EBECO EB-Therm 205 User manual

Arrow keys [ ]
Getting started with EB-Therm
Using the menu
Exit the menu*
1 sec.
Turning o and on Locking the keypad
1 sec.
Scroll
To standby* Out of standby
Quick guide to EB-Therm 205
Get started quickly and easily! Here you have a guide to the most important functions
and settings, an introduction to the energy saving programs and an overview of the
menu system.
Always read the entire manual for complete product information.
Start the menu Scroll through
the options
*The heat is not being regulated. The clock is
running and any settings are saved in the memory.
This is what the display looks like when you
rst start EB-Therm.
Lock Unlock
*Or wait 30 seconds to exit automatically.
4 sec.
ebeco.com
On/o button
Selection button [ ]
Selected control
Temperature

More on temperature The EB-Therm 205 can regulate the temperature in three dierent ways;
a oor thermostat, a room thermostat or a room and oor thermostat. This enables the comfort
temperature and any ooring temperature requirements to be combined. If the oor sensor is con-
nected when the thermostat is turned on for the rst time, the oor thermostat is selected automat-
ically. The room thermostat cannot be selected when the oor sensor is connected. The room and
oor thermostat should be used in rooms with wooden ooring and in rooms with large windows
that are exposed to solar insolation. Read more about the control functions and how you set them
in the manual. Actual temperatures can be read at all times by following the above description.
To be able to use all the functions you need to set the time and date rst.
Show actual temperature
Time and date
Scroll to the
correct time*
*Repeat the last two steps to set minutes, day, month and year.
The weekday is set automatically but not displayed.
Desired temperature
Basic settings
Lock buttons rst
Temp. in the oor*
*If the thermostat is set to Floor thermostat.
Otherwise the room temperature (R) is displayed.

Energy saving programs
Start/stop programs
Conrm when the
correct symbol is
ashing*
Symbol shows that a
program is running
*Stop program: Conrm when no symbol is ashing.
Save energy cleverly and easily! With these programs the heating is adapted to your actual needs
and the heat is turned down when it isn’t needed. There are two program options:
Program for oce
environments
Preset for home
environments
The temperature is automatically reduced by 5°C during the following
periods:
Monday-Friday, 8.30am-3pm
Monday-Sunday, 11pm-5am
The temperature is automatically reduced by 5°C at all times except for
Monday-Friday, 6am-6pm

Sitemap of the menu
This is how the menu in EB-Therm 205 is structured. Here you can quickly see where all the func-
tions and settings are.
CONT
Set the display contrast
1-8
PROG
Start/stop programs
Home programs
Oce programs
SET
Various settings
CLK
Set time and date.
S
Turn o and on automatic
change to DST
RNF
Set how the temperature is to be
regulated. F (oor thermostat) -
R(room thermostat) – R & F
OH
Set the temperature to
restrict the oor sensor for
R & F.
DISP
Set how time will be shown,
24- or 12-hour format.
AF
Turn o and turn on the
adaptive function.
END
Exit the menu and return to
basic mode.
LOCK
Locks the keypad
END
Exits the menu
ebeco.com
RST
Reverts to factory settings
and deletes all personal set-
tings.
EBT 205 EN 160824