Approved for the
food industry
HACCP International has
certified the Dyson Airblade™
hand dryer (AB02) suitable
for use in the food industry.
It’s the only hand dryer to
achieve this accreditation.
Traditionally hand dryers
have not been used in food
preparation environments.
They leave staff with damp
hands because they’re
too slow, they blow dirty
washroom air onto clean
hands and their surfaces
can harbor bacteria.
The Dyson Airblade™ hand
dryer has a 12 second
dry-time, HEPA filter and
anti-microbial coating.
The Hazard Analysis Critical Control Point
is an internationally recommended system
of food safety management.
“ The technology addresses a number
of unacceptable risks posed by hand
dryers in the past. It’s easy to clean
and is a touch-free system. It also has
a fast dry cycle. With the inclusion of
a HEPA filter, these features combine
to reduce considerably the risk of
microbiological contamination and
thereby meet HACCP International’s
food safety criteria.“
Clive Withinshaw
Director, HACCP International
The only hand dryer approved
for food environments by HACCP
Every single component
Materials and manufacture
represent 7% of total emissions.
The Dyson Airblade™ hand
dryer has 275 components
and even the smallest one
was assessed.
Waterways vs. highways
Transportation represents less
than 1% of total Dyson Airblade™
hand dryer emissions. Most of it
is by energy-efficient ships. It’s
far lower than paper towels,
which continually rely on road
transport for re-stocking.
Less energy = less carbon
Fast dry time and no energy
hungry heating element mean
the Dyson Airblade™ hand dryer
uses up to 80% less energy than
warm air dryers.
Hand me down
The Dyson Airblade™ hand
dryer is guaranteed for 5 years.
But when it does eventually
stop, many component parts
are recyclable and the impact
of doing so is a negligible part
of its carbon footprint.
No stone left unturned
Everything we make or use has
a carbon footprint. It represents
the total amount of carbon dioxide
and other greenhouse gases
generated during its life.
Working with the Carbon Trust,
Dyson has measured the carbon
footprint of the Dyson Airblade™
hand dryer. The calculation
covers: materials, manufacture,
transportation, use and end-of-
life disposal.
Only one hand dryer has the
Carbon Reduction Label