TAKT T18 Arc Instruction Manual

T18 Arc
Dining Table
Extension Leaf
Building Instructions

Important Notice
Only use the listed tools.
Do not use power tools.
Tighten in accordance with
the building instructions.
Avoid over-tightening.
There is no need for
strong force.
1x extension leaf
2x aprons

1x extension leaf
2x aprons
A
B
4x wood dowels
6x screws (50mm)
1x Allen key (SW4)

Weight
narrow version:
6,6 kg
wide version:
11,4 kg
Product Information
The extension leaf is used
with ‘T18 Arc Dining Table’.
The table is designed for
indoor use and is tested
according to EN 15372 - L2.
Materials
Tabletop: Mdf with oak veneer or nano laminate
Aprons: Solid wood
Surface treatment: Water based lacquer
Fittings: Steel
Tests & Declarations
The table has passed the furniture test EN 15372 - L2
The table is not treated with or containing disinfective
biocides.

Dimensions
920 mm
500 mm
900 mm
900 mm

BA
6x6x4
A
B

7
Place the extension leaf on the table slides. Push the table ends
together. Make sure the pin and pin holes align.
1
2

8Turn the table locks under the tabletop to secure the table.

9
If the table is used with two 50 cm wide extension leaves, TAKT
recommened to mount the table with a support leg (sold separately).

Warranty
TAKT provides an ex-
tended warranty of 5
years on ‘T18 Arc Dining
Table’. The warranty
covers breakage of com-
ponents and damage
occurred because of
deficient craftsmanship
under normal use.
The warranty shall lapse
if the product shows
signs of inappropriate
use or other physical
damage. The warranty
does not cover wear or
damage to upholstery,
gliders, wheels, surfaces
and the like.
Maintenance
TAKT maintenance guide
is accessible on our web-
site
www.taktcph.com/
product-care/
Additional Information
TAKT provides an extended
warranty of 5 years on
‘T18 Arc Dining Table’.
Spare Parts
TAKT offers spare parts
for ‘T18 Arc Dining Table’.
Spare parts are avail-
able from TAKT without
charge for a period of 5
years from the date of
purchase if the parts are
found to be faulty during
normal use. If the parts
are damaged by mis-
use spare parts can be
bought from TAKT.
TAKT always strives to
deliver spare parts to you
in the fastest and most
efficient way in order for
your furniture to return to
a functional condition.
Please contact TAKT
for inquiries regarding
spare parts.
Recycling & Disassembly
We hope that your TAKT
product will serve you
well for many, many
years.
If you at one point want
to recycle it, please sep-
arate it into components
for sorting.
Untighten screws by
turning the Allen key
counter clockwise to
separate the different
parts.
Metal parts parts can be
delivered to a suitable
recycling facility and be
recycled.
Wooden parts can be
delivered to a suitable
recycling facility and
be recycled or used for
energy recovery through
incineration.
[e-mail]

6x screws 50mm (metal)
4x wood dowels (wood) 1x extension leaf (wood)
2x aprons (wood)
2x table locks (plast)
8x screws (metal)

taktcph.com