dreo DR-HSH010 User manual

Oil Filled Heater
USER MANUAL
Looking for help?
Contact us to get expert support.
DR-HSH010
www.dreo.com
[email protected] www.dreo.com
This product is only suitable for well insulated spaces or occasional use.

Your support means the world to us. We
hope you enjoy our product as much as
we did creating it.
,,
Thanks for
Choosing
DREO!
Scan or visit dreo.com/warranty
To extend your warranty for free by registering your product.
If you have any product issues, we always stand ready to help.
Extend
Your Warranty
for Free
[e-mail]
www.dreo.com

Your support means the world to us. We
hope you enjoy our product as much as
we did creating it.
,,
Thanks for
Choosing
DREO!
Scan or visit dreo.com/warranty
To extend your warranty for free by registering your product.
If you have any product issues, we always stand ready to help.
Extend
Your Warranty
for Free
[email protected]
www.dreo.com

CONTENTS
4
2
6
1
5
3
8-11
5-61-4
12 13-14
7
CLEANING AND
MAINTENANCE
KNOWING
ASSEMBLING
YOUR
HEATER
YOUR
HEATER
IMPORTANT
SAFETY
INSTRUCTIONS
TROUBLE-
SHOOTING
USING YOUR
HEATER
7
15-16
DREO CUSTOMER
CARE

CONTENTS
4
2
6
1
5
3
8-11
5-61-4
12 13-14
7
CLEANING AND
MAINTENANCE
KNOWING
ASSEMBLING
YOUR
HEATER
YOUR
HEATER
IMPORTANT
SAFETY
INSTRUCTIONS
TROUBLE-
SHOOTING
USING YOUR
HEATER
7
15-16
DREO CUSTOMER
CARE

2
Dreo Oil Filled Heater
1Dreo Oil Filled Heater
IMPORTANT SAFETY
INSTRUCTIONS
Do not cover
the heater while
in operation.
GENERAL CARE AND SAFETY GUIDE
When using electrical
appliances, basic
precautions should
always be followed to
reduce the risk of fire,
electric shock, and
injury to persons and
hyperthermia, includ-
ing the following:
The product is for household use only.
Read all instructions before using this appliance and keep them for future reference.
Use only the voltage specified on the rating plate of the heater.
Do not cover or restrict airflow to the inlet or exhaust grilles in any manner as the
appliance may overheat and become a fire risk.
Do not place appliance close to a radiant heat source.
Do not operate in areas where gasoline, paint or other flammable liquids are used or
stored.
Do not use the appliance to dry clothes.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as
this may cause an electric shock, fire or damage to the appliance.
Do not operate any appliance with a damaged cord, plug or after the appliance
malfunctions or has been dropped or damaged in any manner. Return to a qualified
electrical person for examination, electrical or mechanical adjustment, service or
repair.
This appliance is intended for household use only and not for commercial or industrial
use.
Use this appliance only as described in this manual. Any other use is not recommended
by the manufacturer and may cause fire, electric shock or injury.
The most common cause of overheating is deposits of dust or flu in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and vacuum
cleaning air vents and grilles.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not
wet) rinsed in hot soapy water only. Always remove plug from the mains supply before
cleaning.
Do not connect the appliance to the mains voltage until completely assembled and
adjusted.
This appliance heats up slightly when in use. To avoid burns, do not let bare skin touch
hot surfaces.
Switch o and use handles where provided when moving.
Use this heater on a horizontal and stable surface as applicable.
Do not operate with cord set coiled up as a build up of heat is likely, which could be
suicient to become a hazard.
The use of an extension cord with this appliance is not recommended.
Do not remove plug from power socket until the appliance has been switched o.
Do not remove plug from power socket by pulling flex - always grip plug.
Always unplug appliance when not in use.
Do not allow cord to come in contact with heated surfaces during operation.
Do not run cord under carpeting, throw rugs or runners etc. Arrange cord away from
traic areas so that it will not be tripped over.
Do not twist, kink or wrap the cord around the appliance, as this may cause the
insulation to weaken and split. Always ensure that all cord has been removed from any
cord storage area.
Do not store appliance while it is still hot.
The heater must not be located immediately below a socket-outlet.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming
pool.
This heater is filled with a precise quantity of special oil. Repairs requiring opening of
the oil container are only to be made by the manufacture or his service agent who
should be contacted if there is an oil leakage.
If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a Similarly qualified l person in order to avoid a hazard.
Do not use this appliance outdoors, or on wet surfaces. Avoid spilling liquid on the
appliance.
When scrapping the heater, follow the regulations concerning the disposal of oil.
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children without
supervision
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/o the appliance
provided that it has been placed or installed in its intended normal operating position
and they have been given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children aged from 3 years and less
than 8 years shall not plug in, regulate and clean the appliance or perform user
maintenance.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
Do not
use the
Oil-filled heater
near flammables
and combustibles.
1
12.
11.

2
Dreo Oil Filled Heater
1Dreo Oil Filled Heater
IMPORTANT SAFETY
INSTRUCTIONS
Do not cover
the heater while
in operation.
GENERAL CARE AND SAFETY GUIDE
When using electrical
appliances, basic
precautions should
always be followed to
reduce the risk of fire,
electric shock, and
injury to persons and
hyperthermia, includ-
ing the following:
The product is for household use only.
Read all instructions before using this appliance and keep them for future reference.
Use only the voltage specified on the rating plate of the heater.
Do not cover or restrict airflow to the inlet or exhaust grilles in any manner as the
appliance may overheat and become a fire risk.
Do not place appliance close to a radiant heat source.
Do not operate in areas where gasoline, paint or other flammable liquids are used or
stored.
Do not use the appliance to dry clothes.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as
this may cause an electric shock, fire or damage to the appliance.
Do not operate any appliance with a damaged cord, plug or after the appliance
malfunctions or has been dropped or damaged in any manner. Return to a qualified
electrical person for examination, electrical or mechanical adjustment, service or
repair.
This appliance is intended for household use only and not for commercial or industrial
use.
Use this appliance only as described in this manual. Any other use is not recommended
by the manufacturer and may cause fire, electric shock or injury.
The most common cause of overheating is deposits of dust or flu in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and vacuum
cleaning air vents and grilles.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not
wet) rinsed in hot soapy water only. Always remove plug from the mains supply before
cleaning.
Do not connect the appliance to the mains voltage until completely assembled and
adjusted.
This appliance heats up slightly when in use. To avoid burns, do not let bare skin touch
hot surfaces.
Switch o and use handles where provided when moving.
Use this heater on a horizontal and stable surface as applicable.
Do not operate with cord set coiled up as a build up of heat is likely, which could be
suicient to become a hazard.
The use of an extension cord with this appliance is not recommended.
Do not remove plug from power socket until the appliance has been switched o.
Do not remove plug from power socket by pulling flex - always grip plug.
Always unplug appliance when not in use.
Do not allow cord to come in contact with heated surfaces during operation.
Do not run cord under carpeting, throw rugs or runners etc. Arrange cord away from
traic areas so that it will not be tripped over.
Do not twist, kink or wrap the cord around the appliance, as this may cause the
insulation to weaken and split. Always ensure that all cord has been removed from any
cord storage area.
Do not store appliance while it is still hot.
The heater must not be located immediately below a socket-outlet.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming
pool.
This heater is filled with a precise quantity of special oil. Repairs requiring opening of
the oil container are only to be made by the manufacture or his service agent who
should be contacted if there is an oil leakage.
If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a Similarly qualified l person in order to avoid a hazard.
Do not use this appliance outdoors, or on wet surfaces. Avoid spilling liquid on the
appliance.
When scrapping the heater, follow the regulations concerning the disposal of oil.
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children without
supervision
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/o the appliance
provided that it has been placed or installed in its intended normal operating position
and they have been given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children aged from 3 years and less
than 8 years shall not plug in, regulate and clean the appliance or perform user
maintenance.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
Do not
use the
Oil-filled heater
near flammables
and combustibles.
1
12.
11.

4
Dreo Oil Filled Heater
3Dreo Oil Filled Heater
FOR HOUSEHOLD USE ONLY
READ AND SAVE
THESE INSTRUCTIONS
Specifications
Check the appliance regularly and
refer to TROUBLESHOOTING or
contact our customer support if
it shows any of the following
signs:
- Power cord or plug is damaged.
- Loud noise, unusual smell or excessive heat.
Gentle Reminder:
Model DR-HSH010
Rated Power 2000W
Input AC 220-240 50Hz
Remote Control
Baery CR2025, 3V
HOT SURFACE
THE HEATER CAN BE VERY HOT ON THE SIDES AND REAR.
ONLY THE FRONT PANEL AND HANDLE ARE SAFE TO
TOUCH DURING USE.
CAUTION —Some parts of this product can become very hot and cause burns. Particular
aention has to be given where children and vulnerable people are present.
WARNING: In order to avoid overheating, do not cover the heater.
WARNING: This heater is not equipped with a device to control the room temperature.
Do not use this heater if it has been dropped.
Do not use if there are visible signs of damage to the heater.
CAUTION: In order to avoid a hazard due to inadvertent reseing of the thermal
cut-out,this appliance must not be supplied through an external switching device,
such as a timer, or connected to a circuit that is regularly switched on and o by the
utility.
WARNING:
Do not use this heater in small rooms when they are occupied by
persons not capable of leaving the room on their own, unless
constant supervision is provided.
If the supply cord is damaged, it must be replaced by the manufac-
turer, its service agent or similarly qualified persons in order to
avoid a hazard.
Do not cover.
DANGER - High temperatures may be generated under
certain abnormal conditions. Do not partially or fully
cover or obstruct the front of this heater.
The appliance is not to be used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervi-
sion or instruction.
Children being supervised not to play with the appliance.
CAUTION — Some parts of this product can become very hot and
cause burns. Particular aention has to be given where children
and vulnerable people are present.
36.
37.
38.
39.
40.
41.

4
Dreo Oil Filled Heater
3Dreo Oil Filled Heater
FOR HOUSEHOLD USE ONLY
READ AND SAVE
THESE INSTRUCTIONS
Specifications
Check the appliance regularly and
refer to TROUBLESHOOTING or
contact our customer support if
it shows any of the following
signs:
- Power cord or plug is damaged.
- Loud noise, unusual smell or excessive heat.
Gentle Reminder:
Model DR-HSH010
Rated Power 2000W
Input AC 220-240 50Hz
Remote Control
Baery CR2025, 3V
HOT SURFACE
THE HEATER CAN BE VERY HOT ON THE SIDES AND REAR.
ONLY THE FRONT PANEL AND HANDLE ARE SAFE TO
TOUCH DURING USE.
CAUTION —Some parts of this product can become very hot and cause burns. Particular
aention has to be given where children and vulnerable people are present.
WARNING: In order to avoid overheating, do not cover the heater.
WARNING: This heater is not equipped with a device to control the room temperature.
Do not use this heater if it has been dropped.
Do not use if there are visible signs of damage to the heater.
CAUTION: In order to avoid a hazard due to inadvertent reseing of the thermal
cut-out,this appliance must not be supplied through an external switching device,
such as a timer, or connected to a circuit that is regularly switched on and o by the
utility.
WARNING:
Do not use this heater in small rooms when they are occupied by
persons not capable of leaving the room on their own, unless
constant supervision is provided.
If the supply cord is damaged, it must be replaced by the manufac-
turer, its service agent or similarly qualified persons in order to
avoid a hazard.
Do not cover.
DANGER - High temperatures may be generated under
certain abnormal conditions. Do not partially or fully
cover or obstruct the front of this heater.
The appliance is not to be used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervi-
sion or instruction.
Children being supervised not to play with the appliance.
CAUTION — Some parts of this product can become very hot and
cause burns. Particular aention has to be given where children
and vulnerable people are present.
36.
37.
38.
39.
40.
41.

Package Contents
56
Assembly Instructions
Fins
LED Display
Control Panel
Handle
User
Manual
Dreo Oil Filled Heater Dreo Oil Filled Heater
2
ASSEMBLING YOUR
HEATER
Tip-over hazard.
Do not operate without the casters properly installed.
When using the appliance for the first time, remove the wraps and aach the
parts by following the steps below.
Fire hazard.
Operate the heater in the upright position only. Any other position
can cause damage to this heater and even a fire hazard.
Burn hazard.
Unplug and allow the heater to cool before using the handle to
move the heater.
2. Screw through the
holes in the casters,
make sure the base
and the casters are
firmly fixed.
3. Set the heater
upright. Use the front
handle to move to
the desired location.
WARNING
1. Place the heater
upside down and align
the casters with the
holes on the base.
4 x Caster Screws 2 x Caster Wheels
Quick
Start
Guide
Handle
Power & Plug

Package Contents
56
Assembly Instructions
Fins
LED Display
Control Panel
Handle
User
Manual
Dreo Oil Filled Heater Dreo Oil Filled Heater
2
ASSEMBLING YOUR
HEATER
Tip-over hazard.
Do not operate without the casters properly installed.
When using the appliance for the first time, remove the wraps and aach the
parts by following the steps below.
Fire hazard.
Operate the heater in the upright position only. Any other position
can cause damage to this heater and even a fire hazard.
Burn hazard.
Unplug and allow the heater to cool before using the handle to
move the heater.
2. Screw through the
holes in the casters,
make sure the base
and the casters are
firmly fixed.
3. Set the heater
upright. Use the front
handle to move to
the desired location.
WARNING
1. Place the heater
upside down and align
the casters with the
holes on the base.
4 x Caster Screws 2 x Caster Wheels
Quick
Start
Guide
Handle
Power & Plug

KNOWING YOUR
HEATER
Geing the Most Out of Your Heater
78
USING YOUR HEATER
Dreo Oil Filled Heater Dreo Oil Filled Heater
4
2. Keep curtains and other furniture
at least 3 ft/ 1m away from the heater.
1. Put the heater by the window to
block the penetration of cold air from
outside.
＞3ft
＞3ft
What to Do
Put it by the window to get even
warm air.
What Not to Do
If you put it near the door, cold air
invades and warm air escapes easily.
Even
warm air
Cold
air Cold
air
Control Panel
Power On/O
Touch to turn the heater on or o.
Long press for 10s to restore factory seings.
Note:
When the heater is plugged into the electric outlet, the power
indicator will light in red.
Mode Seings
Touch to cycle through and Power Heat modes.
Three heating levels:
H1(800W), H2(1200W), H3(2000W).
The display will show H1, H2 or H3 accordingly:
H1 - Low heat mode
H2 - Medium heat mode
H3 - High heat mode
Warm air
Before First Use
The first time the appliance is used, run it at the maximum power for at least two hours. During
this time, ventilate the room thoroughly to eliminate the “new” smell release by the appliance.
It is completely normal for the appliance to emit “creaking” sounds the first time it is run.
Power
Heat
3
The heater will automatically select its optimal heating
power, depending on the dierence between the set
temperature (5-35℃) and ambient temperature.
Note:
When the ambient temperature drops below the set
temperature, the heater will adjust the power depending
on the dierence between the two temperatures after 40
minutes.
In ECO mode, the heater will turn o automatically when
the set temperature has been reached.
If your heater turns o frequently, please raise the set
temperature or switch to Power Heat mode.

KNOWING YOUR
HEATER
Geing the Most Out of Your Heater
78
USING YOUR HEATER
Dreo Oil Filled Heater Dreo Oil Filled Heater
4
2. Keep curtains and other furniture
at least 3 ft/ 1m away from the heater.
1. Put the heater by the window to
block the penetration of cold air from
outside.
＞3ft
＞3ft
What to Do
Put it by the window to get even
warm air.
What Not to Do
If you put it near the door, cold air
invades and warm air escapes easily.
Even
warm air
Cold
air Cold
air
Control Panel
Power On/O
Touch to turn the heater on or o.
Long press for 10s to restore factory seings.
Note:
When the heater is plugged into the electric outlet, the power
indicator will light in red.
Mode Seings
Touch to cycle through and Power Heat modes.
Three heating levels:
H1(800W), H2(1200W), H3(2000W).
The display will show H1, H2 or H3 accordingly:
H1 - Low heat mode
H2 - Medium heat mode
H3 - High heat mode
Warm air
Before First Use
The first time the appliance is used, run it at the maximum power for at least two hours. During
this time, ventilate the room thoroughly to eliminate the “new” smell release by the appliance.
It is completely normal for the appliance to emit “creaking” sounds the first time it is run.
Power
Heat
3
The heater will automatically select its optimal heating
power, depending on the dierence between the set
temperature (5-35℃) and ambient temperature.
Note:
When the ambient temperature drops below the set
temperature, the heater will adjust the power depending
on the dierence between the two temperatures after 40
minutes.
In ECO mode, the heater will turn o automatically when
the set temperature has been reached.
If your heater turns o frequently, please raise the set
temperature or switch to Power Heat mode.

910
LED Display
Dreo Oil Filled Heater Dreo Oil Filled Heater
1.
2.
3.
4. Note: During heating, the display will light up the Heat Indicator
Note:
Child Lock is not available in the remote control.
Child Lock
Long press the for 3s to activate/deactivate the Child Lock
function, when activated the display will light up , and all the
buons on the heater will be locked.
More Features
Memory Function
Defrost Mode
Tip-Over Protection
The heater will remember its last
seings (temperatures, working
modes ) once turned on again.
To prevent freezing conditions, you
can set up your target temperature
above 5℃in ECO mode, this will allow
the heater to heat up in high heat
mode whenever temperatures fall
below the target.
For your safety, when the heater is
tipped over, it will shut o automatical-
ly. To restore it, place it back up and
wait for the indicator to light on to
turn the heater on.
Overheat Protection
When the heater overheats, it will
stop heating automatically.
When the heater is on, touch to set a timer (0-24h). After the
timer ends, the heater will turn o automatically.
When the heater is o, touch to set a timer (0-24h). After the
timer ends, the heater will turn on automatically.
To cancel, press the timer buon again or set the timer to “——”
hour.
Long press for 3s to activate/ deactivate Child Lock.
Timer
Plugged in Heat Indicator
Mute ECO Mode
Heat Level / Set Temperature / Timer Hour
Timer Child Lock
Heat Level
To turn on/o the buon sounds, long press the Mode
buon on the panel for 3s.
Mute
/Unmute
In Power Heat mode, touch or to adjust the heating level.
In ECO mode, touch or to adjust the set temperature.
In Timer mode, touch or to set the timer between (0-24h).
Heat Level/ Temperature / Timer Hour

910
LED Display
Dreo Oil Filled Heater Dreo Oil Filled Heater
1.
2.
3.
4. Note: During heating, the display will light up the Heat Indicator
Note:
Child Lock is not available in the remote control.
Child Lock
Long press the for 3s to activate/deactivate the Child Lock
function, when activated the display will light up , and all the
buons on the heater will be locked.
More Features
Memory Function
Defrost Mode
Tip-Over Protection
The heater will remember its last
seings (temperatures, working
modes ) once turned on again.
To prevent freezing conditions, you
can set up your target temperature
above 5℃in ECO mode, this will allow
the heater to heat up in high heat
mode whenever temperatures fall
below the target.
For your safety, when the heater is
tipped over, it will shut o automatical-
ly. To restore it, place it back up and
wait for the indicator to light on to
turn the heater on.
Overheat Protection
When the heater overheats, it will
stop heating automatically.
When the heater is on, touch to set a timer (0-24h). After the
timer ends, the heater will turn o automatically.
When the heater is o, touch to set a timer (0-24h). After the
timer ends, the heater will turn on automatically.
To cancel, press the timer buon again or set the timer to “——”
hour.
Long press for 3s to activate/ deactivate Child Lock.
Timer
Plugged in Heat Indicator
Mute ECO Mode
Heat Level / Set Temperature / Timer Hour
Timer Child Lock
Heat Level
To turn on/o the buon sounds, long press the Mode
buon on the panel for 3s.
Mute
/Unmute
In Power Heat mode, touch or to adjust the heating level.
In ECO mode, touch or to adjust the set temperature.
In Timer mode, touch or to set the timer between (0-24h).
Heat Level/ Temperature / Timer Hour

11 12
CLEANING AND
MAINTENANCE
ATTENTION
DO NOT unscrew
the unit.
DO NOT use
cleaning agents.
DO NOT use
abrasive scrubbers.
Fire or electrical shock hazard.
DO NOT immerse the main unit in water.
NEVER allow water to get inside the heater.
Except for cleaning, any servicing
should be performed by an authorized
service representative.
Store in a cool, dry area and keep the
cable out of high-traic areas to avoid
tripping hazards.
Always turn o and unplug before
cleaning.
Outer Surface
Use a soft, dry cloth to gently wipe
clean the outer surface.
Dreo Oil Filled Heater Dreo Oil Filled Heater
5
This product contains a lithium buon/coin cell baery. If a new or
used lithium buon/coin cell baery is swallowed or enters the body,
it can cause severe internal burns and can lead to death in as lile
as 2 hours. Always completely secure the baery compartment. If
the baery compartment does not close securely, stop using the
product, remove the baery, and keep it away from children. If you
think baeries might have been swallowed or placed inside any part
of the body, seek immediate medical aention.
The baeries must bedisposed of properly, including keeping them
away from children. Even used cells may cause injury.
Chemical Burn Hazard.
Keep baeries away from children.
WARNING
Remote Control
1. Press the locking buon to pop out the baery holder.
2. Replace with the same baery type with the (+) side facing up.
3. Push in the holder until securely locked into place.
Baery Replacement
Note: When display dimming is on, pressing any buon will turn the
display back on, if no action is taken, the display will automatically
dim after 10 seconds.
Note: If the indicator on the remote control doesn’t turn on anymore,
please consider replacing the baery.
Power On/O
Timer
Mute
Mode
Display Dimming On/O
Heat Level - /
Temp - /Time - Heat Level + /
Temp + /Time +
CR2025 3V
1
2
3

11 12
CLEANING AND
MAINTENANCE
ATTENTION
DO NOT unscrew
the unit.
DO NOT use
cleaning agents.
DO NOT use
abrasive scrubbers.
Fire or electrical shock hazard.
DO NOT immerse the main unit in water.
NEVER allow water to get inside the heater.
Except for cleaning, any servicing
should be performed by an authorized
service representative.
Store in a cool, dry area and keep the
cable out of high-traic areas to avoid
tripping hazards.
Always turn o and unplug before
cleaning.
Outer Surface
Use a soft, dry cloth to gently wipe
clean the outer surface.
Dreo Oil Filled Heater Dreo Oil Filled Heater
5
This product contains a lithium buon/coin cell baery. If a new or
used lithium buon/coin cell baery is swallowed or enters the body,
it can cause severe internal burns and can lead to death in as lile
as 2 hours. Always completely secure the baery compartment. If
the baery compartment does not close securely, stop using the
product, remove the baery, and keep it away from children. If you
think baeries might have been swallowed or placed inside any part
of the body, seek immediate medical aention.
The baeries must bedisposed of properly, including keeping them
away from children. Even used cells may cause injury.
Chemical Burn Hazard.
Keep baeries away from children.
WARNING
Remote Control
1. Press the locking buon to pop out the baery holder.
2. Replace with the same baery type with the (+) side facing up.
3. Push in the holder until securely locked into place.
Baery Replacement
Note: When display dimming is on, pressing any buon will turn the
display back on, if no action is taken, the display will automatically
dim after 10 seconds.
Note: If the indicator on the remote control doesn’t turn on anymore,
please consider replacing the baery.
Power On/O
Timer
Mute
Mode
Display Dimming On/O
Heat Level - /
Temp - /Time - Heat Level + /
Temp + /Time +
CR2025 3V
1
2
3

6
TROUBLESHOOTING
Malfunction
codes on LED
display
Heater does
not start/
The heater
suddenly stops
during heating.
E1 - Temperature sensor
open circuit
Unplug it from the power
source and contact
Customer Support.
Place the heater back on a
flat, level and stable surface
and wait for the indicator
to light to turn the heater on.
Unplug the heater and allow
it to cool before plugging it
back again.
Remove any objects on or
near the heater.
Unplug it from the power
source and contact
Customer Support.
E2 - Temperature sensor
short circuit
The heater was tipped
over.
The heater surpassed
the Overheat protection.
13 14
If your problem is not listed or still persists, contact our Customer
Support (see page 16).
Dreo Oil Filled Heater Dreo Oil Filled Heater
Problem Possible Causes Solution
No power is passing
through the unit.
In ECO mode, the set
temperature is lower than
the ambient temperature.
Heater does
not start/
The heater
suddenly stops
during heating.
The heater
doesn’t raise
temperature
Ensure that your circuit
breaker or fuse is working
properly.
Ensure that your heater is
placed on a flat and even
surface.
Ensure that the temperature
is set to be higher than the
ambient temperature.
In ECO mode, the heater
will turn o heating
automatically when the
set temperature has
been reached.
Temperature raises
too slowly
Only heats a small area.
ECO mode doesn’t reach
my target temperature.
This is normal. If your heater
turns o frequently, please
raise the set temperature or
switch to Power Heat mode.
This heater uses convec-
tion, which may take longer,
but allows it to deliver heat
uniformly without making air
too dry. You can use the
timer function to heat your
room beforehand (see
instructions on page 9.)
This heater is not
recommended for open
areas or outdoor use.
If you are farther away from
your heater, you can raise
the target temperature or
switch to Power Heat mode.

6
TROUBLESHOOTING
Malfunction
codes on LED
display
Heater does
not start/
The heater
suddenly stops
during heating.
E1 - Temperature sensor
open circuit
Unplug it from the power
source and contact
Customer Support.
Place the heater back on a
flat, level and stable surface
and wait for the indicator
to light to turn the heater on.
Unplug the heater and allow
it to cool before plugging it
back again.
Remove any objects on or
near the heater.
Unplug it from the power
source and contact
Customer Support.
E2 - Temperature sensor
short circuit
The heater was tipped
over.
The heater surpassed
the Overheat protection.
13 14
If your problem is not listed or still persists, contact our Customer
Support (see page 16).
Dreo Oil Filled Heater Dreo Oil Filled Heater
Problem Possible Causes Solution
No power is passing
through the unit.
In ECO mode, the set
temperature is lower than
the ambient temperature.
Heater does
not start/
The heater
suddenly stops
during heating.
The heater
doesn’t raise
temperature
Ensure that your circuit
breaker or fuse is working
properly.
Ensure that your heater is
placed on a flat and even
surface.
Ensure that the temperature
is set to be higher than the
ambient temperature.
In ECO mode, the heater
will turn o heating
automatically when the
set temperature has
been reached.
Temperature raises
too slowly
Only heats a small area.
ECO mode doesn’t reach
my target temperature.
This is normal. If your heater
turns o frequently, please
raise the set temperature or
switch to Power Heat mode.
This heater uses convec-
tion, which may take longer,
but allows it to deliver heat
uniformly without making air
too dry. You can use the
timer function to heat your
room beforehand (see
instructions on page 9.)
This heater is not
recommended for open
areas or outdoor use.
If you are farther away from
your heater, you can raise
the target temperature or
switch to Power Heat mode.

7
We’re Here to Help!
[e-mail] www.dreo.com
Rev_1.2_UK
Shenzhen Hesung Innovation
Technology Co., LTD
26F, Bldg A7, Creative City, Shenzhen, China
15 16
DREO CUSTOMER
CARE
Default 24-Month Warranty
Extend Your Warranty
This appliance is covered by Dreo warranty for 24 months from the date of
its original purchase.
The warranty will not apply in cases of:
Extend your warranty by registering your new appliance on our website
hps://dreo.com/warranty.
1.
2.
3.
4.
5.
6.
7.
Dreo Oil Filled Heater Dreo Oil Filled Heater
We can only provide after-sales service for products that are sold by Dreo
or Dreo authorized retailers and distributors. If you have purchased the
appliance from a dierent place, please contact your seller for return and
warranty issues.
Accident, misuse, or repairs performed by unauthorized personnel.
Any unit that has been tampered with or used for commercial purposes.
Normal wear and tear of wearable parts.
Use of force, damage caused by external influences.
Damage caused by non-observance of the User Manual, e.g. connection to
an unsuitable mains supply or noncompliance with the instructions.
Partially or completely dismantled appliances.
Defects caused by or resulting from damages from shipping or from
repairs, service, or alteration to the product or any of its parts that have
been performed by a repair person not authorized by Dreo.
MADE IN CHINA
This marking indicates that this product should not be disposed of with other household
waste throughout the EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device,please use the return and
collection system or contact the retailer where the product was purchased. They can
take this product for environmentally safe recycling.
Correct Disposal of this product
ltem
Model identifier : DR-HSH010
ltem Unit
Unit
Symbol Value
Heat output
Nominal heat output manual heat charge control, with integrated
thermostat
Type of heat input, for electric storage
local space heaters only (select one)
Pnom
Pmin
2.0
2.0
kW No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
No
Minimum heat
output(indicative) manual heat charge control with room and/ or
outdoor temperature feedback
0.8 kW
kW
kW
kW
kW
No
Maximum contin-
uous heat output Pmax,c electronic heat charge control with room
and/or outdoor temperature feedback
fan assisted heat output
Auxiliary electricity
consumption
At nominal heat output elmax
elmin
elSB
0.000
0.000
0.00040
At minimum heat output single stage heat output and no room
temperature control
In standby mode Two or more manual stages, no room
temperature control
with mechanic thermostat room
temperature control
with electronic room temperature control
electronic room temperature control plus
day timer
electronic room temperature control plus week
timer
room temperature control, with presence
detection
room temperature control, with open
window detection
with distance control option
with adaptive start control
with working time limitation
with black bulb sensor
Contact details Refer to Applicant Name: Shenzhen Hesung Innovation Technology Co., LTD.
Address: 26F, Bldg A7, Creative City, Shenzhen, China.
Type of heat output/room temperature control (select one)
Other control options (multiple selections possible)
Information requirment for the electric local space heaters: