Esco Pro Series User manual

Operating Instructions
Model 10962
DIGITAL T I RE INFLATOR
COMPLIES WITH
EN12645: 2014*
COMPLIES WITH
EN12645: 2014*

2
Digital Tire Inflator
Thank you for selecting the Digital Tire Inflator, please read this manual carefully before
using.
This manual is an important part of this product and be should stored safely for future
reference. It should be made available for new operators and maintenance personnel.
We reserve the right to change product features at any time.
IMPORTANT
This tire inflator must only be connected to air line systems which have clean dry air. Any
moisture in the air line system may cause damage to the operation of this tire inflator and
void warranty.
Operation
■To read pressure:
Place hold-on chuck squarely and firmly onto tire valve, before each pressure reading
fully depress lever and release.
Check pressure gauge, the digital display will activate once the tire pressure is sensed.
If no pressure is sensed the display will not turn on, please press trigger to add air into
tire, before reading pressure.
■To inflate:
Place hold-on chuck squarely and firmly onto tire valve.
Fully depress lever for an appropriate period of time and release lever.
Check pressure gauge and repeat procedure until correct pressure level
is achieved.
■To deflate:
Place hold-on chuck squarely and firmly onto tire valve.
Depress lever half way (until air can be heard escaping) for an appropriate period of
time and release lever.
Check pressure gauge and repeat procedure until correct pressure level is achieved.
Safety
■Never exceed the maximum pressure of the tire.
■Check that hose and chuck are in good condition with no damage or
cracks.
■Ensure safe working environment when using compressed air.
■Place hold-on chuck squarely and firmly onto tire valve.
■Return to authorized service agent for repair and maintenance.

3
PART NO. 10962
Scale
change
button
Battery Change
This inator requires 2 x AAA batteries. If the voltage of the batteries fall below 2.6 volts, the battery icon
will ash continuously until it shuts down. If the voltage of the batteries fall below 2.5 volts, the low “LO”
battery icon appears while the power is on and then shuts down automatically. The batteries must be
changed if the battery icon ashes.
Scale Change
Press and hold the scale change button to activate the display,
once the display is activated press and hold the button for 2
seconds to change the display scale.
1. Unscrew the battery cap
2. Slide the batteries into the inator with the
positive end facing out of the inator
3. Replace the battery cap carefully and do
not over tighten
WARNING
Important: To avoid the risk of personal injury, especially to the eyes, face or skin, DO NOT
direct the aim stream at any person or body parts

www.esco.net
Distributed by
ESCO - Equipment Supply Co.
15270 Flight Path Drive, Brooksville FL, 34604
[email protected]
For more information contact Customer Service on
1-800-352-9852
SPECIFICATIONS
Description Pro Series Digital Tire Inflator / Model 10962
Type of Inator Digital
Reader unit Digital LCD backlit display
Chuck type Hold-on
Chuck style Dual angle
Max. ination 174 psi | 12 bar
Scale psi / kPa / bar
Inlet size 1/4" NPT
Hose length 20 in. | 500 mm
Dimensions 8 in. L x 2 in. W x 2.75 in. H (200 mm L x 50 mm W x 70 mm H)
Weight 2 lbs. | 0.8 kg
Accuracy* ± 2 psi @ 25-75 psi
Operation Inate, deate, measure
Supply pressure max. 200 psi
Powered by 2 x AAA (included)
Battery life (continuous use) 80 hours
Ination speed 500 L/min - (18 cfm) @188 psi
ALLOWABLE TOLERANCE
psi
+/-1.2 up to and including 58 psi
+/-2.3 between 58 and 145 psi inclusive
+/-3.6 greater than 145 psi
TEST RESULTS
Reference pressure psi 29.0 58.0 87.0 116.0
Display pressure psi
IMPORTANT
No responsibility is accepted for
incorrect use of this product.
Calibration CertifIcate
This Tire Inflator Model 10962 has been calibrated in its normal working position on test
equipment with an accuracy that is traceable to standards according to: EN12645: 2014
Serial Number: Date:
* Tire pressure measuring instruments,
devices for inspection of pressure and/or
inflation/deflation of tires for motor vehicles.