DXV Keefe D35104.430 User manual

- 1 -
Keefe™Handle Trim Kit for Two Way or
Three Way In-Wall Diverter
Model D35104.430
FINISHED
WALL
2-3/8"
(59.3mm)
3/8"
(9.8mm)
2-15/16"
(75mm)
2-3/4"
(69.8mm)
In the United States:
DXV by American Standard
One Centennial Avenue
Piscataway, New Jersey 08855
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: [phone]
www.DXV.com
In Canada:
DXV by American Standard
5900 Avebury Road
Mississauga, Ontario
L5R 3M3
Canada
Toll Free: 1-800-387-0369
Local: 905-306-1093
Fax: [phone]
www.DXV.ca
In Mexico:
DXV by American Standard
Via Morelos 330
Col. Santa Clara Coatitla
Ecatepec, Estado de México 55540
Toll Free: 01-800-8391200
www.DXV.mx
SAVE FOR FUTURE USE
M965518 Rev. 1.1
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2013
ROUGHING-IN DIMENSIONS:
• For reference
Plumbers' Putty or Caulking
Phillips Screwdriver
Regular ScrewdriverChannel Locks
Thank you for selecting DXV by American Standard.
To ensure that your installation proceeds smoothly,
please read these instructions carefully
before you begin.
INSTALLATION INSTRUCTIONS
RECOMMENDED TOOLS AND MATERIALS
Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing,
supply stores. It is essential that the tools and materials be on hand before work is begun.

- 2 -
CAUTION Turn off hot and cold water supplies before beginning.
M965518 Rev. 1.1
1INSTALL VALVE TRIM
TWO-WAY OR THREE-WAYE DIVERTER VALVE
• Twist and pull off PLASTER GUARD (1). (TWO AND THREE WAY VALVES) Install ESCUTCHEON (4) onto ESCUTCHEON
HOLDER (2). Fig. A.
• Installation complete. Test Valve. Fig. D.
• Thread ESCUTCHEON HOLDER (2) with ESCUTCHEON (4) onto DIVERTER VALVE (3) until ESCUTCHEON (4) is ush
against nished wall. Fig. B.
• Turn VALVE STEM (5) clockwise to the off position. Align LEVER HANDLE ASSEMBLY (6) as shown or as desired and
install HANDLE ASSEMBLY(6) onto VALVE STEM (5). Thread HANDLE BASE (7) clockwise onto HANDLE ADAPTER (2)
until seated tightly against stop. Fig. C.
Fig. A.
Fig. C. Fig. D.
Fig. B.
3
2
13
4
57
6
4
2
2
FINISHED WALL

- 3 - M965518 Rev. 1.1
Handle Trim Kit for Two Way or
Three Way In-Wall Diverter
D35104.430
Keefe
MODEL NUMBER
M964564-YYY0A
LEVER HANDLE
100
144
Replace the "YYY" with
appropriate finish code
POLISHED CHROME
BRUSHED NICKEL
H960835.XXX
EXTENSION
M964562-YYY0A
ESCUTCHEON KIT
H2749.191
EXTENSION KIT