ETEKCITY EK6212-S User manual

1
Questions or Concerns? [phone] • [e-mail]
Digital Kitchen Scale
Model No.: EK6212-S

2
Thank You.
Thank you for purchasing the EK6212-S Digital
Kitchen Scale by Etekcity. We are dedicated to
providing our customers with quality products
for building a better living. Should you have any
questions or concerns about using your new
product, feel free to reach out to our helpful
customer support team at [phone] or by
email at [e-mail]. We hope you enjoy
your new product!

3
Package Contents
1 x Digital Kitchen Scale
1 x Measuring Spoon
2 x 1.5V AAA batteries
1 x User Manual
Table of Contents
Safety Information 4
Main Functions 5
Set-Up 6
Operation 7
Weight Measurement 7
Volume Measurement 8
Tare Function 9
Maintenance 9
Specifications 10
Troubleshooting 11
Warranty 12
Customer Support 13

4
Safety Information
IMPORTANT: Please read and comply with all
of the instructions and warnings provided in this
manual before using the product. Failure to comply
with the instructions and warnings provided herein
may result in inaccurate results and/or damage to
the product itself.
• Always place the scale on a hard, dry, and flat
surface before measurement in order to ensure
accurate results.
• Dirt, dust, vibration, wind, air currents, and
electromagnetic interference may contribute to
inaccurate results.
• DO NOT exceed the 11 lb (5 kg) weight capacity;
doing so may damage the scale. An overload
indicator will appear on the LCD display if the
limit is exceeded.
• Avoid exposing the device to damp environments
or extreme temperatures.
• DO NOT immerse the scale in water or corrosive
liquids. If a liquid is spilled on the digital display
or buttons, immediately wipe the scale clean with
a soft cloth in order to avoid potential internal
damage.
• When replacing batteries, make sure to insert
them under the correct polarity as indicated
within the battery compartment.
• If the low battery indicator is displayed, please
replace the batteries.
• DO NOT mix new and used batteries to power the
device.
• This scale is not intended for commercial or
heavy-duty use.
• Handle the scale with care. Keep the scale in a
cool, dry environment.
• If the scale fails to turn on, check if the batteries
are installed correctly. Replace the batteries if
necessary.
• If the scale is not in use for an extended period of
time, remove the batteries to conserve battery life
and extend the lifetime of the scale.

5
Main Functions
Digital Display
Function Diagram
1. Weighing Platform
2. LCD Display
3. Unit Button
4. Power/Zero Button
5. Anti-skid Padding
6. Battery Compartment
1. Weight Value
2. Tare Mode
3. Zero Weight
4. Negative Weight Value
5. Mode
6. Measurement Unit
1
3
2
1
6
3
4
5
5
2 4 6
Icon Mode Units Use
Weight Mode lb:oz / g Measures the weight of food and solid objects.
Milk Volume fl’oz / ml Measures the volume of milk and other liquids with similar densities.
Water Volume fl’oz / ml Measures the volume of water and other similar liquids.

6
Set-Up
1. Open the battery compartment on the underside
of the scale.
2. Insert the included AAA batteries, making sure
they are under the correct polarity. Place the
battery cover back on.
3. Press the ‘Power/Zero’ button to turn on the
scale.
Unit Conversion
Your new kitchen scale’s default measurement units
are metric units (ml, g, kg). To switch the scale to
imperial units (lb:oz, fl’oz.), simply press and hold
the ‘Unit’ button for 3 seconds.
Press and hold the ‘Unit’
button for 3 seconds.

7
weight.
5. Press and hold ‘Power/Zero’ for 3 seconds to turn
off the scale.
Operation
Weight Measurement Mode
1. Place the scale on a flat, dry surface.
2. Press ‘Power/Zero’ to turn on the scale.
3. Press ‘UNIT’ to select your desired measuring
unit. Allow the scale to read zero before
measuring.
4. Gently place your object on the scale. The LCD
display will automatically display the object’s
NOTE: The scale with automatically turn off after 2
minutes of inactivity.

8
Volume Measurement Mode
Place the scale on a flat, level surface, then press
the power button to turn it on.
1. Press the ‘Unit’ button to select either the milk or
water volume measurement mode.
2. The scale will display “0” when ready.
3. Place an empty container onto the platform. The
screen will display the container weight.
4. Press the ‘Power/Zero’ button to tare the weight
of the container.
5. Once the screen displays “0” pour the liquid into
the container. The LCD screen will automatically
display the final volume.
NOTE: To reset, remove all weight from the platform
and press the ‘Power/Zero’ button.

9
Tare Function
The tare function allows you to measure objects in a
container without having to include the container’s
weight in the final measurement.
1. Place the scale on a flat, dry surface.
2. Power on the scale and wait for the display to
read zero.
3. Place an empty container on the scale and press
‘Power/Zero.’ The display will now show zero.
4. Place objects in the container, and the display will
show weight of the items.
5. Take the container off the platform when you
have finished weighing your items. Press ‘Power/
Zero’ once to reset the scale.
Maintenance
Use a slightly damp cloth to clean the surface of
the scale, followed by a dry soft cloth to wipe away
the remaining moisture. You can also use a dry soft
cloth to wipe off any dust that may be on the scale.
Be sure not to wash the device or immerse it in
water or any other liquids.

10
Specifications
Weight Capacity: 11 lb / 5 kg
Units: lb:oz / fl’oz. / g / ml
Division Value: 0.1 oz / 1 g
Auto-Off: 120 seconds
Power: 2 x 1.5V AAA batteries
Dimensions: 8.5” x 7.3” x 0.6” (217mm x 187mm x 16mm)