dreo Solaris Slim H2 User manual

PTC Fan Heater
User Guide
MODEL: DR-HSH002
www.dreo.com
[email protected]
[email protected]
MANUFACTURER：
Shenzhen Hesung Innovation Technology Co., LTD

1
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS -------------------------01
USING YOUR HEATER--------------------------------------------------06
Package Contents------------------------------------------------------07
Product Diagram --------------------------------------------------------07
Control Panel-------------------------------------------------------------08
Remote Control----------------------------------------------------------08
Operations and Functions -------------------------------------------09
Other Features ----------------------------------------------------------11
Replacement of Batteries in Remote Control -----------------12
Specifications ------------------------------------------------------------13
CLEANING AND MAINTENANCE -----------------------------------14
TROUBLESHOOTING----------------------------------------------------16
WARRANTY AND SERVICE-------------------------------------------19
IMPORTANT
SAFETY
INSTRUCTIONS
01
PTC Fan Heater

1
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS -------------------------01
USING YOUR HEATER--------------------------------------------------06
Package Contents------------------------------------------------------07
Product Diagram --------------------------------------------------------07
Control Panel-------------------------------------------------------------08
Remote Control----------------------------------------------------------08
Operations and Functions -------------------------------------------09
Other Features ----------------------------------------------------------11
Replacement of Batteries in Remote Control -----------------12
Specifications ------------------------------------------------------------13
CLEANING AND MAINTENANCE -----------------------------------14
TROUBLESHOOTING----------------------------------------------------16
WARRANTY AND SERVICE-------------------------------------------19
IMPORTANT
SAFETY
INSTRUCTIONS
01
PTC Fan Heater

2 3
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INFORMA-
TION AND INSTRUCTIONS.
KEEP FOR FUTURE REFERENCE.
FOR HOUSEHOLD USE ONLY
Thanks for choosing the Dreo PTC Fan Heater. Please read
this User Guide thoroughly before use and retain it for future
reference.
Read all instructions before using this heater.
Always unplug heater when not in use.
This heater is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces. If provided, use handles when
moving this heater. Keep combustible materials, such as
furniture, pillows, bedding, papers, clothes, and curtains at
least 3 feet (0.9 m) from the front of the heater and keep
them away from the sides and rear.
Extreme caution is necessary when any heater is used by
or near children or invalids and whenever the heater is left
operating and unattended.
Do not operate any heater with a damaged cord or plug
or after the heater malfunctions, has been dropped or
damaged in any manner. Discard heater, or return to
authorized service facility for examination and/or repair.
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the
following:
If there is a loose fit between the plug and the socket or
the plug becomes very hot, the socket may need to be
replaced. Check with a qualified electrician to replace the
socket.
Do not use outdoors.
This heater is not intended for use in bathrooms, laundry
areas and similar indoor locations. Never locate heater
where it may fall into a bathtub or other water container.
Do not run cord under carpeting. Do not cover cord with
throw rugs, runners, or similar coverings. Do not route cord
under furniture or appliances. Arrange cord away from
traffic area and where it will not be tripped over.
To disconnect heater, turn controls to off, then remove plug
from outlet.
Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause an
electric shock or fire, or damage the heater.
To prevent a possible fire, do not block air intakes or
exhaust in any manner. Do not use on soft surfaces, like a
bed, where openings may become blocked.
A heater has hot and arcing or sparking parts inside. Do not
use it in areas where gasoline, paint, or flammable liquids
are used or stored.
Use this heater only as described in this manual. Any other
use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons.
Always plug heaters directly into a wall outlet/receptacle.
Never use with an extension cord or relocatable power tap
(outlet/power strip).

2 3
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INFORMA-
TION AND INSTRUCTIONS.
KEEP FOR FUTURE REFERENCE.
FOR HOUSEHOLD USE ONLY
Thanks for choosing the Dreo PTC Fan Heater. Please read
this User Guide thoroughly before use and retain it for future
reference.
Read all instructions before using this heater.
Always unplug heater when not in use.
This heater is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces. If provided, use handles when
moving this heater. Keep combustible materials, such as
furniture, pillows, bedding, papers, clothes, and curtains at
least 3 feet (0.9 m) from the front of the heater and keep
them away from the sides and rear.
Extreme caution is necessary when any heater is used by
or near children or invalids and whenever the heater is left
operating and unattended.
Do not operate any heater with a damaged cord or plug
or after the heater malfunctions, has been dropped or
damaged in any manner. Discard heater, or return to
authorized service facility for examination and/or repair.
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the
following:
If there is a loose fit between the plug and the socket or
the plug becomes very hot, the socket may need to be
replaced. Check with a qualified electrician to replace the
socket.
Do not use outdoors.
This heater is not intended for use in bathrooms, laundry
areas and similar indoor locations. Never locate heater
where it may fall into a bathtub or other water container.
Do not run cord under carpeting. Do not cover cord with
throw rugs, runners, or similar coverings. Do not route cord
under furniture or appliances. Arrange cord away from
traffic area and where it will not be tripped over.
To disconnect heater, turn controls to off, then remove plug
from outlet.
Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause an
electric shock or fire, or damage the heater.
To prevent a possible fire, do not block air intakes or
exhaust in any manner. Do not use on soft surfaces, like a
bed, where openings may become blocked.
A heater has hot and arcing or sparking parts inside. Do not
use it in areas where gasoline, paint, or flammable liquids
are used or stored.
Use this heater only as described in this manual. Any other
use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons.
Always plug heaters directly into a wall outlet/receptacle.
Never use with an extension cord or relocatable power tap
(outlet/power strip).

4 5
It is normal for the plug and cord to feel warm to the touch.
A plug or cord which becomes hot to the touch or becomes
distorted in shape may be a result of a worn electrical
outlet. Worn outlets or receptacles should be replaced
prior to further use of the heater. Plugging the heater into
a worn outlet / receptacle may result in overheating of the
power cord or fire.
The output of this heater may vary and its temperature
may become hot enough to burn exposed skin. Use of
this heater is not recommended for persons with a high
sensitivity to heat or an inability to react to avoid burns.
Ensure the heater is on a stable, secure surface to
eliminate the potential of tipping it over.
Make sure that no pieces of polystyrene or other packaging
material have been left between elements of the appliance.
It may be necessary to pass over the appliance with a
vacuum cleaner.
Do not attempt to modify or repair the product by yourself.
Doing so could void the warranty and cause damage or
personal injury. Only a repair technician may disassemble or
repair this product.
Choking hazard – This remote control unit contains a small
battery. Keep the remote control away from children and
do not swallow the battery. If the battery is swallowed seek
medical advice at once.
If the machine is not working as it should, has received a
sharp blow, has been dropped, damaged, left outdoors,
or dropped into water, do not use and contact Customer
Support.
DANGER - High temperatures may be
generated under certain abnormal
conditions. Do not partially or fully cover
or obstruct the front of this heater.
READ AND SAVE THESE
INSTRUCTIONS
NOTE: There may be a trace of smoke or odor when the
unit is first operated. This indicates that a drop of oil fell on
the heating coil during the manufacturing process. It will
quickly evaporate and should not re-occur.
IMPORTANT - This appliance has a polarized plug (one
blade is wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to rig this safety feature.

4 5
It is normal for the plug and cord to feel warm to the touch.
A plug or cord which becomes hot to the touch or becomes
distorted in shape may be a result of a worn electrical
outlet. Worn outlets or receptacles should be replaced
prior to further use of the heater. Plugging the heater into
a worn outlet / receptacle may result in overheating of the
power cord or fire.
The output of this heater may vary and its temperature
may become hot enough to burn exposed skin. Use of
this heater is not recommended for persons with a high
sensitivity to heat or an inability to react to avoid burns.
Ensure the heater is on a stable, secure surface to
eliminate the potential of tipping it over.
Make sure that no pieces of polystyrene or other packaging
material have been left between elements of the appliance.
It may be necessary to pass over the appliance with a
vacuum cleaner.
Do not attempt to modify or repair the product by yourself.
Doing so could void the warranty and cause damage or
personal injury. Only a repair technician may disassemble or
repair this product.
Choking hazard – This remote control unit contains a small
battery. Keep the remote control away from children and
do not swallow the battery. If the battery is swallowed seek
medical advice at once.
If the machine is not working as it should, has received a
sharp blow, has been dropped, damaged, left outdoors,
or dropped into water, do not use and contact Customer
Support.
DANGER - High temperatures may be
generated under certain abnormal
conditions. Do not partially or fully cover
or obstruct the front of this heater.
READ AND SAVE THESE
INSTRUCTIONS
NOTE: There may be a trace of smoke or odor when the
unit is first operated. This indicates that a drop of oil fell on
the heating coil during the manufacturing process. It will
quickly evaporate and should not re-occur.
IMPORTANT - This appliance has a polarized plug (one
blade is wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to rig this safety feature.

6 7
Package Contents
Product Diagram
1 x PTC Fan Heater
1 x Remote Control
1 x Thank You Card
1 x User Guide
Control
Buttons
Power
Indicator
Air Outlet
Base
LED
Display
Handle
Rear
Cover
Power
Cord and
Plug
USING YOUR
HEATER
02
PTC Fan Heater

6 7
Package Contents
Product Diagram
1 x PTC Fan Heater
1 x Remote Control
1 x Thank You Card
1 x User Guide
Control
Buttons
Power
Indicator
Air Outlet
Base
LED
Display
Handle
Rear
Cover
Power
Cord and
Plug
USING YOUR
HEATER
02
PTC Fan Heater

8 9
Control Panel
Remote Control
Note: For added convenience, the same control buttons
can be found on the remote control.
Power ON/OFF
Temperature+Temperature-
Mute / UnmuteMode / Heat level
TimerOscillation
Operations and Functions
Place the heater on a firm, level surface free from
obstructions, and at least 3ft. (0.9m) away from any wall or
combustible material. Plug into an appropriate voltage AC
120V outlet, the unit will enter standby mode with a beep and
power indicator on red. Your heater is ready for use now.
Press on the heater / remote control once to turn
the heater ON with default settings: Power indicator
on red, default temperature “95°F” & high heat level
“HI” on LED display.
The RED indicator (Power ON indicator) lightens when
the Heater is switched on.
When the unit is on, repeatedly press on the
heater / remote control to cycle through High (HI)
->Low (LO) -> ECO -> High (HI) modes.
Hold the MODEL button for 3 seconds or press
the mute button on the remote control to turn the
buzzer on or off. The HI LO and ECO will flash once
along with a beep sound.
Press once again to turn the heater OFF with
15-second delay and countdown time on the display.
When ECO mode is turned on, the heater will adjust
the working mode (High or Low) automatically based
on the ambient temperature.
Both “ECO” and “HI” / “LO” will light up on the LED
display.
You can also adjust the temperature by pressing
or .
Power ON/OFF
Mode / Heat Level Setting
Mute / Unmute
ECO Mode

8 9
Control Panel
Remote Control
Note: For added convenience, the same control buttons
can be found on the remote control.
Power ON/OFF
Temperature+Temperature-
Mute / UnmuteMode / Heat level
TimerOscillation
Operations and Functions
Place the heater on a firm, level surface free from
obstructions, and at least 3ft. (0.9m) away from any wall or
combustible material. Plug into an appropriate voltage AC
120V outlet, the unit will enter standby mode with a beep and
power indicator on red. Your heater is ready for use now.
Press on the heater / remote control once to turn
the heater ON with default settings: Power indicator
on red, default temperature “95°F” & high heat level
“HI” on LED display.
The RED indicator (Power ON indicator) lightens when
the Heater is switched on.
When the unit is on, repeatedly press on the
heater / remote control to cycle through High (HI)
->Low (LO) -> ECO -> High (HI) modes.
Hold the MODEL button for 3 seconds or press
the mute button on the remote control to turn the
buzzer on or off. The HI LO and ECO will flash once
along with a beep sound.
Press once again to turn the heater OFF with
15-second delay and countdown time on the display.
When ECO mode is turned on, the heater will adjust
the working mode (High or Low) automatically based
on the ambient temperature.
Both “ECO” and “HI” / “LO” will light up on the LED
display.
You can also adjust the temperature by pressing
or .
Power ON/OFF
Mode / Heat Level Setting
Mute / Unmute
ECO Mode

10 11
When the unit is on, press or on the heater
/ remote control to adjust the temperature from 41
to 95°F in 1°F increments.
When the unit is on, press on the heater /
remote control to cycle through 00 -> 01 -> … -> 12
-> 00 -> 01 hour timer.When time is up, the unit will
automatically stop running.
When the unit is on, press on the heater /
remote control to start oscillating.
If no operation is done within 1 minute when
powered on, the display will turn off automatically
（Only the power indicator light + working mode
light should be on).
To turn the display back on, press any button to
wake it up.
To stop oscillating, press it again.
To cancel Timer setting, press and hold on the
heater for 3 seconds, or adjust the timer setting
to 00, or turn the unit off.
When the setting temperature (T0) is reached,
the heater will stop working and enter standby
mode (with 30-second delay). When the room
temperature is lower than the set one (T0), the
heater will start working again.
Temperature Adjustment
Auto OFF Timer
Oscillation Button
Auto LED Display OFF
Memory
Function
The heater is designed with power off memory
function, the heater will always remember
your last settings (temperature & working
mode oscillation status) once you turn it on
again.
24-Hour
Auto Shut
Off
When the heater has been working for
24 hours continuously without any other
operation, it will shut off automatically.
Tip-Over
Protection
When the heater is tipped over, the heater will
shut off automatically with malfunction code
“P4” on LED display and beeps.
Place the heater back on a flat, level and
stable surface.Turn it on again.
Overheat
Protection
When the ambient temperature is above 122°F,
the heater will stop heating and the overheat
alarm will be triggered with malfunction code
“FF” on LED display and beeps.
Please unplug it from the power source
and power it on again when the ambient
temperature drops below 122°F.
Other Features

10 11
When the unit is on, press or on the heater
/ remote control to adjust the temperature from 41
to 95°F in 1°F increments.
When the unit is on, press on the heater /
remote control to cycle through 00 -> 01 -> … -> 12
-> 00 -> 01 hour timer.When time is up, the unit will
automatically stop running.
When the unit is on, press on the heater /
remote control to start oscillating.
If no operation is done within 1 minute when
powered on, the display will turn off automatically
（Only the power indicator light + working mode
light should be on).
To turn the display back on, press any button to
wake it up.
To stop oscillating, press it again.
To cancel Timer setting, press and hold on the
heater for 3 seconds, or adjust the timer setting
to 00, or turn the unit off.
When the setting temperature (T0) is reached,
the heater will stop working and enter standby
mode (with 30-second delay). When the room
temperature is lower than the set one (T0), the
heater will start working again.
Temperature Adjustment
Auto OFF Timer
Oscillation Button
Auto LED Display OFF
Memory
Function
The heater is designed with power off memory
function, the heater will always remember
your last settings (temperature & working
mode oscillation status) once you turn it on
again.
24-Hour
Auto Shut
Off
When the heater has been working for
24 hours continuously without any other
operation, it will shut off automatically.
Tip-Over
Protection
When the heater is tipped over, the heater will
shut off automatically with malfunction code
“P4” on LED display and beeps.
Place the heater back on a flat, level and
stable surface.Turn it on again.
Overheat
Protection
When the ambient temperature is above 122°F,
the heater will stop heating and the overheat
alarm will be triggered with malfunction code
“FF” on LED display and beeps.
Please unplug it from the power source
and power it on again when the ambient
temperature drops below 122°F.
Other Features

12 13
Replacement of Batteries in
Remote Control
Press the locking button
to pop up the battery
holder.
Pushin the holder until
securely locked into
place.
Replace the battery with
the same type (CR2025
3V), making sure the (+)
side facing up.
Chemical Burn and Choking Hazard. Keep batteries away
from children.
The cells shall be disposed of properly, including keeping
them away from children, Even used cells may cause injury.
This product contains a lithium button/coin cell battery. If
a new or used lithium button/coin cell battery is swallowed
or enters the body, it can cause severe internal burns
and can lead to death in as little as 2 hours. Always
completely secure the battery compartment. If the battery
compartment does not close securely, stop using the
product, remove the batteries, and keep it away from
children. If you think batteries might have been swallowed
or placed inside any part of the body, seek immediate
medical attention.
3
12
Caution:
Specifications
Model DR-HSH002
Input 120V~ 60Hz
Rated Power 1500W (High) 900W (Low)
Remote Control
Battery CR2025, 3V

12 13
Replacement of Batteries in
Remote Control
Press the locking button
to pop up the battery
holder.
Pushin the holder until
securely locked into
place.
Replace the battery with
the same type (CR2025
3V), making sure the (+)
side facing up.
Chemical Burn and Choking Hazard. Keep batteries away
from children.
The cells shall be disposed of properly, including keeping
them away from children, Even used cells may cause injury.
This product contains a lithium button/coin cell battery. If
a new or used lithium button/coin cell battery is swallowed
or enters the body, it can cause severe internal burns
and can lead to death in as little as 2 hours. Always
completely secure the battery compartment. If the battery
compartment does not close securely, stop using the
product, remove the batteries, and keep it away from
children. If you think batteries might have been swallowed
or placed inside any part of the body, seek immediate
medical attention.
3
12
Caution:
Specifications
Model DR-HSH002
Input 120V~ 60Hz
Rated Power 1500W (High) 900W (Low)
Remote Control
Battery CR2025, 3V

14 15
Cleaning and Maintenance
It is recommended that the heater be cleaned at least one
time during the operating season and before off-season
storage in order to provide the optimum level of performance.
Turn the heater “OFF”, unplug it and wait for the heater to
cool down.
Use only a soft cloth to gently wipe the outer surfaces of
the heater clean.
Do not use any cleaning agents or detergents.
Never immerse the heater in water and never allow water to
drip into the motor housing. Be sure not to wet the heating
element and the switches.
For storage, you may leave the heater covered to protect
it from dust. Store it in a cool, dry location and arrange the
cable away from traffic areas so that it will not be tripped
over or damaged.
Always disconnect the appliance from the mains by
switching it off and removing the plug from the power
outlet before cleaning.
CLEANING AND
MAINTENANCE
03
PTC Fan Heater
Do not allow water to run into the interior of the heater as
this could result in a fire or electric shock hazard.
Any other servicing should be performed by an authorized
service representative.
Except cleaning, any other servicing should be performed
by an authorized service representative.
Carefully fold the power supply cord and tie it up with a
cord, than put the Heater into the packing box. Keep it in a
cabinet away from any hot or wet location.
Caution:

14 15
Cleaning and Maintenance
It is recommended that the heater be cleaned at least one
time during the operating season and before off-season
storage in order to provide the optimum level of performance.
Turn the heater “OFF”, unplug it and wait for the heater to
cool down.
Use only a soft cloth to gently wipe the outer surfaces of
the heater clean.
Do not use any cleaning agents or detergents.
Never immerse the heater in water and never allow water to
drip into the motor housing. Be sure not to wet the heating
element and the switches.
For storage, you may leave the heater covered to protect
it from dust. Store it in a cool, dry location and arrange the
cable away from traffic areas so that it will not be tripped
over or damaged.
Always disconnect the appliance from the mains by
switching it off and removing the plug from the power
outlet before cleaning.
CLEANING AND
MAINTENANCE
03
PTC Fan Heater
Do not allow water to run into the interior of the heater as
this could result in a fire or electric shock hazard.
Any other servicing should be performed by an authorized
service representative.
Except cleaning, any other servicing should be performed
by an authorized service representative.
Carefully fold the power supply cord and tie it up with a
cord, than put the Heater into the packing box. Keep it in a
cabinet away from any hot or wet location.
Caution:

16 17
Troubleshooting
The following troubleshooting guide addresses the most
common problems. If problems persist, contact the Customer
Support at [email protected].
Problem Possible Causes Solution
Malfunction
Codes on LED
Display
E2 - Temperature
sensor short circuit
Unplug it from the
power source and
contact Customer
Support.
E1 - Temperature
sensor open circuit
Unplug it from the
power source and
contact Customer
Support.
FF - Overheat
Protection (Ambient
temperature above
122°F)
Unplug it from the
power source and
power it on again
when the ambient
temperature drops
below 122°F.
P4 - Tip-Over
Protection
Place the heater back
on a flat, level and
stable surface.
Heater does not
start
Power cord is not
properly plugged in.
Connect the plug to
a powered elec-trical
outlet.
TROUBLESHOOTING
04
PTC Fan Heater

16 17
Troubleshooting
The following troubleshooting guide addresses the most
common problems. If problems persist, contact the Customer
Support at [email protected].
Problem Possible Causes Solution
Malfunction
Codes on LED
Display
E2 - Temperature
sensor short circuit
Unplug it from the
power source and
contact Customer
Support.
E1 - Temperature
sensor open circuit
Unplug it from the
power source and
contact Customer
Support.
FF - Overheat
Protection (Ambient
temperature above
122°F)
Unplug it from the
power source and
power it on again
when the ambient
temperature drops
below 122°F.
P4 - Tip-Over
Protection
Place the heater back
on a flat, level and
stable surface.
Heater does not
start
Power cord is not
properly plugged in.
Connect the plug to
a powered elec-trical
outlet.
TROUBLESHOOTING
04
PTC Fan Heater

18 19
Heater does not
start
Overheat
Protection has
been activated.
Turn the heater OFF,
unplug it and allow it
to cool.
Check and remove
any objects on or
adjacent to the
heater.
Wait 5-10 minutes
before plugging the
unit back in.
No power is passing
through the unit.
Ensure that your
circuit breaker or fuse
is working properly.
Ensure your heater is
placed on a flat and
even surface.
Setting
temperature is
lower than the room
temperature.
Make sure the
thermostat is set at
a higher temperature
than the room
temperature
The heater
suddenly stops
during heating
The temperature
exceeds the
threshold of the
thermal cut- off.
Turn off the unit and
unplug it from the
power outlet. Allow it
to cool, and then plug
it into the electrical
outlet again.
The heater is tipped
over.
Place it on a flat, level
and stable surface.
WARRANTY AND
SERVICE
05
PTC Fan Heater