Empire Comfort Systems DF362NB-1 User manual

41777-0-0220 Page 1Empire Comfort Systems Inc. • Belleville, IL
INSTALLATION INSTRUCTIONS
DECORATIVE FIREPLACE FRONT
BEVELED WINDOW FRAMES: DF362(NB,XBZT)-1 AND DF422(NB,XBZT)-1
FOR USE ON (A)DVCX SERIES FIREPLACES
MODEL NUMBER DESCRIPTION FITS (A)DVCX FIREPLACE SIZE
DF362NB Beveled Window Frame - Brushed Nickel 36”
DF422NB Beveled Window Frame - Brushed Nickel 42”
DF362XBZT
Beveled Window Frame - Oil Rubbed Bronze 36”
DF422XBZT
Beveled Window Frame - Oil Rubbed Bronze 42”
NOTE: The rear of the Beveled Window Frame is unnished.
2. Move the four screws (two each side) to the forward holes.
See Figure 2.
Figure 2
CLEANING
With the unit turned off and cool to the touch, use a 50/50 solution
of vinegar and water and a clean soft cloth to remove dirt and
ngerprints.
Clean doors and/or frame before and after start-up and again anytime
oil or ngerprints are present.
When heated, oil from ngerprints or left over from manufacturing
can permanently discolor the plating.
INSTALLATION
ATTENTION: Leave Barrier Screen in place when installing fronts.
1. Remove lower panel by lifting it up and out. See Figure 1.
a. Retain lower panel for future use. Turn to page 2.
Figure 1

41777-0-0220Page 2
3. Slide the decorative front onto the glass frame over the barrier
screen so the notches hang on the four screws. See Figure 3.
Figure 3
4. Replace lower panel removed in Step 1. See Figure 4.
Figure 4
www.empirecomfort.com
Empire Comfort Systems Inc.
Belleville, IL
If you have a general question
about our products, please e-mail
us at [email protected].
If you have a service or repair
question, please contact your dealer.