Enclume DR34 User manual

Décor Bookshelf Rack with Wood
Enclosed you will find everything needed for the assembly
and use of your storage rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
2 –1"x 5/16"Button Head Screws
4 – 2"Lag Screws
1 – 3/16"Allen Wrench
Toggle Kit (Drywall anchors)
Components included:
1 – Rectangular Base with Wood Front
2 – Arms
3 – Grid Brackets
1 – Grid
6 – Angled Pot Hooks
6 – Straight Pot Hooks
See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS
Thank you for choosing Enclume!
Enclume racks are the ultimate in
quality, design, strength and function.
WARNING: READ ALL OF THE
INSTRUCTIONS BEFORE
ASSEMBLING AND USING YOUR
RACK
If you need help, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Phone [phone] Fax [phone]
www.enclume.com
DR34

ASSEMBLY AND INSTALLATION INSTRUCTIONS
Rack Assembly
1) Remove one of the 1"x 5/16"button head screws from one side of the front of the rack. Place one of the
arms in front of the hole and using the button head screw, attach the arm to the front of the rack carefully
screwing through the steel of the end of the rack and into the wood. Repeat on the other side.
2) We recommend that you anchor your rack into the solid wood of wall studs. Carefully measure the area
where the rack is to be hung and install the lag screw directly into the wood studs. If it is not convenient to
hang your rack directly into wood you may use the included DRYWALL anchors included in the toggle
pack enclosed with your rack. See Toggler® brand manufacturer recommendations for weight limits
included in the instructions in the Toggle kit.
3) After the rack has been mounted onto the wall, place the grid brackets perpendicular to the rack inserting
into the pre-existing holes in the wood and placing the other end over the back of the rack.
4) Distribute the weight of your cookware evenly around the rack and grid.
WARNING
Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20
days following a return authorization number (which may be obtained by telephoning the number at the top of this instructions) being provided to the customer by
Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.
It is important that your rack is assembled correctly. If the unit is assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.