Enabling Devices Gooshey Switch 636 User manual

Soft and sparkly!
Soft and sparkly!Soft and sparkly!
Soft and sparkly!
Many therapists and teachers have been asking us to make a
squeezable “Gooshy Switch” We found a durable, soft, sparkly pillow
and converted it into two switches: Gooshy Switch and a Gooshy
Switch with Lights, Vibration, and Music The Lights, Vibration and
Music Switch has a special control which allows the user to select any
or all of the rewards It can be used alone as a sensory device Size:
10"L x 4½"W x 2"H Requires 2 AA Batteries Weight: 1¼ lb
Operation:
Operation:Operation:
Operation:
1 The Gooshey Switch requires two AA batteries The battery
compartment is located under the base of the unit Carefully
turn the switch over, and then remove the battery cover with
a small Philips screwdriver Install new batteries, being
careful to observe proper battery polarity Alkaline batteries
are recommended because they last longer
2 Replace the battery case cover and secure it with the small
screw Do not over-tighten
3 To turn on or off the desired stimuli (1-vibration; 2-music; 3-
lights), push the small white rocker switches to the on or
(open position) Open position means off Please see Fig 1
Figure 1
Figure 1Figure 1
Figure 1
4 Press anywhere on the Gooshey surface and you will be
rewarded with the selected stimuli vibration, lights & music
5 To operate as a switch connect an external toy or device via
the 1/8-inch cord jack on the unit If you need to use a ¼"
adaptor, it must be a mono adaptor, not stereo Press
anywhere on the Gooshey surface to activate your toy or
device Once you release pressure from the switch your toy
or device will turn off
Troubleshooting:
Troubleshooting:Troubleshooting:
Troubleshooting:
Problem:
Problem: Problem:
Problem: The Gooshey Switch does not operate properly
Action # 1:
Action # 1: Action # 1:
Action # 1: Make sure the batteries are in the battery compartment
properly, and making good contact
Action # 2:
Action # 2: Action # 2:
Action # 2: Make sure you have the desired stimuli selected as
explained in operation No 3
Action # 3:
Action # 3: Action # 3:
Action # 3: If the unit still does not work properly, replace the
batteries
Problem:
Problem:Problem:
Problem: The Gooshey Switch does not activate a connected
toy/device
Action #1:
Action #1:Action #1:
Action #1: Make sure all connections are plugged in all the way
There should be no gaps
Action #2:
Action #2:Action #2:
Action #2: Check batteries in toy/device, replace if weak or dead
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit:
The Gooshey Switch can be wiped clean with any household multi-
purpose cleaner and disinfectant
Do not submerge
Do not submergeDo not submerge
Do not submerge the unit, as it will damage the contents of the top
and the electrical components
Rev 2/2/17
Rev 2/2/17Rev 2/2/17
Rev 2/2/17

For Technical Support:
For Technical Support:For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a m to 5 p m (EST)
1-800-832-8697
customer_support@enablingdevices com
Gooshey Switch #636
(With Vibration, Lights & Music)
USE ’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel [phone] / Fax [phone]
Toll Free 800 832 8697
www enablingdevices com