Dura Trel Compost Bin Deluxe User manual

#11134 COMPOST BIN Deluxe
ASSEMBLY INSTRUCTIONS
TOOLS NEEDED:
Drill with #2 Phillips Bit (recommended) or
Phillips Screwdriver
Super or Crazy Glue
BACK PANEL ASSEMBLY
(Refer to Left Side of Drawing 1)
Lay both back posts on a flat surface with screw pilot holes facing upwards and routed holes for rails facing
inwards. Slide the 35 ¾” back rails completely into routed slots in both posts. Fasten with 1 ¼" screws and
snap screw caps over screw heads.
FRONT PANEL ASSEMBLY
(Refer to Right Side of Drawing 1)
Lay both front posts on flat surface with straight routed holes for front rails facing inward. Slide the 35 ¾”
front braces completely into the top and bottom routed holes of both posts. Fasten with 1 ¼" screws, snap
screw caps over screw heads.
COMPOST BIN ASSEMBLY
(Refer to Drawing 2)
With back panel laying flat with routed openings facing up; slide the angled side rails completely into both
back posts. Fasten with 1 ¼" screws, snap caps over screw heads. Next slide front panel onto side
rails making sure there is enough gap inside front posts to easily slide removable front rails
in and out. Fasten side rails to front posts. Apply glue to inside edges of 4 x 4" post caps and place on top
of posts.
Insert Front Removable Rails by sliding into one post completely then slide into other post, adjust so Handle
cutouts line up evenly down center.
If you encounter missing or defective parts, please contact manufacturer direct at toll free #
below.
Dura-Trel, Inc. ~ PO Box 122, Sheboygan Falls, WI 53085 ~ Toll Free 877-258-6020

Dura-Trel, Inc. – PO Box 122, Sheboygan Falls, WI 53085 – Toll Free 877-258-6020
PACKING LIST
PARTS CONTAINED:
QTY. PART NO. PART DESCRIPTION
1 40404-36000L 4 x 4 x 36” LEFT FRONT POST
1 40404-36000R 4 x 4 x 36” RIGHT FRONT POST
2 40404-36001 4 x 4 x 36” BACK POST
5 41555-31500 1½ x 5½ x 31½" FRONT RAIL (w/handle cutout)
10 51555-32000 1½ x 5½ x 32” ANGLED SIDE RAIL
5 51555-35750 1½ x 5½ x 35¾" BACK RAIL
2 57815-35750
⅞x 1 ½ x 35 ¾" FRONT BRACE
4 7CAPS-0404F 4 x 4” FLAT POST CAP
Hardware Bag Includes:
34 7HDWR-K8125 1¼" KAPPET SCREW
34 77HDWR-K8000 KAPPET SCREW CAPS
1 COMPOST BIN INSTRUCTION
NOTE: Some parts may be packed inside of others.
If you encounter missing or defective parts, please contact manufacturer direct at toll free # below.
#11134 compost bin Deluxe