Eminent EM8660 User manual

EM8660
Wireless door / window contact
(2-way communication)

2 | ENGLISH
EM8660 - Wireless door / window contact
Table of contents
1.0 Introduction ........................................................................................................... 2
1.1 Packing contents ............................................................................................... 2
2.0 Front window/door sensor ..................................................................................... 3
3.0 Inside the window/door sensor .............................................................................. 3
3.1 Anti sabotage button .......................................................................................... 3
3.2 Group settings (jumpers) ................................................................................... 4
4.0 Installation tips ....................................................................................................... 4
4.1 Register the window/door sensor ....................................................................... 5
5.0 Frequently Asked Questions and other related information .................................... 5
6.0 Service and support ............................................................................................... 6
7.0 Warning and points of attention ............................................................................. 6
8.0 Warranty conditions ............................................................................................... 7
9.0 Declaration of Conformity ...................................................................................... 8
1.0 Introduction
Congratulations with the purchase of this high-quality Eminent product! This product
has undergone extensive testing by Eminent’s technical experts. Should you
experience any problems with this product, you are covered by a five-year Eminent
warranty. Please keep this manual and the receipt in a safe place.
Register your product now on www.eminent-online.com and receive product updates!
1.1 Packing contents
The following parts need to be present in the packing:
 EM8660 Wireless Door/ Window Contact
 Manual

3 | ENGLISH
2.0 Front window/door sensor
LED indicator :
Flashes 1x : Window/Door is detected as open.
Flashes quickly : Battery power low, exchange battery*
* You will receive a text message if battery level is low. The message contains the
following information (up to sensor 9) sensor name with additionally the text ‘battery
almost empty’. From sensor 10 the name will be replaced for a zone nr. with
additionally the text ‘battery almost empty’.
3.0 Inside the window/door sensor
3.1 Anti sabotage button
If the sensor is opened this switch will detect it and trigger the alarm.
LED Indicator
Sensor Magnet
Group settings (jumpers)
Anti sabotage
button

4 | ENGLISH
3.2 Group settings (jumpers)
Every sensor can be configured to be added to a single group by setting the jumper
settings; home-group, normal group, single group or 24-hours group.
Bellow you will see an overview of the meaning and how to configure the jumper
settings for that type of zone.
Remark : Determine before pairing with the alarm system in which group the sensor
will be operational. Once the sensor is successfully paired with the system. The group
cannot be changed after pairing!
Remark: If the group of a sensor needs to be changed All sensors need to be paired
with the alarm system once more. It is not possible to remove one single sensor from
a group ! (See chapter “Delete all wireless sensors by text message”)
Remark : It’s recommended to install detectors that needs to be operational 24-hours
for example: smoke detectors in the 24-hours-group.
4.0 Installation tips
It’s recommended to install the sensor on the frame (no movement) and to
install the magnet on the door/window itself.
Notice: The magnet needs to be placed on the right side of the sensor. The red LED
will light up every time the door/window is opened!
24-hours-group
Home-group
Normal-group
Single-group

5 | ENGLISH
The distance between the sensor and the magnet must not exceed 1cm.
Mount both parts with the supplied double-sided tape. You can also choose to mount
the sensor by using screws.
It’s not recommended to install the sensor in a room with a lot of metal. Neither mount
the sensor on constructions. Always check if the red LED will turn on when the door
/window is opened.
4.1 Register the window/door sensor
Make sure the sensor and the magnet are located next to each other.
Enter the password and press button on the control panel.
The LED will turn on. Now separate the magnet from the sensor. The sensor will
be triggered. If you hear a beep the sensor is registered to the system. If you hear
2 beeps this indicates this sensor is already registered.
5.0 Frequently Asked Questions and other
related information
The latest Frequently asked questions for your product can be found on the support
page of your product. Eminent will update these pages frequently to assure you have
the most recent information. Visit www.eminent-online.com for more information about
your product.

6 | ENGLISH
6.0 Service and support
This users manual has been carefully written by Eminent’s technical experts. If you
have problems installing or using the product, please fill out the support form at the
website www.eminent-online.com/support.
You can also contact us by phone. Below you will find a list with phone numbers for
each supported country.
Country
Phone number
Rate per minute*
Belgium (Dutch) 070 277 286 €0.30
Belgium (French) 070 277 286 €0.30
Denmark [phone] Local Costs
Finland [phone] Local Costs
Germany [phone] Local Costs
Italy [phone] Local Costs
Norway [phone] Local Costs
Spain 807 080 042 €0.41
Sweden [phone] Local Costs
The Netherlands 0900-3646368 €0.10
UK [phone] Local Costs
Hungary 1-4088902 (From
Budapest)
Local Costs
Hungary 06-1-4088902 (From the
rest of Hungary)
Local Costs
Hungary [phone]
(International)
Local Costs
* Rates mentioned in this table do not include cell phone charges.
7.0 Warning and points of attention
Due to laws, directives and regulations set out by the European parliament, some
(wireless) devices could be subject to limitations concerning its use in certain
European member states. In certain European member states the use of such devices
could be prohibited. Contact your (local) government for more information about this
limitations.
Always follow up the instructions in the manual*, especially where it concerns devices
which need to be assembled.
Warning: In most cases this concerns an electronic device. Wrong/improper use may
lead to (severe) injuries!

7 | ENGLISH
Repairing of the device should be done by qualified Eminent staff. The warranty
immediately voids when products have undergone self repair and/or by misuse. For
extended warranty conditions, please visit our website at www.eminent-
online.com/warranty.
*Tip: Eminent manuals are written with great care. However, due to new technological
developments it can happen that a printed manual does not longer contain the most
recent information.
If you are experiencing any problems with the printed manual or you cannot find what
you are looking for, please always check our website www.eminent-online.com first for
the newest updated manual.
Also, you will find frequently asked questions in the FAQ section. It is highly
recommended to consult the FAQ section. Very often the answer to your questions will
be found here.
8.0 Warranty conditions
The five-year Eminent warranty applies to all Eminent products, unless mentioned
otherwise before or during the moment of purchase. After buying a second-hand
Eminent product the remaining period of warranty is measured from the moment of
purchase by the product’s initial owner. Eminent warranty applies to all Eminent
products and parts, indissolubly connected or mounted to the product it concerns.
Power supply adapters, batteries, antennas and all other products not directly
integrated in or connected to the main product or products of which, without
reasonable doubt, can be assumed that wear and tear during use will show a different
pattern than the main product, are not covered by the Eminent warranty. Products are
not covered by the Eminent warranty when exposed to incorrect/improper use,
external influences or when opening the service parts of the product by parties other
than Eminent. Eminent may use refurbished materials for repair or replacement of
your defective product. Eminent cannot be held responsible for changes in network
settings by internet providers. We cannot guarantee that the Eminent networking
product will keep working when settings are changed by the internet providers.
Eminent cannot guarantee the working of web services, apps and other third party
content that is available through Eminent products. Eminent products with an internal
hard disk have a limited warranty period of two years on the hard disk. Eminent could
not be held responsible for any data lost. Please make sure that if the product stores
data on a hard drive or other memory source, you will make a copy before you return
the product for repair.
When my product gets defective
Should you encounter a product rendered defective for reasons other than described
above: Please contact your point of purchase for taking care of your defective product.

8 | ENGLISH
9.0 Declaration of Conformity
Application of Council Directives:
Manufacturer’s Name: Eminent
Type of Equipment: Wireless Door/Window Contact
Equipment Class: Commercial, Light Industrial, Consumer
PRODUCTNUMBER: EM8660
Conforms to the following standards: EN301 489-1 V1.8.1:2008 EN50371:2002
EN301 489-3 V1.4.1:2002
EN60950-1:2006 +11:2009+A1:2010
EN300 220-1 V2.3.1:2010
EN300 220-2 V2.3.1:2010
Manufactured from: 2013-06-04
I, the undersigned, hereby declare that the equipment Conforms with the essential
requirements and other relevant requirements of the R&TTE Directive (1999/5/EC)
and to the above standards.
Place: Barneveld, The Netherlands
Date: 2013-06-04
Name: Marc Pannebakker
Signature:
EM8660 | 03-2014