Enclume Pr36-elite User manual

PR36-Elite Bookshelf Rack

Enclosed you will find everything needed for the assembly

and use of your storage rack. Two people make assembly

and installation easier. The parts and hardware included are:

Hardware included:

2 –5/16” x ¾” Button Head Screws

2 – 5/16 Hex Nuts

1 – 3/16 Allen Wrench

4 – 2” Lag Screw

4 – “L” Shaped Grid Brackets

Toggle Kit

Components included:

1 – Rack Body

2 – Arms

1 – Grid

6 – Angled Pot Hooks

6 – Straight Pot Hooks

See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS

Thank you for choosing Enclume!

Enclume racks are the ultimate quality,

design, strength and function.

WARNING: READ ALL OF THE

INSTRUCTIONS BEFORE

ASSEMBLING AND USING YOUR

RACK

If you need help, please call 1-877-ENCLUME

Enclume Design Products

24 Colwell Street, Port Hadlock, WA 98339

Phone 360-385-6100 Fax 360-385-6156

www.enclume.com

ASSEMBLY AND INSTALLATION INSTRUCTIONS

Rack Assembly

1) Place the rack body on a flat surface. Begin by attaching one “L” shaped grid bracket to the inside front of the body along with

the one of the arms on the outside, front using the 5/16” x ¾” Button Head screws from the outside. Secure with the 5/16”

Hex Nuts on the inside. Repeat for second grid bracket and arm.

2) We recommend that you anchor your rack into the solid wood. Carefully measure the area where the rack is to be hung and

install the rack with the 2” lag screws directly into the wood. If it is not convenient to hang your rack directly into wood joists

you may use the included DRYWALL anchors enclosed with your rack. See Toggler® brand manufacturer recommendations for

weight limits included in the instructions in the Toggler kit.

3) After the rack has been mounted onto the wall, place the grid into it with the long wires facing up. Push the grid against the back

of the rack so there is clearance for the pot hooks to hang along the front bar.

It is important that your rack is assembled correctly. If the unit is assembled or used

incorrectly, it could become unstable and collapse, possibly causing injury.

Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall

be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the

warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20

days following a return authorization number (which may be obtained by telephoning the number at the top of this instructions) being provided to the customer by