ETEKCITY ESF38 User manual

Smart Fitness Scale
Model: ESF38
User Manual
Questions or Concerns?
Mon–Fri, 9:00 am–5:00 pm PST/PDT
[e-mail] • [phone]

2
Table of Contents
Package Contents
Specifications
Safety Information
Function Diagram
Digital Display
VeSync App Setup
Before First Use
Using the Smart Scale
Maintenance
• Calibrating the Smart Scale
• Cleaning the Smart Scale
• Replacing the Batteries
Display Messages
Troubleshooting
FCC Statement
Warranty Information
Customer Support
3
3
4
6
7
8
9
10
11
11
11
12
13
14
16
17
19

3
Package Contents
Specifications
1 x Smart Fitness Scale
1 x Measuring Tape
3 x 1.5V AAA Batteries (Pre-Installed)
1 x Quick Start Guide
Weight Capacity 400 lb / 28 st / 180 kg
Increments 0.1 lb / 0.05 kg
Weight Units lb / st / kg
Platform Tempered glass
Dimensions 11 x 11 x 1 in / 28 x 28 x 2.5 cm
Battery Type 3 x 1.5V AAA batteries
Auto-Off 30 seconds

4
Please read and follow all instructions and
safety guidelines in this manual.
Safety Information
Medical
General Use
• This scale should not be used to diagnose or treat any medical condition.
• Scale data should not be used as a substitute for medical advice from a
healthcare professional.
• This scale uses a harmless electrical current to measure body fat. Consult a
healthcare professional before using the smart scale if you use medical electronic
equipment such as a pacemaker.
• Check the scale before using. Do not use the scale if it is damaged in any way.
• Do not strike or hit the scale. Do not use the scale if the glass is cracked or
broken. Due to the nature of tempered glass, the glass will shatter if there is even
a slight crack. If you see a crack, contact Customer Support immediately
(page 19).
• The glass platform is slippery when wet. Always make sure the platform and your
feet are dry before stepping on for measurement.
• Place the scale on a hard, flat surface for accurate measurements and to avoid
tipping.
• To weigh safely and accurately, stand with your feet shoulder-width apart while
on the scale. Do not stand on the edge of the scale or jump on the scale.
• Avoid standing on the scale for a long period of time, or when not weighing
yourself.
• Do not overload the scale. Maximum weight capacity is 400 lb / 28 st / 180 kg.
• Keep the scale in a cool area with low humidity. Keep the scale away from heat
sources, such as ovens or heaters. Avoid temperature fluctuations. Store the
scale in a horizontal position, not a vertical position.
• Handle with care.
• Not for commercial use. Household use only.

5
Batteries
• Do not mix new and old batteries.
• If the low battery indicator (“ “) appears on the display, replace the batteries.
• If the scale is not in use for a long period of time, remove the batteries to extend
the lifetime of the scale.
SAVE THESE INSTRUCTIONS

6
Function Diagram
A. Display
B. Weighing Platform
C. Anti-Skid Padding
D. Battery Compartment
A
B
C
D

7
Kg st lb
Digital Display
A. Weight Measurement
B. Wireless Connection Icon
C. Weight Units
BC
A

8
VeSync App Setup
Note:Due to app updates and improvements, the contents of this manual
may change without notice. The VeSync app user interface may appear
slightly different.
1. To download the VeSync app, scan the QR code or search “VeSync” in
the Apple App Store®or Google Play Store.
2. Open the VeSync app. If you already have an account, tap Log In. To
create a new account, tap Sign Up.
3. Make sure your phone has Bluetooth®turned on.
4. Follow the in-app instructions to add your smart scale.
Note:
• This smart scale uses the VeSync app, not the VeSyncFit app.
• For Android™ users, you may need to select “Allow” to use VeSync.

9
Before First Use
1. Open the battery compartment on the underside of the scale. Remove
the included AAA batteries.
2. Remove the plastic insulator strip from the battery compartment.
3. Replace the batteries (see Replacing the Batteries, page 12).
Follow the guidelines in the battery compartment to match the
+ and – terminals.
Creating a User
If you are a new user, you will need to enter physical information before
weighing yourself for the first time so the scale can calculate your body
metrics. Follow the in-app instructions to add a user.
Note:
• Entering inaccurate information will make the scale’s measurements
less accurate.
• If you don’t identify with the available gender options, or are unsure,
pick the choice that you think best physically matches you. This choice
is used for physical measurements, such as body fat percentages.

10
Using the Smart Scale
1. Place the scale on a hard, flat surface. [Figure 1.1]
Note:
• To switch between pounds (lb), stone (st), and kilograms (kg), select
the weight unit in the Device Settings menu in the VeSync app.
• If you are pregnant, scale measurements will not be accurate.
Note: Placing on carpet may cause inaccurate measurements or tipping.
Figure 1.1
Figure 1.2
2. Make sure your feet are dry. Place bare feet on the scale’s conductive
areas. The scale will automatically turn on and start measuring
your weight.
3. Continue standing on the scale until the digits on the screen flash 3
times, showing your final measurement. If you’ve set up your smart
scale in the VeSync app, additional results (such as BMI, body fat, etc)
will show on the app. [Figure 1.2]