dreo DR-HSH007 User manual

DREO
PTC Fan Heater
USER MANUAL
T

Thanks for
Choosing
DREO!
Your support means the world to us. We
hope you enjoy our product as much as
we did creating it

Extend Warranty
to 30 Months
Scan or visit dreo.com/warranty
to extend your warranty for free by registering your product.
If you have any product issues, we always stand ready to help.
A=l @ supportadreo.com
@ www.dreo.com
'.'rgxhifl. O [phone]
Mon-Fri,9:00am-5:00 pmPST/PDT
d

CONTENTS
IMPORTANT SAFETY
INSTRUCTIONS
1-4
CLEANING AND
MAINTENANCE
11-12

KNOWING YOUR
USING YOUR
HEATER HEATER
5 6-10
TROUBLE- DREO CUSTOMER
SHOOTING CARE
13-14 15-16

1 DreoPTCRAN
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical @ @
appliances, basic
precautions should
always be followed to
reduce therisk of fire, warning:
BEPCIRE
Wy,
ponotuserne
injury to persons and
hyperthermia,
inclug-
~
©verheating,
donot
-
near
flammables
ing the following: covertheheater. and combustibles.
GENERAL SAFETY
. Read all Instructions before using this heater.
. This heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces.
. Use the handle to move this heater.
. Extreme caution is necessary when any heater is used by or near children or
invalids and whenever the heater is left operating and unattended.
. Donot insert or allow foreign objects to enter any ventilation or exhaust opening
asthis may cause an electric shock or fire, or damage the heater.
. The output of this heater may vary and its temperature may become hot enough
o burn exposed skin. Use of this heater is not recommended for persons witha
high sensiticity to heat or an inability to react to avoid burns,
7. Do not attempt to modify or repair the product by yourself. Doing so could void
the warranty and cause damage or personal injury. Only arepair technician may
disassemble or repair this product.
. Make sure that no pieces of polystyrene or other packaging material have been
left between elements of the appliance. It may be necessary to pass ovear the
appliance with avacuum cleaner.
Ifthe machine is not working as it should, has received a sharp blow, has
and dropped, damaged, left outdoors, or dropped into water, do not use
and ccontact Customer Support.
0. There may be atrace of smoke or odor when the unit s first operated.This
indicates that a drop of oil fell on the heating coil during the manufacturing
process. It will quickly evaporate and should not re-occur.
o
o
orw
Mo
©
ATER

LOCATION SAFETY
1. Donot use outdoors.
. Ensure the heater is ona stable, secure surface to eliminate the potential of
tipping it over.
. Keep combustible materials, suchas funiture, plliows, bedding, papers,
clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and
keep them away from the sides and rear.
Aheater has hot and arcing or sparking parts Inside. Do not use it in areas
where gasoline, where gasoline, paint, or flammable liquids are used or
stored
Toprevent a possiblefire, do not block air intakes or exhaust in any manner.
Do not use on soft surfaces, lie abed, where openings may become
blocked
. This heater is not intended for use in bathrooms, laundry areas and similar
indoor locations.Never locate heater where it may fallinto a bathtub or
other water container.
ELECTRICITY SAFETY
1. Always unplug heater when not in use.
2. Donot operate any heater with a damaged cord or plug or after the heater
malfunctions, has been dropped or damaged in any manner. Discard heater,
or return to authorized service facility for examination and/or repair.
3.Donot run cord under carpeting. Do not cover cord with throw rugs, runners,
or similar coverings. Do not route cord under furniture or appliances. Arrange
cord away from traffic area and where it will not be tripped over.
4. Todisconnect heater, turn controlsto off, then remove plug from outlet.
5. Always plug heaters directly into a wall outlet/receptacle.
6. Neve)r use with an extension cord or relocatable power tap (outlet/powe
strip).
7. Ifthere s aloose fit between the plug and the socket or the plug becomes
very hot, the socket may need to be replaced. Check with a qualified
electrician toreplace the socket.
8.1tis normal for the plug and cord to feel warm to the touch.
9. Aplug or cord which becomes hot to the touch or becomes distorted in
shape may be aresult of aworn electrical outlet. Worn outlets or receptacles
should be replaced prior to further use of the heater. Plugging the heater into
awormn outlet / receptacle may result in overheating of the power cord or fire.
. This appliance has a polarized plug (one prong is wider than the other) .
Toreduce the rick of electric shock, this plug s intended tofit in a polarized
plug. Ifthe plug does not fit fully in the outlet, reverse the plug. If t still does
not fit, contact a qualified electrician. Do not attempt torig this safety
feature
1. Hyperthermia can result in death. Symptoms of hyperthermia include high
body temperature, headache, nausea, vomiting, tiredness, dizziness,
fainting, and rapid pulse.If you begin to experience symptoms related to
hyperthermia, turn off the heater and seek medical attention
Drea PTC FAN HEATER 2
w
N
= o
o
3

12.To avoid excessive room temperatures which can cause hyperthermia
DONOT leave product running unattended in a confined space around
infants, or individuals with reduced physical, sensory, or mental
capabilities.
13.Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock,
orinjury to persons.
14.CAUTION - High temperature, keep electrical cords, drapery,
andotherfurnishings at least 3 feet (0.9 m) from the front of the
heater and away from the side and rear.
'WARNING - Risk of Hyperthermi:
& WARNING - Risk of Heat Stroke
(Hyperthermia)
Hyperthermia can result in death in infants or others
Use caution to avoid overheating individuals
Read and follow all instructions before use
FOR HOUSEHOLD USE
ONLY
READ AND SAVE THESE
INSTRUCTIONS
3 DreoPTCFANHEATER

Gentle Reminder: Specifications
Checkthe appliance regularly y
and refer to TROUBLESHOOTING Vel Doy
or contact our customer support
ift shows any of the following
signs
& Rated Power 1500W
-Power cord or plug is damaged.
- Loud noise, unusual smell or excessive heat. Input 120V~ 60Hz
HOT SURFACE
THE FRONT SURFACE CAN BE
VERY HOT DURING USE.
DONOT TOUCH WHEN IN USE.
Dre0 PTC FAN HEATER 4 ———

KNOWING YOUR
HEATER
Package Contents
Handle
Air Inlet
User || Quick
start
Manual || St
Power & Plug
B Dreo PTCFANHEATER
Control Panel
LED Display
Air Outlet

USING YOUR
HEATER
Control Panel
V)
(5)
Power On/Off
Touch to turn the heater on o off.
Note:
-When the heater is plugged into the electric outlet,
the power indicator & willlight in red.
- Once turned off, a 30-second countdown will show
up on the display as the fan will continue to run for 30
seconds to blow out the remaining heat.
Heat Mode Setting
Touch to cycle through (H3 - H2-H1-Fan Only) in
Heat mode.
Touch to switch to Heat mode in ECO mode.
)- Power heat with three heating levels:
H1(1000W), H2 (1300W), H3 (1500W).
B ranony
ECO Mode Setting
~Touch (® or () to enter ECO mode and adjust the set
temperature.
The heater will automatically select its optimal heating
power, depending on the difference between the
settemperature (41-95°F) and ambient temperature.
Dreo PTC FAN HEATER 6 ———

@
©60/0
00O
7 Dreo PTCFANHEATER
Note:
- When the ambient temperature reaches the set
temperature, the heater will turn off automatically in
30 seconds.
- When the ambient temperature drops below the
set temperature, the heater will operate on low
or high power (1000W or 1500W), depending on the
difference between the two temperatures.
-If your heater turns off frequently, please raise the
temperature, or switch to Heat mode.
Auto-Off Timer
-When the heater is on, touch to set a timer
(0-12h). After the timer ends, the heater will turn off
automatically.
+Tocancel, set the timer to 0 hour.
Touch (S) to turn on /off oscillaton.
Child Lock
Long press (@) for 3s to activate / deactivate the
Child Lock function, when activated, the ® on the
display willlight up, and all the buttons on the space
heater will be locked.
Mute/Unmute
‘Touch to turn on/off the button sounds.

LED Display
Fan Only
ECO
The heat will automatically select
its optimal heating power,
depending on the difference
between the set and ambient
temperature.
Power Heat with three
heating levels:
H1(1000W)
H2(1300W)
H3(1500W)
Remote Control
Power Indicator
Power
SetTemp- + SetTemp+
(ECOMode) (ECOMode)
Heat Mode ) Mute
Oscillation vl e Timer
Dre0 PTC FAN HEATER § ———

Battery Replacement
@ Press thelocking button to pop
out the battery holder.
@ Replace with the same battery
type with the (+) side facing up.
© Pushin the holder until securely
locked into place.
Note: If the indicator on the remote
control doesn't turn on any more,
please consider replacing the
battery.
WARNING
Chemical Burn Hazard. Keep batteries away
from children.
“This product contains a lithium button/coin cell battery. If a new or
used lthium button/coin cell battery is swallowed or enters the body,
it can cause severe internal burns and canlead to death n as lttle
252 hours. Always completely secure the battery compartment. If
the battery compartment does not close securely, stop using the
product, remove the battery, and keep it away from children. If you
think batteries might have been swallowed or placed inside any part
of the body, seek immediate medical attention
The batteries must be disposed of properly. including keeping them
‘away from children. Even used cells may cause injury.
9 DreoPTCFANHEATER

More Features
Display auto turns
off after 1 minute.
Memory Function Tip-Over Protection
The heater will remember its When the heater is tlpped over,
last settings (temperatures, it will shut off automatically
working modes, oscillation with the error code * P4 *
status) once turned on again. onthe display.
24-Hour Auto Off Overheat Protection
This feature s not ON by When the heater overheats,
default it will shut off automatically
with the error code * FF *
When this feature is ON, the on the display.
heater will shut off automati-
cally after continuously
running for 24 hours.
Long press the timer for 3
seconds to turn this feature
ONJOFF when this heater is on
standby. The display will show
“ON" and "OF" respectively.
Dre0 PTC FAN HEATER 10—

CLEANING AND
MAINTENANCE
Always turn off and unplug before cleaning.
Outer Surface
7 Use a soft, dry cloth to gently wipe clean
the outer surface.
Air Inlet
Use a soft, dry cloth or a cotton-tipped
swab to remove any dust from the air inlet
11 Dreo PTCFANHEATER

A ATTENTION
&
DONOT unscrew DONOT use DONOT use
the unit, cleaning agents. abrasive scrubbers
Fire or electrical shock hazard.
DO NOT immerse the main unit in water.
NEVER allow water to get inside the heater.
Except for cleaning, any servicing
should be performed by an authorized
service representative.
Storeinacool, dry area and keep the
cable out of high-traffic areas to avoid
tripping hazards.
O6E
Dre0 PTC FAN HEATER 12—

TROUBLESHOOTING 5
S e m
Unplug it from the power
source and contact
Customer Support.
E2- Temperature
sensor short circuit
BT Unplug it from the power
source and contact
Malfunction SN EELE Customer Support.
codes on LED
display -G Unplug and wait for it
i o cool down before
plugging in again.
Place the heater backon
B wip-Over afiat, level and stable
oectel surface.
R Connecttheplugto
apowered electrica
properly plugged in. P
Heater does
Unplug and allow it to
not start o
Overheat protection
has been activated.
Remove any objects on
or near the heater.
13 Dreo PTCFANHEATER

Heater does
not start
The heater
suddenly
stops during
heating.
No power is passing
through the unit
The set temperature
is lower than the
ambient temperature.
The temperature
exceeds the threshold
of the thermal cutoff.
The heater istipped
over.
INECOmode, the heater
willtun off automatically
when the set tempera-
ture has been reached.
Ensure that your circuit
breaker or fuse is working
properly.
Ensure that your heateris
placed onafiatand even
surface.
Ensure that the temperature
is settobe higher than the
ambient temperature.
Turn off and unplug the unit
Allow it to cool and plug into
the electrical outlet again.
Place it onafiat, level and
stable surface.
Thisis normal.If your heater
turns off frequently, please
raise the set temperature, or
switch to Power Heat mode.
If your problem is not listed or still persists, contact our Customer
Support (see page 16).
Dre0 PTC FAN HEATER 14—

DREO CUSTOMER
CARE
Default 12-Month Warranty
This appliance is covered by Dreo warranty for 12 months from the date of
itts original purchase.
Extend Your Warranty
Extend your warranty by registering your new appliance on our website
hf I dre m/warrant
The warranty will not apply in cases of:
1. Accident, misuse, or repairs performed by unauthorized personnel
2. Any unit that has been tampered with or used for commercial purposes.
3.Normal wear and tear of wearable parts.
4.Use of force, damage caused by external influences.
5. Damage caused by non-observance of the User Manual, e.g. connection
toan unsuitable mains supply or noncompliance with the instructions.
6.Partially or completely dismantled appliances
7. Defects caused by of resulting from damages from shipping or from
repairs, service, or alteration to the product or any of its parts that have
been perform ed by arepair person not authorized by Dreo.
We can only provide after-sales service for products that are sold by Dreo
or Dreo authorized retailers and distributors. If you have purchased the
appliance from a different place, please contact your seller for return and
warranty issues.
15 Dreo PTCFANHEATER