Dynojet Power Commander III USB EX User manual

i106-411EX 2000-2001 Honda VFR800 - PCIII USB EX - 1
2000-2001 HONDA
VFR800
I NSTALLATION I NSTRUCTIONS
Dynojet Research • 2191 Mendenhall Drive • North Las Vegas, NV 89081 • [phone]
DOWNLOAD THE POWER COMMANDER SOFTWARE AND LATEST MAPS FROM OUR WEBSITE:
WWW.POWERCOMMANDER.COM
P LEASE R EAD A LL D IRECTIONS B EFORE S TARTING I NSTALLATION
P ARTS L IST
quantity description
1 power commander EX
1 USB cable
1cd-rom
1 installation guide
1 power adapter
2 power commander decal
2 dynojet decal
2 velcro strip
1 alcohol swab USB port
expansion port

i106-411EX
2000-2001 Honda VFR800 - PCIII USB EX - 2
The ignition must be turned OFF before
installation.
1 Remove the seat.
2 Remove the front two fuel tank mounting
bolts.
3 Prop the front of the fuel tank up.
4 Remove the left hand mid fairing.
5 Unplug the connector as shown in Figure A.
6 Route the PCIII USB EX harness from the
inside of the frame and come out in between
the mounts for the left hand radiator as shown
in Figure B.
7 Attach the connectors from the PCIII USB EX to
the stock connector as shown in Figure C.
Figure AFigure BFigure C
unplug this connector
PCIII USB EX
harness
stock connectors
PCIII USB EX
connectors

i106-411EX
2000-2001 Honda VFR800 - PCIII USB EX - 3
8 Lift the cover over the battery to access the
terminals.
9 Attach the ground wire from the PCIII USB EX
to the negative side of the battery as shown in
Figure D.
10 Reinstall the battery cover.
11 Using the supplied velcro, attach the
PCIII USB EX to the inner fender behind the
battery box as shown in Figure E. Make sure to
clean both surfaces with the alcohol swab
before attaching.
12 Reinstall the fuel tank and the seat.
13 Insert the cd provided into your computer’s
cd-rom drive.
14 Follow the on-screen instructions to install the
PCIII USB EX software.
Visit www.powercommander.com to download
software tutorials and the latest maps.
Figure DFigure E
PCIII USB EX
harness
ground wire