Drive DeVilbiss Healthcare Able Assist PT003 User manual

www.drivedevilbiss.co.uk
The Team at Drive DeVilbiss develops its
productstogiveourcustomersthefreedom to
liveindependently.Thisencompassestheir
daily home life and provides them with the
opportunityto enjoyan outing with familyand
friends. Our goal is to develop a range that
willprovideindividualswithachance
toenjoyeverydaylife.
Drive DeVilbiss Healthcare Ltd,
Heathfield Lane, Birkenshaw,
West Yorkshire, HX59JP
Tel:[phone]
Email:[e-mail]
www.drivedevilbiss.co.uk
AbleAssistTransferAids
User Manual
Dealer Stamp

Able Assist User Manual (Ref: PT004_IFU Issued 01/17)
Introduction
The Able Assist User Transfer Aid provides a
safe and easy solution for a Carer wishing to
transfer a Client. This Transfer Aid is very
manoeuvrable and light to use. A standard
version is available PT003, an adjustable leg
version PT004 and a folding version PT005.
Features & Benefits
The Able Assist User Transfer Aid enables Users
to participate in transfers, and therefore
improving muscle tone. This product is ideal for
transferring Users from room to room and hence,
increasing the User’s independence.
For those Users who can raise from a seated
position to a standing position, the Able Assist
Transfer Aid is ideal. The Carer will rotate the
seat parts and the User then stands on the
footplate provided. The Carer will then lower the
seat flaps and the User can now sit back, have
their legs supported by the knee brace and hold
on to the horizontal bar in front of them, making
them feel secure.
The 4 wheels, (2 of which are braked) enable this
aid to be manoeuvred easily from room to room.
The narrow width of this Aid enables the Carer to
manoeuvre easily through standard doorways.
The Transfer Aid can be wheeled directly up to a
toilet, with wheels positioned either side of the
W/C, offering the User more dignity. To sit down,
the above process is reversed.
Note: Model PT004 Able Assist User Transfer
Aid has adjustable width legs, enabling the Aid to
be positioned around wider riser recliner
armchairs. Model PT005 can be folded and
stored away when not in use.
Safety Precautions
Always wear appropriate footwear when
operating the Able Assist.
The User should not be left unattended
whilst occupying the Able Assist.
The User should not lean out of the Able
Assist’s footprint.
Do not exceed the weight capacity of 185kg
The castor brakes should always be applied
except when the User is being propelled in
the Able Assist.
The Able Assist may not be suitable for all
Users. A risk assessment should be carried
out prior to use. The User must be able to
bear weight.
Not all accessories are suitable for the Able
Assist and/or the user. A risk assessment
should be done prior to use.
If used with a wheelchair, then the
wheelchair brakes should be applied and the
legrests removed prior to operation.
Do not tilt or lever the device during use. All
4 castor wheels should be in contact with the
ground at all times.
The unit is designed for indoor use and
should only be used on a level surface.

Able Assist User Manual (Ref: PT004_IFU Issued 01/17)
Parts Description
Seat Pad
Knee Pad
Hand Rail
Push
Handle Push
Handle
Footplate
Castor
Wheel
Sling
Attach-
ment
Sling
Attach-
ment
Model Identification
PT003 (Able Assist with Rigid Legs)
PT004 (Able Assist with Adjustable Legs)
PT005 (Able Assist with Folding Facility)

Able Assist User Manual (Ref: PT004_IFU Issued 01/17)
General Operation –
Transferring to the Able Assist
1. Position the Able Assist close to the User
requiring transport.
2. Spread the legs on the Able Assist to give
greater stability. Do this by pushing down on
the pedal below.
Note: this stage applies to the PT004 only.
The PT003 and PT005 have fixed width legs.
3. Apply the brakes on the rear castors, by
pressing down on the locking tab.
4. Flip up the Seat Pads so the User can occupy
the Able Assist.
5. The User’s feet should be positioned on the
footplate. The User should then grap the hand
rail. Using the assistance from the handrail,
the User should now be able to stand and
push the front of their lower legs against the
knee pad.
6. Once the User is fully stood, the Seat Pads
should be lowered so that the User can perch
on them. Once the User is secure, release the
castor brakes by pushing up on the locking
tab. The carer can then move the Able Assist
using the push handles as shown below.

Able Assist User Manual (Ref: PT004_IFU Issued 01/17)
General Operation –
Transferring From the Able Assist
1. Position the Able Assist close to the seat or
bed.
2. Spread the legs on the Able Assist to give
greater stability. Do this by pushing down on
the pedal below.
Note: this stage applies to the PT004 only.
The PT003 and PT005 have fixed width legs.
3. Apply the brakes on the rear castors, by
pressing down on the locking tab.
4. Ask the User to stand up using the Hand Rail
as assistance. Lift up the Seat Pads.
5. The User can now slowly lower
themselves in to the seat using the Hand
Rail for assistance. The carer should hold
the Able Assist with by the push handles
during this operation.
6. The User should now remove their feet
from the footplate and the carer can
remove the Castor Brakes. The Able
Assist can now be wheeled away for
storage.

Able Assist User Manual (Ref: PT004_IFU Issued 01/17)
Using the Able Assist with a Bed
The Able Assist can be used to aid a User getting
out of bed.
1. Position the User as shown below so they
are facing the Able Assist and sat on the bed
with their feet on the floor.
2. Spread the legs if required and get the User
to place their feet on the footplate.
Flip up the Seat Pads and apply the Castor
Brakes.
3. The User should grab the Hand Rail with
both hands and use this to assist them
with standing as shown below:
4. Once the User is fully stood up, the carer
should flip down the Seat Pads and user
can then perch on the pads.
5. The carer can then remove the brakes
and propel the Able Assist including the
User to their destination.
Also refer to the sections on
General Operation for detailed
operating instructions.

Able Assist User Manual (Ref: PT004_IFU Issued 01/17)
Using the Able Assist with a Chair
The Able Assist can be used to aid a User getting
out of a chair, commode, toilet or wheelchair. If
used with a wheelchair, then the wheelchair
brakes should be applied and the legrests
removed prior to operation.
1. Position the User as shown below so they
are facing the Able Assist with their feet on
the floor.
2. Spread the legs if required and get the User
to place their feet on the footplate.
Flip up the Seat Pads and apply the Castor
Brakes.
3. The User should grab the Hand Rail with
both hands and use this to assist them
with standing as shown below:
4. Once the User is fully stood up, the carer
should flip down the Seat Pads and user
can then perch on the pads.
5. The carer can then remove the brakes
and propel the Able Assist including the
User to their destination.
Also refer to the sections on
General Operation for detailed
operating instructions.

Able Assist User Manual (Ref: PT004_IFU Issued 01/17)
Sling Attachment
Sling and transfer belt attachments are provided
for Users who require extra support.
Such compatible accessories can be attached by
using the slotted bracket on the accessory as
shown below:
Note: Not all accessories are suitable for the Able
Assist and/or the user. A risk assessment should
be done prior to use. Drive DeVilbiss accepts no
liability for damage or injury as a result of third-
party accessories being used.
Knee Pad Adjustment (PT004 Only)
The Knee Pad on the PT004 can be adjusted for
height and angle.
To adjust the angle, loosen the two dome head
nuts with a spanner on both sides of the frame
(as shown below). Reposition the Knee Pad to
the required angle and then retighten the nuts
using the spanner.
To adjust the height of the Knee Pad, loosen the
four screws with an allen key (as shown below).
Reposition the Knee Pad to the required height
then retighten using the allen key.

Able Assist User Manual (Ref: PT004_IFU Issued 01/17)
Folding the Able Assist (PT005)
The PT005 comes with a folding facility to allow
for compact to storage.
To unfold the Able Assist:
1. Undo the Velcro strap holding the frame
together. Ensure that the Castor Brakes are
not applied.
2. Fold out the frame, and push down on the
centre of the footplate with your foot if
required.
3. Lift up the grab handle and secure by
inserting the locking pin.
To fold the Able Assist:
1. Pull out the locking pin and fold down
the Hand Rail.
2. Fold up the frame. Lift up the centre of
the footplate if required, being careful
to avoid any pitch points.
3. Secure the frame in storage by
wrapping around the Velcro strap.

Able Assist User Manual (Ref: PT004_IFU Issued 01/17)
Specifications
Specification
PT003
PT004
PT005
Overall Length
86cm
82cm
78cm
Overall Height
97cm
106cm
97.5cm
Overall Width
61cm
53cm
61cm (open)
37cm (folded)
Knee Pad Measurements
39cm (w) x 26cm (h)
39cm (w) x 26cm (h)
36cm (w) x 25cm (h)
Knee Pad Height from Base
Plate
17-41cm
25-49cm
19-43cm
Handle Height (from base)
85cm
90cm
87cm
Seat Height (from floor)
62cm (bottom)
67cm (top)
62cm (bottom)
67cm (top)
59cm (bottom)
77cm (top)
Chassis Length
75cm
87cm
79cm
Chassis Width (front)
46cm
52cm
46cm
Chassis Width (back)
61cm
50cm
61cm
Chassis Width (internal)
35cm
49-76cm
34.5cm
Plain Castors (front)
7.5cm
7.5cm
7.5cm
Brake Castors (back)
7.5cm
7.5cm
7.5cm
Maximum User Weight Limit
185 Kg
185 Kg
185 Kg

Able Assist User Manual (Ref: PT004_IFU Issued 01/17)
Servicing and Maintenance
Cleaning:
It is recommended that the Able Assist is cleaned
daily as a minimum.
The device is cleaned down with a damp cloth
using mild detergent and/or disinfectant. For
example, a mild chloride disinfectant (solution of
10,000 parts per million) can be used. Excess
water is then removed from the device using a
towel or a compressed air tool. The device is
then placed in a suitable environment to fully dry.
Please note that the polyurethane blue seat
pads should not be cleaned with a chlorine
solution.
Caution: If a hot air dyer is used to dry the
equipment, the temperature must not exceed
80◦C (176◦F). Do not use petroleum based
solvents or similar, since this may damage plastic
parts.
The device is not suitable for cleaning in an
autoclave.
Servicing:
It is recommended that the device is inspected
annually by a competent person.
The Able Assist transfer aids are designed for
minimal maintenance.
Weekly Checks:
The following weekly checks are recommended:
Check the brakes and the secure fixing
and manoeuvrability of the castors.
Check that the transfer aid is stable,
i.e. all four castors are touching the
floor.
The Seat and Knee Pads are
secure and not loose or damaged.
The Castor Wheels rotate and swivel
freely.
Check that all fasteners are secure and
not corroded or damaged
PT004 Only: Check that the leg
adjustment mechanism operates
smoothly and is not loose.
PT005 Only: Check that folding
mechanism operates smoothly and is not
loose.
If any of the checks highlight a problem with the
device, do not until the problem has been
addressed.
Warranty
The Able Assist comes with a one year
manufacturer’s warranty to cover design and
manufacturing defects.
This does not include accidental damage,
damage as the result of misuse and/or wear and
tear.
Please contact Drive DeVilbiss for full warranty
conditions.
This does not affect your statutory rights.