Enclume PR11 User manual

Enclume CEILING BAR
PR11
Enclume racks are the ultimate in
Quality, design, strength and function.
Congratulations for owning one of the finest
Storage racks made.
WARNING:
READ ALL OF THE INSTRUCTIONS
BEFORE ASSEMBLING AND USING
YOUR RACK.
All of our hammered steel racks are finished with an industrial wax designed to
give years of protection to the rack. Cleaning is easily done with a damp cloth. Dry
thoroughly after cleaning. If a touch-up is ever needed we recommend a "Pledge"
like wax product.
Enclosed you will find everything needed for the assembly
and use of your storage rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
2 – Ceiling Screw Hooks
Components included:
1 – Rolled end bar
2 – Vertical Bar
2 – C-Ring *
2 – U Clamp *
2 – Pins *
18 – Angled Pot Hooks – 96” Rack
12 – Angled Pot Hooks – 72” Rack
12 – Angled Pot Hooks – 54” Rack
12 – Angled Pot Hooks – 48” Rack
6 – Angled Pot Hooks – 36” Rack
*If you have a 96” rolled end bar, you will have received 3 each of these items.
See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS
Limited Warranty:This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
warranty period and (2) customer returns the defective product to Enclume Design Products, Inc. , 24 Colwell St.. , Port Hadlock, WA 98339, postage prepaid
within 20 days following a return authorization number (which may be obtained by telephoning the number at the bottom of this instructions) being provided to the
customer by Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.

ASSEMBLY AND INSTALLATION INSTRUCTIONS for PR11
Enclosed you will find everything needed for the assembly
and use of your storage rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
2 – Ceiling Screw Hooks
Components included:
1 – Rolled end bar
2 – Vertical Bar
2 – C-Ring *
2 – U Clamp *
2 – Pins *
18 – Angled Pot Hooks – 96” Rack
12 – Angled Pot Hooks – 72” Rack
12 – Angled Pot Hooks – 54” Rack
12 – Angled Pot Hooks – 48” Rack
6 – Angled Pot Hooks – 36” Rack
*If you have a 96” rolled end bar, you will have received 3 each of these items.
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Rack Assembly
1) If your rack is plated it is best to keep the tissue on during installation to avoid fingerprinting.
2) Your rack must be anchored into the solid wood of ceiling joists or beams. Plasterboard or wall fasteners will not work and
should not be used. Carefully measure the area where the rack is to be hung and install. Your local hardware store can advise
you if special hardware is needed for your particular kitchen.
3) Hang a C-Ring from each ceiling screw hook and a vertical bar from each C-Ring.
4) Slip the U Clamps under the bar and hold the rack up to the vertical bars while your helper inserts the two pins through the U
Clamps and the vertical bars. Position the pin so that the slot “lockS” into the vertical bar. Square up the unit. For stability, hang
your heaviest items in the middle of the rack between the vertical bars.
5) All of our hammered steel racks are finished with an industrial wax designed to give years of protection to the rack. Cleaning is
easily done with a damp cloth. Dry thoroughly after cleaning. If a touch-up is ever needed we recommend a "Pledge" like wax
product.
6) The care and cleaning of our copper and brass units must be done with a low abrasive cleaner such as “Flitz”. Chrome racks are
best cleaned with a good quality glass cleaner like “Windex”. Our high quality plating will age & tarnish the same as solid
material. A periodic cleaning will restore your rack to its original brilliance.
It is important that your rack is assembled correctly. If the unit is assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.
WARNING