ETEKCITY Luminary EKS-L221-SEU User manual

1
Luminary™ Kitchen Scale
Model: EKS-L221-SEU
User Manual
Questions or Concerns?
[e-mail]

2
Thank you for purchasing the
Luminary™ Kitchen Scale by Etekcity.
If you have any questions or concerns, please reach out to our
helpful Customer Support Team at [e-mail].
We hope you enjoy your new kitchen scale!

3
Package Contents
Specications
Important Safety Information
Function Diagram
Display Diagram
Using Your Scale
Troubleshooting
Warranty Information
Customer Support
Table of Contents
Package Contents
1 x Luminary™ Kitchen Scale
1 x USB Charging Cable
1 x Quick Start Guide
3
4
5
7
8
9
12
14
15

4
Specifications
Weight Capacity 10 kg / 10000 mL / 353 oz / 22 lb
Units g / mL (water/milk) / ’oz (water/milk) /
oz / lb:oz
Increments 1 g / 0.05 oz
Auto-Off 180 seconds
Battery 300mAh Li-ion Battery
Input 5.0V 500mA (USB Type-C Charging)
Dimensions 230 x 170 x 27 mm / 9.1 x 6.7 x 1.1 in

5
Scale
Important Safety Information
• Do not exceed the 10 kg / 22 lb weight capacity, as it will damage
the scale. An error indicator will appear on the LED display if the
limit is exceeded.
• The scale is IPX6 water resistant, which means it can withstand
most liquid spills without permanent damage. However, we still
recommend wiping the scale dry with a soft cloth after any spills
to keep it in optimal condition.
• Handle with care. This scale is not intended for commercial or
heavy-duty use.
• Keep the scale in a cool, dry place. Avoid exposure to damp
environments or extreme temperatures.
• Household use only.
To avoid damage to this scale, please read and follow all
instructions and safety guidelines in this manual.
READ AND SAVE THESE INSTRUCTIONS

6
Batteries
• The display will show “LO” when the battery needs to be charged.
• Insert the USB charging cable into the USB charging socket.
• Plug the USB charging cable into a DC 5V adapter and plug into an
outlet. You can also plug the cable into a powered USB outlet.
• When charging, the on the display will light up.

7
Function Diagram
A. LED Display
B. Unit Selection Button
C. Power/Zero Button
D. Locking Key (Hold Button)
E. USB Charging Port
F. Anti-Skid Pads
BF
E
CD
A
Top Bottom

8
Display Diagram
A. Battery Charging Indicator
B. Milk
C. Water (Liquid)
D. Tare Indicator
E. Weight Value
F. Measurement Unit
G. Hold Indicator
A
B
C
D
G
F
E

9
Using Your Scale
General Operation
1. Place the scale on a hard, at surface.
2. Tap to turn on the scale. Make sure the display reads
“0.00”.
3. Tap UNIT to select your desired measuring unit, which will
show on the right of the display.
4. Place your item on the scale.
5. Wait for the reading on the display to stabilise.
6. When you’re done, reset the scale by removing all items from
the scale. If the display doesn’t read “0.00”, press to
reset the weight to zero.
Note:
• For accurate results, always place the scale on a hard, at surface, and
keep the scale away from dirt, dust, vibrations, wind, air currents, and
electromagnetic interference.
• When you turn on the scale, choose units, or use the tare function, wait
for the display to read “0.00” before measuring.

10
1. Tap to turn on the scale. Make sure the display reads
“0.00”. If the screen does not display “0.00” automatically, tap
to adjust to zero.
2. Place the container on the centre of the scale.
3. Wait for the reading on the display to stabilise. The display will
show the container’s weight.
4. Tap to tare the weight of the container. The screen will
now display “0.00”.
5. Place the liquid or items into the container. The scale will
measure the contents without including the weight of the
container.
6. When you’re done, reset the scale by removing all weight and
tapping again.
Whenever you measure items inside a container, you can use
the tare function to remove the container’s weight from the nal
measurement.
Zero / Tare Function