manner. Do not use on soft surfaces,
like a bed, where openings may become blocked.
A heater has hot and arcing or sparking parts inside. Do
not use it in areas where gasoline, paint, or flammable
liquids are used or stored.
Use this heater only as described in this manual. Any
other use not recommended by the manufacturer may
cause fire, electric shock, or injury to persons.
Always plug heaters directly into a wall outlet/receptacle.
Never use with an extension cord or relocatable power
tap (outlet/power strip).

45
If there is a loose fit between the plug and the socket
or the plug becomes very hot, the socket may need
to be replaced. Check with a qualified electrician to
replace the socket.
A loose fitting outlet can cause the plug to overheat or
cause a fire. Be sure plug fits tight in the outlet.
It is normal for the plug and cord to feel warm to the
touch. A plug or cord which becomes hot to the touch
or becomes distorted in shape may be a result of a
worn electrical outlet. Worn outlets or receptacles
should be replaced prior to further use of the heater.
Plugging the heater into a worn outlet / receptacle may
result in overheating of the power cord or fire.
The output of this heater may vary and its temperature
may become hot enough to burn exposed skin. Use of
this heater is not recommended for persons with a high
sensitivity to heat or an inability to react to avoid burns.
should be replaced prior to further use of the heater.
Plugging the heater into a worn outlet / receptacle may
result in overheating of the power cord or fire.
Ensure the heater is on a stable, secure surface to
eliminate the potential of tipping it over.
Make sure that no pieces of polystyrene or other
packaging material have been left between elements
of the appliance. It may be necessary to pass over the
appliance with a vacuum cleaner.
Do not attempt to modify or repair the product by
yourself. Doing so could void the warranty and cause
damage or personal injury. Only a repair technician may
disassemble or repair this product.
Choking hazard – This remote control unit contains
a small battery. Keep the remote control away from
children and do not swallow the battery. If the battery
is swallowed seek medical advice at once.
DANGER - High temperatures may be generated
under certain abnormal conditions. Do not
partially or fully cover or obstruct the front of
this heater.
READ AND SAVE
THESE
INSTRUCTIONS
NOTE: There may be a trace of smoke or odor when the
unit is first operated. This indicates that a drop of oil fell
on the heating coil during the manufacturing process. It
will quickly evaporate and should not re-occur.
IMPORTANT - This appliance has a polarized plug (one
blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to rig this safety
feature.
If the machine is not working as it should, has received a
sharp blow, has been dropped, damaged, left outdoors,
or dropped into water, do not use and contact Customer
Support.

67
Package Contents
Product Diagram
1 x Oil-Filled Heater
1 x Remote Control
4 x Casters
1 x Thank You Card
1 x User Guide
USING YOUR
HEATER
02
Oil-Filled Heater
LED Display
Control Panel
Power Cord
and Plug
Fins
Handle
Caster
Assemblies

89
Caster Setup Instructions
The heater is packaged with the casters unattached. You
must attach them before operating the heater to prevent the
heater from tipping over.
The casters are inside the foam at the bottom of the package.
Place the heater
upside down and
extend the caster
supports outwards.
Align four casters
with the mounting
holes and press
them into the holes.
Set the heater upright and
plug in.
Tip-over hazard.
Do not operate without the casters attached.
Fire hazard. Operate the heater in the upright position
only. Any other position can cause damage to this heater
and even a fire hazard.
1
2
3

10 11
LED Display
Control Panel
Decrease
Temperature/
Time
Increase
Temperature/
Time
Temperature/Time Fahrenheit
Hour
Power Status
Child Lock
Timer
Timer
Heating Status
Heat Mode
Heat Mode
Power On/Off
F
Remote Control
Power On/Off
Mute
Temp/Time +
ECO Mode
Temp/Time -
Mode
Timer

12 13
When the unit is on, hold and at the
same time for 2 seconds to enable/disable Child
Lock.
Press on the remote control to turn the buzzer
on/off.
Operations and Functions
Place the heater on a firm, level surface free from obstructions,
and at least 3ft. (0.9m) away from any wall or combustible
materials.
Plug into an appropriate voltage AC 120V outlet, The unit will
enter standby mode with a beep and power indicator on red.
Your heater is ready for use now.
When the unit is plugged in, press on the heater
/ remote control to turn the heater on with default
settings: 95°F and high mode ( ) on the
LED display.
When the unit is on, repeatedly press on the
heater to cycle through High -> Medium -> Low -> ECO
modes, OR simply press or on the remote
control for mode switch.
When ECO mode is on, the heater will adjust the
working mode automatically based on the ambient
temperature.
Press once again to turn the heater off.
Power ON/OFF
Mode / Heat Level Settings
Mute/Unmute
ECO Mode
When the unit is on, press 图图or 图图on the
heater / remote control to adjust the set
temperature from 40 to 95°F in 1°F increments.
When the unit is running, press on the heater /
remote control to enter timer setting.
Press or to select a time (00h-24h) and
press again to start the timer.
When the timer ends, the heater will
automatically shut off and go into standby.
Note:
Note:
Note:
1.
1.
2.
2.
If you set the timer when the unit is on standby, the
heater will automatically start running when the
timer ends.
after the unit is turned off, the heater will continue
radiating heat for a while because of the unique
properties of diathermic oil.
All the buttons will be locked when Child Lock is enabled.
Press the power button to end the timer immediately.
Child Lock is not applicable to the remote control.
When the ambient temperature reaches the
set temperature, the heating element will stop
running and the indicator 图 will go off.
When the ambient temperature is lower than
the set temperature, the heater will start
running again.
Temperature Adjustment
Timer
Child Lock

14 15
Memory
Function
If you turn off the heater and keep it
connected to the power source, the heater
will return to its last status (working mode &
temperature) once turned on again.
Note: not applicable to timer, mute, eco mode
and child lock settings.
Overheat
Protection
When the ambient temperature is above
122°F, the heater will stop heating, with 10
beeps and the error code “FF” flashing on the
display.
Please unplug it from the power source
and power it on again when the ambient
temperature drops below 122°F.
Tip-over
Protection
When the heater is tipped over, the
heater will shut off automatically.
Please place the heater back on a flat,
level and stable surface. Turn it on
again.
Display
Auto-
Dimming
The display will go dim automatically
after 60 seconds if no action is taken by
the user.
Other Features Replacement of Batteries in
Remote Control
CAUTION:
Remove the battery cover in the direction indicated by
the arrow.
Replace with two new AAA 1.5 batteries. Make sure that
the positive(+) and negative(-) terminals are positioned
correctly.
Push the battery cover back into place.
Replace with new batteries of the same type when
replacement is required.
Remove the batteries when the remote control is
unused for long period of time.
Do not attempt to dismantle the batteries.
Do not dispose the batteries in fire, batteries may
explode or leak.
1.
2.
3.

16 17
Specifications
Model DR-HSH005
Input 120V~ 60Hz
Rated Power
1500W (High)
900W (Medium)
600W (Low)
Remote Control
Battery AAA 1.5V
CLEANING AND
MAINTENANCE
03
Oil-Filled Heater

18 19
Cleaning and Maintenance
It is recommended that the heater be cleaned at least one
time during the operating season and before off-season
storage in order to provide the optimum level of performance.
Turn the heater “OFF”, unplug it and wait for the heater to
cool down.
Use only a soft cloth to gently wipe the outer surfaces of
the heater clean.
Do not use any cleaning agents or detergents.
Never immerse the heater in water and never allow water to
drip into the motor housing. Be sure not to wet the heating
element and the switches.
For storage, you may leave the heater covered to protect
it from dust. Store it in a cool, dry location and arrange the
cable away from traffic areas so that it will not be tripped
over or damaged.
Always disconnect the appliance from the mains
by switching it off and removing the plug from the
power outlet before cleaning.
Do not allow water to run into the interior of the heater as
this could result in a fire or electric shock hazard.
Any other servicing should be performed by an authorized
service representative.
Caution:
TROUBLESHOOTING
04
Oil-Filled Heater

20 21
Troubleshooting
The following troubleshooting guide addresses the most
common problems. If your problem is not listed or still
persists, please contact our Customer
Support at [email protected].
Problem Possible Causes Solution
Malfunction
Codes on LED
Display
E2 - Temperature
sensor short circuit
Unplug it from the
power source and
contact Customer
Support.
E1 - Temperature
sensor open circuit
Unplug it from the
power source and
contact Customer
Support.
FF - Overheat
Protection (Ambient
temperature above
122°F)
Unplug it from the
power source and
power it on again
when the ambient
temperature drops
below 122°F.
Heater does
not start
Power cord is not
properly plugged in.
Connect the plug to
a powered electrical
outlet.
Heater does
not start
Overheat Protection
has been activated.
Turn the heater OFF,
unplug it and allow it
to cool.
Check and remove
any objects on or
adjacent to the
heater.
Wait 5-10 minutes
before plugging the
unit back in.
No power is passing
through the unit.
Ensure that your
circuit breaker or fuse
is working properly.
Ensure your heater is
placed on a flat and
even surface.
The set temperature
is lower than the
ambient temperature.
Make sure the
thermostat is set at
a higher temperature
than the ambient
temperature.
The heater
suddenly stops
during heating
The temperature
exceeds the threshold
of the thermal cutoff.
Turn off the unit and
unplug it from the
power outlet. Allow it
to cool, and then plug
it into the electrical
outlet again.
The heater is tipped
over.
Place it on a flat, level
and stable surface.

22 23
WARRANTY AND
SERVICE
05
Oil-Filled Heater
Warranty and Service
This product is covered with DREO product and labor warranty
for 12 months from the date of its original purchase.
Extend your warranty by registering your new product on our
website https://dreo.com/warranty.
Default 12-Month Warranty
Extend Your Warranty
The warranty will not apply in cases of:
We can only provide after-sales service for products that are
sold by DREO or DREO authorized retailers and distributors. If
you have purchased your unit from a different place, please
contact your seller for return and warranty issues.
Accident, misuse, or repairs performed by unauthorized
personnel.
Any unit that has been tampered with or used for commercial
purposes.
Normal wear and tear of wearable parts.
Use of force, damage caused by external influences.
Damage caused by non-observance of the User Guide, e.g.
connection to an unsuitable mains supply or non-compliance
with the instructions.
Partially or completely dismantled appliances.
Defects caused by or resulting from damages from shipping
or from repairs, service, or alteration to the product or any
of its parts that have been performed by a repair person
not authorized by DREO.

24
If you encounter any issues or have any questions regarding
your new product, please contact our helpful Customer
Support Team.
Your satisfaction is our goal!
* Please have your order confirmation number ready before
contacting Customer Support.
We’re Here to Help!
Email: [email protected]
Customer Support
MADE IN CHINA E190384