Empire Comfort Systems EMBC-1S-C-1 User manual

19726-3-0414 Page 1Empire Comfort Systems Inc. • 918 Freeburg Avenue • Belleville, IL 62220
Empire Comfort Systems, Inc. Nine Eighteen Freeburg Ave. Belleville, Illinois 62220-2623
INSTRUCTIONS MUST BE LEFT WITH THE OWNER FOR FUTURE REFERENCE AFTER INSTALLATION.
MANTEL ASSEMBLY INSTRUCTIONS
EMBC-1S-(C,DO,O,UH,UO,W)-1 EMBC-2S-(C,DO,O,UH,UO,W)-1
EMBC-3S-(C,DO,O,UH,UO,W)-1 EMBC-4S-(C,DO,O,UH,UO,W)-1
EMBC-5S-(C,DO,O,UH,UO,W)-1 EMBC-6S-(C,DO,O,UH,UO,W)-1
EMBC-7S-(C,DO,O,UH,UO,W)-1 EMBC-8S-(C,DO,O,UH,UO,W)-1
CORNER CABINET MANTEL
EFFECTIVE DATE DECEMBER, 2005
1. Place in desired location.
2. Position left side and right side assembly against base.
3. Attach mounting strips in corner with 2 1/2" screws level
mounting strips with left and right assembly.
Figure 1
4. Remove left side and right side assembly.
5. Place replace on base and route gas line to replace.
Figure 2
MOUNTING STRIP
MOUNTING STRIP
LEVEL
LEFT SIDE ASSEMBLY
BASE
6. Position left side and right side assembly against base.
RIGHT SIDE ASSEMBLY
Figure 3
7. Position breast board assembly to the front of left side
and right side assembly.
Figure 4
BREAST BOARD

19726-3-0414Page 2 Empire Comfort Systems Inc. • 918 Freeburg Avenue • Belleville, IL 62220
8. Use six (6) 1 1/4" screws to attach breast board assem-
bly to left side and right side assembly.
Figure 5
9. Attach L bracket to top of rebox to secure mantel to
rebox.
Figure 6
(6)11/4” SCREWS
“L” BRACKET
10. Place mantel top rear and mantel top front onto mount-
ing strips, mantel sides, and breastboard.
Figure 7
Figure 8
11. Cut top trim according to mantel size.
12. Attach top trim to mantel top with 1" nish nails.
13. Installation of corner mantel is complete.
Figure 9
TOP REAR
TOP FRONT
TOP TRIM