evertz MIO-CCE-4K/3G User manual

MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder
with Media–to–IP Streaming
User Manual
© Copyright 2021
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone: [phone]
Sales: [e-mail] Fax: [phone]
Tech Support: [e-mail] Fax: [phone]
Web interface: http://www.evertz.com Twitter: @EvertzTV
Version 1.0, December 2021
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of
purchasers of the MIO–CCE–4K/3G series product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the
operation of the MIO–CCE–4K/3G series product. Due to on going research and development, features and specifications in this manual are subject
to change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of
this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Keep these instructions.
•Heed all warnings.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles
and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC –
SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
CISPR 32 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used.
EN62368-1:2014
Safety
EN504192 2005
Waste electrical products should not be
disposed of with household waste.
Contact your Local Authority for recycling
advice
EN55032:2012
Emission
EN55035:2017
Immunity

MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
Revision 1.0 Page - i
REVISION HISTORY
REVISION
DESCRIPTION
DATE
1.0
First Release
Dec 2021
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for
the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of
Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty offered
by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty is
granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order confirmation.
Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you encounter an error,
please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in equipment design or
specifications.

MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
Page - ii Revision 1.0
This page left intentionally blank

MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
Revision 1.0 Page - iii
TABLE OF CONTENTS
1. OVERVIEW ...................................................................................................................................1
1.1. FEATURES & BENEFITS.....................................................................................................1
1.2. HOW TO USE THIS MANUAL..............................................................................................2
2. INSTALLATION.............................................................................................................................3
2.1. REAR PANEL.......................................................................................................................3
2.1.1. Program Video Inputs (12G/3G/HD/SDI Input1-4)......................................................3
2.1.2. Program Video Outputs (12G/3G/HD/SDI OUT 1-4) ..................................................3
3. TECHNICAL SPECIFICATIONS ...................................................................................................5
3.1. ELECTRICAL INPUTS..........................................................................................................5
3.2. ELECTRICAL OUTPUTS......................................................................................................5
3.3. PHYSICAL ............................................................................................................................5
3.4. ORDERING INFORMATION.................................................................................................6
3.4.1. Ordering Options: ......................................................................................................6
3.4.2. Enclosures.................................................................................................................6
4. WEBEASY®CONFIGURATION ....................................................................................................7
4.2. SYSTEM ...............................................................................................................................9
4.2.1. Firmware Info.............................................................................................................9
4.2.2. Board Info ..................................................................................................................9
4.2.3. Node Info...................................................................................................................9
4.3. NETWORK MANAGEMENT ...............................................................................................10
4.3.1. Network Configuration .............................................................................................10
4.3.2. Magnum In-Band Control.........................................................................................10
4.3.3. SNMP Trap Servers.................................................................................................11
4.4. TIMING ...............................................................................................................................11
4.4.1. External Genlock Faults...........................................................................................11
4.4.2. Genlock Input Status ...............................................................................................11
4.5. VIDEO IO ............................................................................................................................12
4.5.1. Input Video Controls ................................................................................................12
4.5.2. Output Video Controls..............................................................................................13
4.5.3. Video Status ............................................................................................................13
4.5.4. Video Faults.............................................................................................................13
4.6. IP ........................................................................................................................................14
4.7. IP INPUT.............................................................................................................................15
4.7.1. Video (S2110-20) IP Input (not used at time of writing) ............................................15
4.7.2. ANC (S2110-40) IP Input (not used at time of writing)..............................................16
4.7.3. Mio-cce-aux-io IP Input ............................................................................................16
4.8. IP OUTPUT .........................................................................................................................17
4.8.1. Video (S2110-20) IP Output (not used at time of writing) .........................................17
4.8.2. ANC (S2110-40) IP Output (not used at time of writing)...........................................17

MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
Page - iv Revision 1.0
4.8.3. MIO-CCE-AUX-IO IP Output....................................................................................18
4.9. ANC ....................................................................................................................................18
4.10. TIME CODE. (+ETC OPTION ONLY) .................................................................................19
4.10.1. Time Code Controls.................................................................................................19
4.10.2. Time Code Outputs..................................................................................................19
4.10.3. System & PTP Time Code Controls.........................................................................20
4.11. WST TELETEXT.................................................................................................................21
4.11.1. WST Input Control ...................................................................................................22
4.11.2. SDP Input Control....................................................................................................22
4.11.3. WST Output Control ................................................................................................22
4.11.4.SDP Output Control .................................................................................................23
4.12. NAMEDROPPER (+NDE OPTION ONLY)..........................................................................23
4.12.1. Packet Configuration ...............................................................................................23
4.13.COMMUNICATION PORTS................................................................................................25
4.13.1. Port Status...............................................................................................................26
4.13.2. Port Status...............................................................................................................27
4.13.3. TCP Control.............................................................................................................28
4.14. CC SETUP..........................................................................................................................29
4.14.1. CC Setup Control.....................................................................................................30
4.14.1.1. SD CEA-608 F1 and F2 Keyers.................................................................30
4.14.1.2. VANC Keyer..............................................................................................30
4.14.1.3. Caption Erase Timer .................................................................................30
4.14.1.4. SD CEA-608 Waveform Line.....................................................................30
4.14.1.5. SD CEA-608 Waveform Setup Shift ..........................................................30
4.14.2. Caption Shift Control................................................................................................30
4.14.2.1. Caption Shift Up GPI .................................................................................30
4.14.2.2. Caption Shift Up Lines...............................................................................31
4.14.3. Test Message Enable ..............................................................................................31
4.14.3.1. CEA-608 Test Msg ....................................................................................31
4.14.3.2. CEA-708 Test Msg ....................................................................................31
4.14.4.Service Missing .......................................................................................................31
4.14.5. CC Misc System Control..........................................................................................31
4.14.5.1. DST In Effect.............................................................................................31
4.14.5.2. DST Observed ..........................................................................................31
4.14.5.3. Timezone ..................................................................................................31
4.15. UPSTREAM CAPTIONS.....................................................................................................32
4.15.1. USC Setup ..............................................................................................................32
4.15.2. Upstream CEA 608..................................................................................................33
4.15.3. Stream Monitor ........................................................................................................33
4.15.4. Upstream CEA 708..................................................................................................33
4.15.5. Stream Monitor ........................................................................................................33
4.16. CDP ....................................................................................................................................34
4.16.1. CDP Setup ..............................................................................................................34
4.16.2. Fault Severity...........................................................................................................35
4.17. TRANSLATOR ...................................................................................................................35
4.17.1. 608 to 708 ...............................................................................................................35
4.17.2. Service Mapping......................................................................................................35

MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
Revision 1.0 Page - v
4.18. OSD AND MONITORING....................................................................................................36
4.18.1. OSD.........................................................................................................................36
4.19. AUDIO STREAMING (+AUDIO OPTION ONLY) ................................................................38
4.19.1. Audio Setup .............................................................................................................38
4.19.2. RTP Setup ...............................................................................................................39
4.20. EXPORT CC FILES ............................................................................................................40
4.20.1. Monitor ....................................................................................................................41
4.20.2. CEA 608 ..................................................................................................................41
4.20.3. Procap .....................................................................................................................41
4.20.4. CDP.........................................................................................................................41
4.20.5. SCC.........................................................................................................................41
4.20.6. Serial and TCP Ports ...............................................................................................41
4.20.7. Control.....................................................................................................................42
4.21. IMPORT CC FILES .............................................................................................................42
4.21.1. Import CC Files........................................................................................................42
4.22. FACILITY SERVER (NOT AVAILABLE AT TIME OF WRITING) .......................................43
4.22.1. Facility Server Configuration....................................................................................43
4.22.2. Facility Server Job ...................................................................................................44
4.22.3. System Notify ..........................................................................................................44
4.23. INPUT NOTIFY ...................................................................................................................45
4.23.1. SDI Input Video Notification .....................................................................................45
4.23.2. IP Input Video Notification........................................................................................46
4.23.3. ANC IP Input Notifications .......................................................................................46
4.24. CC NOTIFY.........................................................................................................................47
4.24.1. CC Notify .................................................................................................................47
4.25. LICENSE MANAGEMENT ..................................................................................................48
4.25.1. Product Features .....................................................................................................48
5. SERIAL COMMAND PROTOCOL...............................................................................................49
5.1. COMMAND QUICK REFERENCE ......................................................................................49
5.2. COMMAND SYNTAX DESCRIPTION.................................................................................50
5.2.1. Special Characters ..................................................................................................50
5.2.2. Parameters ..............................................................................................................50
5.2.3. Flow Control Handshaking.......................................................................................53
5.2.4. Break Handling ........................................................................................................53
5.2.5. Command Responses .............................................................................................53
5.3. COMMON COMMANDS .....................................................................................................53
5.3.1. Set Baud Rate .........................................................................................................53
5.3.2. Reset Encoder.........................................................................................................54
5.3.3. Set Output Line........................................................................................................54
5.3.4. Monitoring Line 21 Data on the Serial Port...............................................................55
5.3.5. Controlling the Caption Decoder ..............................................................................55
5.3.6. Report Firmware Version .........................................................................................56
5.3.7. Command Help........................................................................................................56
5.3.8. Report Bypass Switch Mode....................................................................................56
5.3.9. Report Battery Status...............................................................................................56
5.3.10. Set / Report Time of Day Clock................................................................................56

MIO–CCE–4K/3G
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming
Page - vi Revision 1.0
5.3.11. Set / Report Calendar Date......................................................................................58
5.3.12. Transparent State....................................................................................................58
5.3.13. Null State.................................................................................................................59
5.3.14. Direct Control State .................................................................................................59
5.3.15. Real Time State.......................................................................................................60
5.3.16. Display System Status.............................................................................................61
5.4. TEXT ARTICLES ................................................................................................................61
5.4.1. Input Article..............................................................................................................61
5.4.2. Output Article...........................................................................................................62
5.4.3. Delete Article ...........................................................................................................63
5.4.4. Queue Articles .........................................................................................................63
5.4.5. Display Article Status...............................................................................................64
5.4.6. Display Output Queue .............................................................................................64
5.5. EXTENDED DATA SERVICES...........................................................................................65
5.5.1. Input XDS ................................................................................................................65
5.5.2. Blocking Upstream XDS Packets.............................................................................66
5.5.3. Queue XDS Packets................................................................................................67
5.5.4. Delete XDS Packet ..................................................................................................67
5.5.5. Inserting XDS Articles into Non-Volatile Memory .....................................................67
5.6. COMM PORT CONTROL COMMANDS .............................................................................67
5.6.1. Show Port Permission Maps....................................................................................68
5.6.2. Alter Port Permission Maps .....................................................................................68
5.6.3. Show Port Active Maps............................................................................................69
5.6.4. Alter Port Active Maps .............................................................................................69
5.6.5. Reset Port ...............................................................................................................70
6. UPGRADE PROCEDURES.........................................................................................................71
6.1. FIRMWARE UPGRADE......................................................................................................71
7. TROUBLESHOOTING ................................................................................................................73
7.1. ANSWERS TO FREQUENTLY ASKED QUESTIONS........................................................73
7.1.1. Which Serial Port Should I Connect To?..................................................................73
7.1.2. There is No SDI Video Present on the SDI Output...................................................73
7.1.3. How Do I Check if Captions are Being Processed? .................................................73
7.1.3.1. Control A Protocol Test Using a Terminal Program ...................................73
7.1.4. There are No Captions Present Out of the ATSC Encoder ......................................74
7.1.5. What Baud Rate and Port Settings Should I Use? ...................................................75
7.1.6. Captions are Not Being Encoded At All....................................................................75
7.1.7. Captions are Not Being Encoded Correctly..............................................................75
7.1.8. How Can I Block Upstream Captions? .....................................................................76
7.1.9. How Can I Pass Upstream Captions?......................................................................76
7.1.10. My Modem Connection Hangs-Up Unexpectedly.....................................................76
7.2. BEFORE YOU CALL EVERTZ TECHNICAL SUPPORT....................................................77