DXV FITZGERALD Console User manual

- 1 -
INSTALLATION INSTRUCTIONS
SAVE FOR FUTURE USE
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2016 770155-100 Rev. E (8/17)
RECOMMENDED TOOLS AND MATERIALS
Most of the procedures require the use of common tools and materials,
which are available from hardware and plumbing supply stores. It is
essential that the tools and materials be on hand before work is begun.
ROUGHING-IN DIMENSIONS: FITZGERALD CONSOLE with FITZGERALD LAVATORY D20015
• For reference
Thank you for selecting DXV. To ensure this product is installed properly, please read these instructions carefully before you begin.
(Certain installations may require professional help.) Also be sure your installation conforms to local codes.
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: Pictures may not exactly define contour of china and components.
!
Fitzgerald®Console
Model: D21410
Oak Hill™Console
Models: D21411030-30"Console Assembly
D21411024-24"Console Assembly
8"
(203 mm)
28"
(711 mm)
20-1/8"
(511 mm)
7-7/8"
(200 mm)
3"
(75 mm)
12-5/16"
(313 mm)
22"
(559 mm)
6-1/8"
(155 mm)
FINISHED
WALL
NOTE: Locate supplies and “P” trap in open area.
8"
(203 mm)
9"
(228 mm)
FINISHED
FLOOR
35-1/4"
(895 mm)
24-5/8"
(626 mm)
25"
(634 mm)
7-1/2"
(190 mm)
4"
(100 mm)
20"
(508 mm)
32"
(815 mm)
18"
(457 mm)
22"
(559 mm)
35-1/4"
(895 mm)
25"
(634 mm)
Adjustable Wrench
Regular Screwdriver
Phillips Screwdriver
10'
Putty Knife
Drill
Saber Saw
Plumbers' Putty or
Caulking
Tape Measure
Level
Basin Wrench
Channel LockPipe Wrench
Hacksaw
Tubing Cutter

- 2 -
EXPLODED VIEW - FITZGERALD CONSOLE
770155-100 Rev. E (8/17)
1
2
4
6B
6H
6D
6G
3
5
6C
6A
6E
ITEM # DESCRIPTION PART NUMBER
1Stabilizing Frame
2 Vertical Support Tube
3 Horizontal Support Tube
4 Vertical Support Tube
5 Horizontal Support Tube
6A (1) - Ball Joint 770144-201.YYY0A
6B (1) - Ball Joint Connector 770145-201.YYY0A
6C (1) - Foot Ferrules 770146-201.YYY0A
6 Hardware/Mounting Kit
6D (2) - Wall Escutcheons
6E (2) - Wall Bracket Attachment
6G (8) - Screws
(head Ø 7.4mm x 32.8mm, phillips at head)
6H (8) - Wall Anchors
770226-201.YYY0A
ROUGHING-IN DIMENSIONS:
• For reference
OAK HILL CONSOLE WITH 30"OAK HILL LAVATORY D20160008
OAK HILL CONSOLE WITH 24"OAK HILL LAVATORY D201610008
FINISHED
FLOOR
26-15/16"
(684 mm)
5-1/16"
(128 mm) 6-15/16"
(176 mm)
30"
(761 mm) FINISHED
FLOOR
FINISHED
WALL
20-1/2"
(520 mm)
28-1/4" (718 mm)
35" (889 mm) 30" (761 mm)
30-5/8" (778 mm) 33-5/8" (854 mm)
22"
(559 mm)
23-9/16"
(599 mm)
13"
(330 mm)
18"
(458 mm)
FINISHED
FLOOR
20-15/16"
(531 mm)
5-1/16"
(128 mm) 6-15/16"
(176 mm)
24"
(609 mm)
14-15/16"
(362 mm)
13"
(330 mm)
FINISHED
FLOOR
FINISHED
WALL
20-1/2"
(520 mm)
28-1/4" (718 mm)
35" (889 mm) 30" (761 mm)
30-5/8" (778 mm) 33-5/8" (854 mm)
23-9/16"
(599 mm)
22"
(558 mm)

- 3 -
EXPLODED VIEW - OAK HILL CONSOLE
770155-100 Rev. E (8/17)
1
2
4
6B
6F
6H
6D
6G
3
5
6C
6A
6E
ITEM # DESCRIPTION PART NUMBER
1Stabilizing Frame
2 Vertical Support Tube
3 Horizontal Support Tube
4 Vertical Support Tube
5 Horizontal Support Tube
6A (1) - Ball Joint 770144-201.YYY0A
6B (1) - Ball Joint Connector 770145-201.YYY0A
6C (1) - Foot Ferrules 770146-201.YYY0A
6 Hardware/Mounting Kit
6D (2) - Wall Escutcheons
6E (2) - Screws (Ø 5.5mm x 50mm)
6F (2) - Washers (OD - Ø 16mm, ID - Ø 6mm)
6G (6) - Screws (head Ø 7.4mm x 32.8mm)
6H (6) - Wall Anchors
770226-202.YYY0A
ROUGHING-IN DIMENSIONS:
• For reference
OAK HILL CONSOLE WITH 30"OAK HILL HIGH BACK LAVATORY D20155002
FINISHED
FLOOR
26-15/16"
(684 mm)
8"
(203 mm)
18"
(457 mm)
6"
(152 mm)
11"
(280 mm)
4"
(102 mm)
13"
(330 mm)
22"
(559 mm)
4-7/8"
(124 mm)
23-1/2"
(597 mm)
26"
(662 mm)
15-3/4"
(400 mm)
30"
(762 mm)
FINISHED
FLOOR
FINISHED
WALL
20-1/2"
(520 mm)
30" (763 mm)
36" (915 mm)
38-3/4" (985 mm) 30-5/8" (778 mm)
39-3/16" (995 mm)
41-1/16" (1043 mm)
31-1/8" (791 mm)
23-9/16"
(599 mm)

- 4 -
1
2
4a
3
4b 5
CONSOLE STAND INSTALLATION
FOR FITZGERALD CONSOLE FOR OAK HILL CONSOLE
Suitable reinforcement is required for anchoring the
lavatory to the wall. Determine horizontal centerline
location “*” of lavatory mounting holes. (see Figure 1).
Rough in supply lines and waste per rough in dimensions.
* For Oak Hill Console: It must have cross support for
fastening the stablizing frame.
Refer to exploded view. Set aside items
6E through 6H. Assemble console
stand using items 1 through 5 and 6A
through 6D.
Level stabilizing frame item 1. Mark
position of brackets (item 6E). Attach
brackets to wall using items 6G & 6H.
Note: Remove & re-install stabilizing
frame (item 1) if necessary.
Move the metal stand into place.
Attach center rails of console to wall
using items 6G thru 6H. The glides can
be adjusted, but it is recommended not
to exceed 1/2"if possible.
Level stabilizing frame item 1. Using
item 6E (screw) and 6F (washer) to
fasten the frame to the wall.
Note: Remove & re-install stabilizing
frame (item 1) if necessary.
Continue with installation
for appropriate sink and
faucet options chosen.
NOTCH STUDS
OR TOE-NAIL
C/L OF 2 x 6
REINFORCEMENT
DRAIN PIPE
FIGURE 1
WATER
SUPPLY
PIPES
LAVATORY
CROSS-PIECE
SUPPORT
INSTALLING
CROSS-PIECE
*FOR OAK HILL
CONSOLE
STABILIZING
FRAME
FINISHED FLOOR
In the United States:
DXV
One Centennial Avenue
Piscataway, New Jersey 08855
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: [phone]
www.DXV.com
In Canada:
DXV
5900 Avebury Road
Mississauga, Ontario
L5R 3M3
Canada
Toll Free: 1-800-387-0369
Local: 905-306-1093
Fax: [phone]
www.DXV.ca
In Mexico:
DXV
Via Morelos 330
Col. Santa Clara Coatitla
Ecatepec, Estado de México 55540
Toll Free: 01-800-8391200
www.DXV.mx