Empire Comfort Systems LK6-1 User manual

32752-1-0414 Page 1Empire Comfort Systems Inc. • 918 Freeburg Avenue • Belleville, IL 62220
Tools Needed:
Phillips Screwdriver
Carton Contents:
Light Assembly
4 - #10 x 1/2” Screws
Bezel
Glass
Gasket
Light Bulb
Installation
1. Remove the four screws securing the metal plate and gasket
to the top of the rebox and discard. See Figure 1.
Figure 1
2. Disconnect the two leads from the light assembly to the con-
trol assembly.
3. While wearing gloves, attach the light bulb to the light socket.
4. Feed the light kit wiring through the cut-out and down the right
side of the unit.
LK6-1 LIGHT KIT
INSTALLATION INSTRUCTIONS
For Use on Models
DVCP & DVCC
INSTRUCTIONS MUST BE LEFT WITH THE OWNER FOR FUTURE REFERENCE AFTER INSTALLATION
5. Secure the bezel, glass, gasket and light assembly to the
rebox with four screws. See Figure 2
Figure 2
6. Reconnect the wires disconnected in step two and connect
the power source to the wall outlet.
GAS-FIRED
fire-parts.com

32752-1-0414Page 2 Empire Comfort Systems Inc. • 918 Freeburg Avenue • Belleville, IL 62220
1
2
3
4
5
6
DISCONNECT HERE TO INSTALL
LIGHT.
LIGHT KIT PARTS LIST
INDEX
NO.
PART
NUMBER DESCRIPTION QTY
1 32792 ACCENT LIGHT ASSEMBLY 1
2 R9342 ACCENT LAMP BEZEL 1
3 R9658 ACCENT LAMP GASKET 1
4 R11752 ACCENT LAMP GLASS 1
5 R10928 LIGHT BULB, 35W 1
6 R2737 SCREWS-#10 x 1/2 4
fire-parts.com