Eagle Group A201604 User manual

#1
#2
#3
#4
#5
#6 #7
#8
#9
ASSEMBLY INSTRUCTIONS
Inhalation Therapy Cart
PART #A201604
EG9821 Revised 01/07
(continued on Page 2)
#qty part # description
#1 2 B200054 “U” handles/legs
#2 2 B201032 cylinder rack matt
#3 2 B201389 cylinder rack truss frame
#4 1 B200692 wire shelf
#5 4 A200019 donut bumpers
#qty part # description
#6 4 A201162 casters
#7 4 A201163 casters with brake
#8 12 A200022 pairs of aluminum split sleeves
#9 12 A200021 retaining rings
CAUTION
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
SAVEYOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Parts List
Before assembly, please note:
• Do NOT install casters before installing shelves.
• “U” handles’ legs must be straight and parallel for easy assembly. If they have been bent in shipping and handling, straighten them now.
• When installing racks and shelves, make sure the thicker part of the collars goes toward the bottom.
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2007 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: [phone]

“U” handles/legs
bottom cylinder rack
truss frame
bottom shelf
bottom cylinder
truss frame
ASSEMBLY INSTRUCTIONS
Inhalation Therapy Cart
“U” handle
“U” handle
cylinder
rack
truss
frame
(continued on Page 3)
2
split
sleeve
truss
frame
“U” handle
split
sleeve
wire
shelf
“U” handle
Step 1 - Attach top cylinder rack truss frame to “U” handles/legs.
• Snap aluminum split sleeves onto bottom groove
of “U” handles/legs.
• Slide wire shelf down onto split sleeves.
Step 3 - Attach wire shelf to “U” handles/legs.
Step 2 - Slide bottom cylinder rack truss frame
and wire shelf up “U” handles/legs.
IMPORTANT: Slide bottom cylinder rack truss frame first,
then slide wire shelf toward top of handles.
• Slide cylinder rack truss frame toward top of the handles.
• Attach aluminum split sleeves to top groove of “U” handles/legs.
• Slide cylinder rack truss frame down onto split sleeves.
split
sleeve

ASSEMBLY INSTRUCTIONS
Inhalation Therapy Cart
(continued on back page)
3
bottom
cylinder rack
truss frame
split
sleeve
truss
frame
“U” handle
Step 4 - Attach bottom cylinder rack truss frame to “U” handles/legs.
Step 5 - Secure shelving.
Secure by placing a
board across all corners
and tapping with a
hammer. Do NOT
hammer directly on
shelf/matt.
Gently tap
retaining rings
into top groove
on split sleeves.
“U” handles/legs
• Snap aluminum split sleeves onto 4th groove of “U” handles/legs.
• Slide cylinder rack truss frame down onto split sleeves.

ASSEMBLY INSTRUCTIONS
Inhalation Therapy Cart
(End)
truss frames
cylinder
rack
matt
cylinder rack
truss frame
Step 7 - Snap cylinder rack matt to each truss frame.
“U” handles/legs
caster
stem
donut
bumper
caster
stem
donut
bumper
• Place donut bumpers onto ends of “U” handles/legs.
• Place caster stems into bottom of “U” handles/legs and drive caster using a
hammer or mallet (several solid blows are usually required).
Step 6 - Secure casters to unit.
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2007 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: [phone]