Esco 10960 User manual

Operating Instructions
Model 10960
COMPLIES WITH
EN12645: 2014*
DIAL GAUGE T I RE INFLATOR

2
Thank you for selecting this ESCO Dial
Gauge Tire Inflator. Please read this manual
before carrying out any installation or
service procedure.
This manual is an integral and essential part of
the product, please keep it away from damp,
heat, dust, oils, do not remove, tear or amend
any parts of the manual for any reason. It
must be made available to the operator and
to maintenance personnel, also to ensure staff
training.
If you lose or damage the manual, ask the
manufacturer for a copy, quoting the Part No.
The manual must always remain with the
machine, in the event of the machine being sold,
it must be given to the new user.
The manufacturer reserves the right to change
product features at any time without notice.
FEATURES
OPE R ATIO N
WARNING
To avoid the risk of personal injury, especially
to the eyes, face or skin, DO NOT direct
the air stream at any person, or any part of
the body.
This equipment is not intended for use by
children without adult supervision.
The manufacturer reserves the right to
change product features at any time
without notice.
• Units of measure (p.s.i., bar)
•Inflates to 12 bar, 174 p.s.i.
• One button operation has 3 functions:
inflates, deflates & reads tire pressure
•Large easy to read 3 in. | 75 mm
gauge display
• Tough aluminum die cast body with
rubber sleeve
• I ndividually calibrated and tested
(see calibration certificate)
1) Remove tire valve cap.
2) With clip-on air chuck lever depressed,
firmly press chuck onto tire valve stem and
release lever, ensure that no air leaks.
3) Press the tire inflator lever to inflate, press
the lever half-way to deflate.
4) Tire pressure will read when inflator lever is
in the neutral position.

3
CALIBRATION CERTIFICATE
The Dial Gauge Tire Inflator has been
calibrated in its normal working position on
test equipment with an accuracy that is
traceable to International Standards according
to: 86/217/EEC
Serial Number:
Date:
ALLOWABLE TOLERANCE
BAR
±0.08 up to and including 4 bar
±0.16 between 4 bar and 10 bar
inclusive
±0.25 greater than 10 bar
p.s.i.
±1.2 up to and including 58 p.s.i.
±2.3 between 58 and 145 p.s.i.
inclusive
±3.6 greater than 145 p.s.i.
TEST RESULT
REFERENCE PRESSURE
BAR P.S.I.
DISPLAY PRESSURE
BAR P.S.I.
29.058.0 87.0 116.0

www.esco.net
Distributed by
ESCO - Equipment Supply Co.
15270 Flight Path Drive, Brooksville FL, 34604
[email protected]
For more information contact Customer Service on
1-800-352-9852
SPECIFICATIONS
Hose length 20 in. with swivel
Chuck type Clip on
Gauge display size 3 in. | 75 mm
Accuracy exceeds 86/217/EEC
Units of measure bar, psi
Ination range 0-12 bar
0-174 psi
Accuracy +/- 2 psi @ 25-75psi
Supply Pressure Max. 13.79 bar
200 psi
Inlet Size 1/4” NPT
Dimensions 11L x 6W x 4H in.
Weight 2.6 lbs. | 0.8 kg