dreo DR-HSH011 User manual

DREO
Oil Filled Heater
USER MANUAL

Thanks for
Choosing
DREO!
Your support means the world to us. We
hope you enjoy our product as much as
we did creating it

Extend
Your Warranty
for Free
or visit dreo. /warranty
warranty for fr te ur product
@ www.dreo.com
@ (s88) 2901688
Mon - Fri, 9:00 am-5:00 pm PST/PDT

CONTENTS
IMPORTANT
SAFETY
INSTRUCTIONS
1-4
USING YOUR CLEANING AND
HEATER MAINTENANCE
8-11 12

ASSEMBLING KNOWING
YOUR YOUR
HEATER HEATER
5-6 7
TROUBLE- DREO CUSTOMER
SHOOTING CARE
13-14 15-17

IMPORTANT SAFETY
INSTRUCTIONS
When using electrical
appliances; basic
precautions should
always be followed to
reduce the risk of fire, Do not use the
electric shock and POotCONE Ol-fled heater
, near flammables
in!:ltrj\{jingpthe Tollowing: N operation and combustibies:
GENERAL SAFETY
Read allinstructions before using this heater.
This heater is hot when in se. To avoid burns, do not let bare skin touch hot surfaces.
Use the handle to move this heater.
Extreme caution is necessary when any heater s used by or near children of invalids and
whenever the heater s left operating and unattended
Donotinsertor allow foreign objects to enter any ventilation or exhaust opening s this
may cause an electric shock or fire, or damage the heater.
The output of this heater may vary and ts temperature may become hot enough to bur
exposed skin. Use of this heater is not recommended for persons with a high sensitivity to
heator aninabilty to react to avoid bums
7.Donot attempt to modify or repair the product by yourself. Doing 5o could void the
warranty and cause damage or personal injury. Only a repair technician may disassemble
orrepair this product
8.Make sure that no pieces of polystyrene or other packaging material have beenleft
between elements of the appliance. It may be necessary to pass over the appliance with a
vacuum cleaner.
9.Ifthe machine is not working as t should, has received a sharp blow, has been dropped,
‘damaged. left outdoors, or dropped into water, do not use and contact Customer Support
10.There may be a trace of smoke or odor when the unit is first operated. This indicates thata
arop of ol fell on the heating coil during the manufacturing process. It will quickly
evaporate and should not re-occur.

LOCATION SAFETY
1. Donot use outdoors.
2.Ensure the heateris on a stable, secure surface to eliminate the potential of tipping it over.
3. Keep combustible materials, such as furniture, pilows, bedding, papers, clothes, and
curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the
sides andrear.
4. Aheater has hot and arcing or sparking parts inside. Do not use itin areas where gasoline,
paint,or flammable liquids are sed or stored
5.To prevent a possible fire, do ot block ir intakes or exhaust in any manner. Do not use on
soft surfaces, lie a bed, where openings may become blocked.
6.This heateris not intended for use in bathrooms, laundry areas and similar indoor locations.
Never locate heater where it may fallinto a bathtub or other water container.
ELECTRICITY SAFETY
1. Always unplug heater when not in use.
2.Donot operate any heater with a damaged cord or plug or after the heater malfunctions,
has been dropped or damaged in any manner. Dicard heater, or return to authorized
service facility for examination and/or repair.
3.Donot run cord under carpeting. Do not cover cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic
areaand where it will ot be tripped over.
4.Todisconnect heater, turn controls to off, then remove plug from outlet.
5. Always plug heaters directly into awall outietireceptacle.
6.Never use with an extension cord or relocatable power tap (outiet/power strip)
7. Ifthere s aloose fit between the plug and the socket or the plug becomes very hot, the
socket may need to be replaced. Check with a qualified electrician to replace the socket.
8. Itis normal for the plug and cord to feel warm to the touch
9. Aplug or cord which becomes hot to the touch or becomes distorted in shape may be
result of a worn electrical outlet. Worn outlets or receptacies should be replaced prior to
further use of the heater. Plugging the heater into a worn outlet / receptacie may result in
overheating of the power cord of fire.
10.This appliance has a polarized plug (one prong is wider than the other). To reduce the risk
of electric shock, this plugis intended tofitin a polarized piug. If the plug does not it fully
inthe outlet, reverse the plug. Ifit stilldoes not fit, contact a qualified electrician. Do not
attempt torig this safety feature.
1. Hyperthermia can resultin death. Symptoms of hyperthermia include high body
temperature, headache, nausea, vomiting, tiredness, dizziness, fainting, and rapid pulse. I
you beginto experience symptoms related to hyperthermia, tur off the heater and seek
medical attention.
DreaOiFled eater 2 ———

12. To avoid excessive room temperatures which can cause hyperthermia: DONOT leave
product running unattendedina confined space around infants, or individuals with
reduced physical, sensory, or mental capabilties.
13. Use this heater only as described n this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, o injury to persons.
14 CAUTION - High temperature, keep electrical cords, drapery, and other furnishings at
least 3 feet (0.9m) from the front of the heater and away from the side and rear
WARNING - Risk of Hyperthermia.
WARNING - Risk of Heat Stroke
(Hyperthermia)
Hyperthermia can result in death in infants or others
Use caution to avoid overheating individuals
Read and follow all instructions before use
FOR HOUSEHOLD USE ONLY
READ AND SAVE
THESE INSTRUCTIONS
3 DreoOiFletieate

Gentle Reminder: Specifications
Checkthe appliance regularly and Model DR-HSHOI
refer to TROUBLESHOOTING or
contact our customer support if Rated Power 1500
it shows any of the following
signs Input 120V~ 60Hz
-Power cord or plug is damaged,
LG noe, inustalsmel o excessiveneat. | | RemoteControl | crangs, 3y
Battery
HOT SURFACE
THE HEATER CAN BE VERY HOT ON THE SIDES AND REAR,
ONLY THE FRONT PANEL AND HANDLE ARE SAFE TO
TOUCH DURING USE.
DreoOlFeateater 4 ——

ASSEMBLING YOUR
HEATER
Package Contents
fi endie
LED Display HB‘B
Control Panel Fins
Ambient Temperature
Indicator
=
Power & Plug
]
user | | Quick s
Manual a =)
anvel || Guide
5 DreoOiFletieate

Assembly Instructions
When using the appliance for the first time, remove the wraps and attach the
parts by following the steps below.
Handle
1.Place the heater upside down 2.Setthe heater upright. Use.
and unfold all the casters. therear handle tomove tothe
desired location.
WARNING
Tip-over hazard.
Donot operate without the casters properly installed.
Fire hazard.
Operate the heater in the pright position only. Any other
position can cause damage to this heater and evenafire
hazard.
Burn hazard.
Unplug and allow the heater to cool before using the
handle tomove the heater.
DreoOFledHester 6 ———

KNOWING YOUR
HEATER
Getting the Most Out of Your Heater
1.Put the heater by the window to block the
penetration of cold ai from outside.
2 Keep curtains and other furniture at
least 3 ft/ Imaway from the heater.
Even @ Cold
warm air air
Warm air
a0
Whatto Do What Not to Do
Putit by the window to get even warm air
7 DreOiHedteate
If you put it near the door, cold air invades
and warm air escapes easily.

USING YOURHEATER
Before First Use
‘The first time the appliance is used, run it at the maximum power for at least two hours. During
this time, ventilate the room thoroughly to eliminate the “new” smell release by the appliance.
Itis completely normal for the appliance to emit *creaking” sounds the first time it is run.
Control Panel
Power On/Off
Touch to tur the heater on or off.
Long press for 10 torestore factory settings.
Note:
When the heater is plugged into the electric outlet, the power
indicator () willlight in red,
Mode Settings
Touchto cycle through ECO and Power Heat modes.
Power Three heating levels
Heat 111(600W), H2(900W), H3(1500W).
The display will show H1, H2 or H accordingly:
-_— HI - Low heat mode
— H2 - Medium heat mode
m— 15 - High heat mode:
ECO Theheater will automatically select its optimal heating
power. depending on the difference between the set
temperature (41-95°F) and ambient temperature.
Note:
+When the ambient temperature drops below the set
temperature, the heater will adjust the power depending
on the difference between the two temperatures.
+InECO mode, the heater willturn off automatically when
the set temperature has been reached.
Ifyour heater turns offfrequently, please raise the set
temperature or switch to Power Heat mode.
DreoOFedteater 8 ———

Note: During heating. the display willlight up the Heat Indicator
9 breoi il Hoater
B0 rowmaniotne button sounds, long press the Mode:
"
Jute ptton ) on the panel for 3.
Timer
1.When the heater is on, touch to set a timer (0-24h). After the timer
ends, the heater will turn off automaticaly.
2.Whenthe heater is off, touch to set atimer (0-24h). After the timer
ends, the heater will turn on automatically.
3.To cancel, press the timer button again or set the timer to -
4. Long press for 3s to activate/ deactivate Child Lock.
* hour.
Heat Level/ Temperature / Timer Hour
In Power Heat made, touch (@ or © to adjust the heating evel
InECOmode, touch @ or © to adjust the set temperature.
In Timer made, touch @) or Q) to st the timer between (0-24)
child Lock
Long press the (@) for 3s to activate/deactivate the Child Lock
function, when activated the display wil light up (&) and all the
buttons on the heater il be locked.
Note:
Child Lock s not avalable i the remote control.

Ambient Temperature Indicator
Besides the LED display, your new oil-illed heater comes with an
additional LED indicator that et you see the ambient temperature
& condition even from far away.
| Cold Comfort Warm Hot
More Features
Memory Function
The heater will remember its last
settings (temperatures, working
modes) once turned on again.
Defrost Mode
Toprevent freezing conditions, you
can setup your target temperature
‘above 41°F in ECO mode, this willallow
the heater to heat up in high heat
mode whenever temperatures fall
below the target
Display Auto Dimming
Inlow light conditions, the display
and ambient temperature indicattor
lights will automaticaly dim, if no
action s taken, lights will go off
automatically after 10 seconds.
Tip-Over Protection
For your safety, when the heateris
tipped over, it willshutoff
automaticaly. Torestoreit, place it
back up and wait for the & indicator
tolight on toturn the heater on.
Overheat Protection
When the heater overheats, it will stop
heating automatically with the error
‘code*FF” on the display.

Remote Control
Power ON/Off
Heat Level -/ Heat Level + /
Temp- iTime - Temp+ /Time +
Mode Mute
Ambient Temperature .
ndicator
On/Off
mer
Battery Replacement
1. Press the locking button to pop out the battery holder.
2. Replace with the same battery type with the (+) side facing up.
3.Pushin the holder until securely locked into place.
Note: Ifthe ngicator on the remote control doesrt turn on anymore,
please consider replacing the battery.
WARNING
Chemical Burn Haz
Keep batterie
This produc in cell battery.If anew or
used lithium button/coin cell b wallowed or ente body
t ere internal b athin aslittle
vays completely st ery compartment. If
tery compartment does not close securely, stop using th
. remove the batt away from children. If you
think b night hax par
of the body, seek immediate medical attent
The batteries must be dispos
hildren. Even
ed of properly, including keeping ther
Ils may cause injur away se
1 recOFledteate

CLEANING AND
MAINTENANCE
Aways turn offar Outer Surface
ing Use asoft, dry cloth to gently wi
outer surface.
DONOT unscrew DONOT use DONOT use
the unit; cleaning agents abrasive scrubbers.
Fire or electrical shock hazard. DO
NOT immerse the main unit in water.
NEVER ai rto getinside the
heater.
Except for cleaning, any servicing
should be performed by an authorized
service representative.
Store ina cool, dry are
able out of high-traffic
tripping hazards.
eepthe
as to avoid
@)@
Dreo Olfecteater 12

TROUBLESHOOTING
Malfunction
codes on LED
display
Heater does
not start/
The heater
suddenly stops
during heating.
ssible Causes
FF - Overheat Protection
E1 - Temperature sensor
open circuit
E2- Temperature sensor
short circuit
The heater was tipped
over.
The heater surpassed
the Overheat protection.
Unplug and wait for it to
cool down before plugging
again.
Unplugit from the power
source and contact
Customer Support.
Unplug it from the power
source and contact
Customer Support.
Place the heater backona
flat, level and stable surface
and wait for the & indicator
tolight to turn the heater on.
Unplug the heater and allow
it to cool before plugging it
back again.
Remove any objects on or
near the heater.

Ensure that your circuit
breaker or fuse is working
properly.
Ensure that your heateris
placed onafiat and even
surface.
Ensure that the temperature
is setto be higher than the
ambient temperature.
This heater uses convec-
tion, which may take longer,
but allows it to deliver heat
uniformly without making air
o0 dry. You can use the.
timer function to heat your
room beforehand (see
instructions on page 9.)
This heater is not
recommended for open
areas or outdoor use.
Ifyou are farther away from
your heater, you can raise
the target temperature or
switch to Power Heat mode.
“This is normal. If your heater
turns off frequently, please
raise the set temperature or
switch to Power Heat mode.
If your problem is not listed or still persists, contact our Customer
Support (see page 15).
Dreo OiFeatieater 14—

DREO CUSTOMER
CARE
Default 12-Month Warranty
This appliance is covered by Dreo warranty for 12 months from the date of
its original purchase.
Extend Your Warranty
Extend your warranty by registering your new appliance on our website
https://dreo.com/warranty..
The warranty will not apply in cases of:
. Accident, misuse, or repairs performed by unauthorized personnel
Any unit that has been tampered with or used for commercial purposes.
2.
3. Normal wear and tear of wearable parts
4. Use of force, damage caused by external infiuences
5
Damage caused by non-observance of the User Manual, e.g. connection to
an unsuitable mains supply or noncompliance with the instructions,
o
Partially or completely dismantled appliances.
~
Defects caused by or resulting from damages from shipping or from
repairs, service, or alteration to the product or any of its parts that have
been performed by a repair person not authorized by Dreo.
We can only provide after-sales service for products that are sold by Dreo
orDreo authorized retailers and distributors. If you have purchased the
appliance from a different place, please contact your seller for return and
warranty issues.
———15 DracOiFledteater