Evonicfires Banff R User manual

1
SUITES & STOVESSUITES & STOVES
INSTRUCTION MANUALINSTRUCTION MANUAL
Compton 2Compton 2
Compton 1000Compton 1000
Empire 2Empire 2
Gilmour 6Gilmour 6
Gilmour 7Gilmour 7
Gilmour 10Gilmour 10
HaldenHalden
BergenBergen
HalmstadHalmstad
MidoriMidori
TuvaTuva
Canto 200Canto 200
Locanda 175Locanda 175
Espire 150Espire 150
Rivera 200Rivera 200
Rivera 175Rivera 175
Rivera 150Rivera 150
Rivera 125Rivera 125
MuranoMurano
MiradaMirada
ImperiumImperium
CrenshawCrenshaw
InglewoodInglewood
EllipseEllipse
C600C600
BanffBanff
Banff RBanff R
EnglishEnglish
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

2
CONTENTS
EU Directives and UKCA Standards......................................................................3
Important Information and Health & Safety........................................................... 4
Components for Suites and Stoves....................................................................... 5
Installation........................................................................................................... 6
Model Dimensions...................................................................................... 7
Installation (Wall Mounted Suites)............................................................... 8
Installation (Suites with Risers and Stoves).................................................11Installation (Suites with Risers and Stoves).................................................11
Installation (Floor-based)............................................................................13Installation (Floor-based)............................................................................13
Installation (Cassette style).........................................................................15Installation (Cassette style).........................................................................15
Log Layouts......................................................................................................... 19
Front & Side Glass Installation..............................................................................22Front & Side Glass Installation..............................................................................22
Troubleshooting, Warranty & Registration............................................................ 27
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18
Glass & Screens
Vermiculite
Log fuel effects
Electrical components -
Fans, heater elements,
PCB’s, Power pack’s,
LED’s
Metal -
Steel or cast iron
Can be taken to a local recycling centre for reuse to reduce waste going to landfill
Can be taken to a local recycling centre for reuse to reduce waste going to landfill.
Non hazardous material. Vermiculite can be crushed up and used for plant bedding and ash used for
composting or disposed of at a local recycling centre for reuse to reduce waste going to landfill.
Dispose at a local recycling centre In accordance with latest WEEE directive.
These logs contain refractory ceramic fibre materials which requires disposal in accordance with
WEEE legislation.
Natural Wood Can be taken to a local recycling centre for reuse to reduce waste going to landfill
The following materials and components should be disposed of in accordance with the
below table.

3
All Evonic Fires products are in conformity with the relevant UK Statutory InstrumentsAll Evonic Fires products are in conformity with the relevant UK Statutory Instruments
(and their amendments).(and their amendments).
2016 No. 1101 The Electrical Equipment (Safety) Regulations 20162016 No. 1101 The Electrical Equipment (Safety) Regulations 2016
2016 No. 1091 The Electromagnetic Compatibility Regulations 20162016 No. 1091 The Electromagnetic Compatibility Regulations 2016
2012 No. 3032 The Restriction Of Use Of Certain Hazardous Substances In2012 No. 3032 The Restriction Of Use Of Certain Hazardous Substances In
Electrical And Electronic Equipment Regulations 2012Electrical And Electronic Equipment Regulations 2012
EU DIRECTIVES
All Evonic Fires products meet the requirements of the EC Directives.All Evonic Fires products meet the requirements of the EC Directives.
These directives have been met by compliance with the following standards:These directives have been met by compliance with the following standards:
EU 2011-65/EU 2015/863 Restriction of Hazardous Substances.EU 2011-65/EU 2015/863 Restriction of Hazardous Substances.
References to the relevant designated standards used:References to the relevant designated standards used:
EN 55014-1:2006 + A1:2009 + A2:2011 Electromagnetic Compatibility.EN 55014-1:2006 + A1:2009 + A2:2011 Electromagnetic Compatibility.
EN 55014-2:2015 Electromagnetic Compatibility.EN 55014-2:2015 Electromagnetic Compatibility.
EN 61000-3-2:2014 Electromagnetic Compatibility (EMC). Limits. Limits forEN 61000-3-2:2014 Electromagnetic Compatibility (EMC). Limits. Limits for
Harmonic Current Emissions.Harmonic Current Emissions.
EN 61000-3-3:2013 Electromagnetic Compatibility (EMC). Limits. Limitation ofEN 61000-3-3:2013 Electromagnetic Compatibility (EMC). Limits. Limitation of
Voltage Changes, Voltage Fluctuations and Flicker.Voltage Changes, Voltage Fluctuations and Flicker.
EN 60335-1:2012 + A11:2014 Household and similar electrical appliances - SafetyEN 60335-1:2012 + A11:2014 Household and similar electrical appliances - Safety
EN 60335-2-30:2009+A11:2012 Household and similar electrical appliances. Safety.EN 60335-2-30:2009+A11:2012 Household and similar electrical appliances. Safety.
Particular requirements for room heatersParticular requirements for room heaters
UKCA STANDARDS
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

IMPORTANT INFORMATION AND HEALTH & SAFETY
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electric shock, and injury to persons, including the following:
• Read all of the instructions carefully before using the appliance, only use this appliance
as described in this manual. Any other use not recommended by the manufacturer mayAny other use not recommended by the manufacturer may
cause injury to persons, or damage to the appliance.cause injury to persons, or damage to the appliance.
• Remove all packaging and dispose of it at an appropriate recycling facility.
•• When transporting or storing the appliance and power lead, keep in a dry place, awayWhen transporting or storing the appliance and power lead, keep in a dry place, away
from excessive vibration and store so as to avoid damage.from excessive vibration and store so as to avoid damage.
• This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. The trim around the heater outlet becomes hot during heater operation.
DANGER: High temperatures may be generated under certain abnormal conditions.
• Do not install this appliance immediately in front of a fixed socket outlet.
• Do not install this appliance in the immediate surroundings of a bath, shower,
swimming pool or any other area where the appliance could come into contact with
water or humidity, e.g. a bathroom.
•• Do not use in areas where gasoline, paint, or any flammable liquids are used or stored.Do not use in areas where gasoline, paint, or any flammable liquids are used or stored.
• This appliance is only suitable for indoor use, do not use outdoors.
• Do not cover the appliance, or let the air inlet/outlet to be obstructed in any way as it
may overheat.
• Keep the power lead away from hot surfaces and the heater outlet. Do not route the
power lead in front of the appliance, or under any carpets or rugs. Do not allow the
power lead to be coiled up once installed, as this can cause overheating.
• This appliance must be firmly fixed to a flat internal wall.
• A maintenance hatch must be installed into the surrounding installation to allow future
access.
• Always use a certified electrician should new circuits or outlets be required. And
always use properly grounded, fused and polarised outlets.
• Where the power lead passes through any masonry wall, stone surround etc. ensure
that suitable rubber bushes are fitted at any possible wear points.
• If the power lead is damaged do not use the appliance until it has been replaced.
• Do not use any external switching device, timers, or extension leads. Do not connect
the appliance to a circuit that is frequently switched on and off by the utility.
•• In the event of a malfunction, switch off the appliance, and disconnect it from theIn the event of a malfunction, switch off the appliance, and disconnect it from the
mains power supply. Have the appliance inspected by a certified electrician beforemains power supply. Have the appliance inspected by a certified electrician before
reusing.reusing.
• Do not use the appliance if it is damaged. In the event of any damage to the appliance,
please contact the retailer from whom the appliance was purchased.
• Any repairs must only be performed by a certified electrician.
• Extreme caution is necessary when any heater is used by, located near children or
people of reduced mobility, and whenever the unit is left operating and unattended.
• Young children should be supervised to ensure that they do not play with the appliance.
•• Disconnect from the power supply before performing any cleaning, maintenance orDisconnect from the power supply before performing any cleaning, maintenance or
relocation of the unit. Do not use steam cleaners, or aerosols near the appliance.relocation of the unit. Do not use steam cleaners, or aerosols near the appliance.
• Do not burn wood or anything else in this appliance.
• Do not strike the glass. The glass used is toughened safety glass, if broken it will
shatter into small chunks which are less likely to cause injury.
• Do not drill or screw any new holes into the appliance.
4EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

INSTALLATIONINSTALLATION
5
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

MODEL DIMENSIONS
Model Width Height Depth
Overall unit
(A)
Overall unit
(B)
With Riser /
Bench (C)
Opening
(D)
Overall unit
(E)
Banff/Banff R 460mm 670mm 310mm 355mm
Bergen 1475mm 615mm 355mm 357mm
Compton 2 1120mm 514mm 274mm 310mm
Compton 1000 1500mm 511mm 261mm 355mm
Empire 2 1120mm 512mm 272mm 270mm
Gilmour 6 1120mm 712mm 992mm 455mm 276mm
Gilmour 7 1120mm 538mm 818mm 285mm 276mm
Gilmour 10 1475mm 531mm 811mm 277mm 276mm
Halden 488mm 1015mm 495mm 416mm
Halmstad 863mm 832mm 460mm 331mm
Midori 527mm 625mm 455mm 280mm
Tuva 493mm 1014mm 540mm 342mm
Canto 200 1982mm 529mm 356mm 275mm
Locanda 175 1726mm 529mm 355mm 275mm
Espire 150 1473mm 529mm 278mm 275mm
Rivera 200 2006mm 641mm 356mm 235mm
Rivera 175 1752mm 641mm 355mm 235mm
Rivera 150 1500mm 641mm 278mm 235mm
Rivera 125 1245mm 1010mm 752mm 260mm
Murano 1346mm 1150mm 682mm 381mm
Mirada 1460mm 815mm 355mm 280mm
Imperium 1120mm 512mm 272mm 270mm
Crenshaw 1500mm 511mm 261mm 355mm
Inglewood 1120mm 514mm 274mm 310mm
Ellipse 1473mm 529mm 278mm 300mm
C600 - 3 693mm 546mm 320mm 300mm
C600 - 4 693mm 579mm 320mm 300mm
6EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

INSTALLATIONINSTALLATION
Wall Mounted SuitesWall Mounted Suites
Compton 2Compton 2
Compton 1000Compton 1000
Empire 2Empire 2
Gilmour 6Gilmour 6
Gilmour 7Gilmour 7
Gilmour 10Gilmour 10
BergenBergen
MidoriMidori
Canto 200Canto 200
Locanda 175Locanda 175
Espire 150Espire 150
Rivera 200Rivera 200
Rivera 175Rivera 175
Rivera 150Rivera 150
ImperiumImperium
CrenshawCrenshaw
InglewoodInglewood
EllipseEllipse
7
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

Before installing the appliance please read and take into account the following important
requirements;
• The appliance must never be installed in front of an electrical socket.
• The appliance must not be installed anywhere that it may come into contact with water,
i.e. a bathroom.
• The minimum height above the finished floor level is 300mm.
INSTALLATION REQUIREMENTS
INSTALLATION
CHECKS BEFORE INSTALLATION
We recommend turning on the appliance before installation, connect the appliance to a
power source using the provided electrical lead, and depress the right side of the rocker
switch.
8EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

TOOLS REQUIRED
• Tape Measure
• Pencil
• Spirit Level
• Screwdriver
• PZ2 Screw Bit
The appliance is supplied with a wall bracket, shown above.
INSTALLATION STEPS
• Drill Bit
• Wall Plugs (Masonry type supplied)
• Wall Screws (Masonry type supplied)
• Stud Detector (For plasterboard
installations only)
• Wall Anchors (For plasterboard
installations only. Not supplied)
1Remove the two bottom mounted transit brackets, you won’t need these for
installation. Then screw on the IEC Clip to the bottom back of the case, with
the two provided screws.
9
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

2
Determine the finished height and position that you want the appliance to be
located. Then secure the wall bracket to the wall in the position you need using
the wall plugs and screws provided. If you’re not securing the appliance to a
masonry wall you will need to use the appropriate fixings.
3You can now hang the appliance on the wall by slotting the tabs of the wall
bracket into the slots on the back of the appliance. Connect the appliance to
the mains power supply and it is ready to use.
10 EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

INSTALLATIONINSTALLATION
Suites with Risers & StovesSuites with Risers & Stoves
BanffBanff
Banff RBanff R
Gilmour 6Gilmour 6
Gilmour 7Gilmour 7
Gilmour 10Gilmour 10
HaldenHalden
HalmstadHalmstad
TuvaTuva
11
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

Before positioning the appliance please read and take into account the following
important requirements;
• The appliance must not be located anywhere that it may come into contact with water,
i.e. a bathroom.
• This appliance is only suitable for indoor use, do not use outdoors.
• Keep the power lead away from hot surfaces and hot conditions, including the heater
outlet.
• Do not route the power lead under any carpets or rugs.
Once you have taken the above requirements into consideration you can plug in your
appliance, and switch on the rocker switch.
For most models the power inlet is located at the back right, and the rocker switch is
located at the front top right. Some models differ, and are shown below;
INSTALLATION REQUIREMENTS
INSTALLATION
12 EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

INSTALLATIONINSTALLATION
Floor-basedFloor-based
HaldenHalden
HalmstadHalmstad
TuvaTuva
Rivera 125Rivera 125
MuranoMurano
MiradaMirada
13
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

Before positioning the appliance please read and take into account the following
important requirements;
• The appliance must not be located anywhere that it may come into contact with water,
i.e. a bathroom.
• This appliance is only suitable for indoor use, do not use outdoors.
• Keep the power lead away from hot surfaces and hot conditions, including the heater
outlet.
• Do not route the power lead under any carpets or rugs.
Once you have taken the above requirements into consideration you can plug in your
appliance, and switch on the rocker switch.
INSTALLATION REQUIREMENTS
INSTALLATION
The woodwork for the floor based models will screw directly to the appliance as shown
below, in four locations x2 fixing points at the top and x2 fixing points at the bottom.
14 EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

15
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18
INSTALLATIONINSTALLATION
Cassette styleCassette style
C600C600

16
Before installing the appliance please read and take into account the following important
requirements;
• Consult a qualified professional to check the structure of the installation site.
• This appliance has been designed to be installed into either a stud and plasterboard
wall, or an existing chimney breast.
• If installing into an existing chimney, make sure to adequately block off the flue.
• The appliance must never be installed immediately in front of an electrical socket.
• The appliance must not be installed anywhere that it may come into contact with water,
i.e. a bathroom.
INSTALLATION REQUIREMENTS
INSTALLATION
TOOLS REQUIRED
• Tape Measure
• Pencil
• Spirit Level
CHECKS BEFORE INSTALLATION
We recommend turning on the appliance before installation, connect the appliance to a
power source using the provided electrical lead, and press the right side of the rocker
switch.
• Screwdriver
• PZ2 Screw Bit
• Screws (Supplied)
Power Inlet
On/Off Switch
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

17
1
INSTALLATION STEPS
Once you have slid the appliance into place, you can then go about securing it
in position by screwing it into the studwork frame. There are 4 holes located in
each corner .
2
Once your studwork frame has been constructed, slide the appliance into the
prepared void.
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

18
Once you have secured the fire into place, adding the outer frame is the final
stage. The outer frame of the C600 comes with either a 3-sided or 4-sided
frame, which are both attached using the same method. The frame uses a a
combination of magnets and a push fit method. The frame will slide perfectly
into the front of the stove.
3
Above you will see suggested
positioning for the magnets, although
they can be positioned anywhere along
the plaster kit to provide extra support.
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

19
LOG LAYOUTSLOG LAYOUTS
Suites & StovesSuites & Stoves
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18

LOG LAYOUTS
When you have your appliance installed you can set up your log set/s. If your model
comes with Chippings, Glass Stones and/or Vermiculite lay this on the fuel bed first, then
continue with laying out your logs. There is no right or wrong way to arrange your logs, the
following images are an example of how you could lay them out.
1 x Small Woodland / Silver Birch / Banff /
Compton 2 / Empire 2 / Midori
1 x Tuva Log Set
Halden / Tuva / Halmstad
1 x Small Legacy Log Set / Gilmour 6 / Gilmour 7
1 x Large Legacy Log Set / Gilmour 10
20
C600 / Banff R - British Woodland Log Set
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 18S&S ISS. 18