EBECO EB-Therm 350 Instruction manual

LED
Select button [ ]
Day
Time
Temp
Selected control
Arrow buttons [ ]
Getting started Using the menu
Exit the menu*
4 secs
Turning o and on Locking the keypad
4 secs
Navigate
To standby* Out of standby
Quick guide to EB-Therm 350
Get started quickly and easily! Here you have a guide to the most important functions and
settings, an introduction to the energy saving programs and an overview of the menu
system.
Always read the full manual for complete product information. The quick guide in more languages?
Visit ebeco.com!
Start the
menu Navigate through
the options
*The heat is not being regulated. The clock is running
and the programming is saved in the memory.
This is what the display looks like when you
rst start EB-Therm.
Lock Unlock
*Or wait 30 secs and exit automatically.
4 secs
ebeco.com

More on temperature The EB-Therm 350 can regulate the temperature in three dierent ways, oor
thermostat, room thermostat or room and oor thermostat. This enables the comfort temperature
and any ooring temperature requirements to be combined. If the oor sensor is connected when the
thermostat is turned on for the rst time, oor thermostat is selected automatically. Room thermostat
cannot be selected when the oor sensor is connected. Room and oor thermostat should be used in
rooms with wooden ooring and in rooms with large windows that are exposed to solar insolation.
Read more about the control functions and how you set them in the manual. You can always see the
current temperature by following the above description.
To be able to use all the functions you need to set the time and date rst.
Show actual temperature
Time and date
Navigate to the correct time*
*Repeat the last two steps to set minutes, day, month and
year. The correct day of the week is set automatically.
Desired temperature
Basic settings
Lock buttons rst Temp in the oor
* If the control function is set on Floor thermostat,
otherwise temperature in the room (R).

Tailor the heating to your own needs! You have the option of programming time and tempera-
ture for four events every day: wakeup out home and night . An example:
The family wakes up nice and warm at 07:30. Wakeup is programmed: 23°C at 07:30.
They leave home and the heating can be turned down. Out is programmed: 17°C at 09:30.
The family return at 17:00 to a warm home. Home is programmed: 21.5°C at 17:00.
A cool climate is better at night for both the environment and your sleep. Night is programmed:
18°C at 22.30.
Energy saving programs
Start/stop program Conrm when
the correct icon
is ashing* Arrow & icon show that
a program is running
*Stop program: Conrm when no icon is ashing.
Save energy cleverly and easily! With these programs the heating is adapted to your actual needs
and the heat is turned down when it isn’t needed. There are four program options:
Preset for oce
environments
Frost protection for premises which
stand empty for long periods
Preset for home
environments
Program your own
personal settings
Program personal settings
Choose between a whole
week or a single day.
Navigate to the time & temp for
the event. Conrm and repeat.
Don’t forget to start the program afterwards!

Sitemap of the menu
This is how the menu in EB-Therm 350 is structured. Here you can quickly see where all the
functions and settings are.
CONT
Set the display’s contrast
1-8
PROG
Start/stop program
UTIL
Show connected time in %
24 HR
7 D
30 D
365 D
Home program
Oce program
Personal program
Frost protection program
SET
Various settings
CLK
Set time and date.
S
Turn o and set to automatic
change to DST
RNF
Set how the temperature
is to be regulated. F (oor
thermostat) - R(room
thermostat) - R&F.
OH
Set the temperature to
restrict the oor sensor
forR&F.
FP
Turn o and turn on the frost
protection program.
4E
Set the personal program, time
and temperature for up to four
events per day.
DISP
Set how the time will be
shown, 24- or 12-hour format.
LED
Set the strength of the
display’s backlight.
AF
Turn o and turn on the
adaptive function.
END
Exit the menu and return to
basic mode.
LOCK
Locks the keypad
END
Exits the menu
RST
Reverts to factory settings
and deletes all personal
settings.
ebeco.com
EBT 350 vers B20 EN 100720