Ezviz T3C User manual

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”).
This user manual (hereinafter referred to as “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make
any warranties, guarantees or representations, express or implied, regarding to the
Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest
version in the ™ website (http://www.ezvizlife.com).
Revision Record
New release – January, 2021
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of
EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the
properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED
“AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS,
OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF
THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE
PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR
PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE
TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN
AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C)
FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT
LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS,
AND AMONG OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE
ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND
DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO
ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL
NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE
PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE
LAW, THE LATTER PREVAILS.

Table of Contents
Overview ��������������������������������������������������������� 1
1� Package Contents ����������������������������������������������������������������������������1
2� Basics ����������������������������������������������������������������������������������������������1
Get the EZVIZ App ������������������������������������������� 2
Preparations���������������������������������������������������� 2
1� Remove Cover ����������������������������������������������������������������������������������2
2� Remove Insulation Strip �������������������������������������������������������������������2
Add Device ������������������������������������������������������ 3
1� Method One: Add by Scanning QR Code��������������������������������������������3
2� Method Two: Add by the Gateway �����������������������������������������������������3
Installation ������������������������������������������������������ 4
1� Put on the table ��������������������������������������������������������������������������������4
2� Stick at Where You Want ������������������������������������������������������������������4
Operations on the EZVIZ App ��������������������������� 5
1� Homepage����������������������������������������������������������������������������������������5
2� Settings��������������������������������������������������������������������������������������������5

1
Overview
1� Package Contents
Smart Button Double-sided Tape
Regulatory Information Quick Start Guide
2� Basics
Button
Cover Detaching Convex
Cover Detaching Groove
Antiskid Ring
Front Back
RESET
Button
Insulation Strip
Battery
LED Indicator
Name Description
Button Press the button once, twice or press and hold the button, the
custom operations or scenes on the app can be performed.
RESET Button Press and hold the RESET button for over 5s, the smart button will
restart and then enter device adding mode.
LED Indicator
• Fast-flashing Blue: Enters device adding mode.
• Fast-flashing Blue and then off: Added to the Gateway
successfully.
• Fast-flashing Blue and then off in 180 seconds: Failed to be
added to the gateway.

2
Get the EZVIZ App
1. Connect your mobile phone to Wi-Fi (suggested).
2. Download and install the EZVIZ app by searching for “EZVIZ” in the App Store
or Google PlayTM.
3. Launch the app and register an EZVIZ user account.
EZVIZ App
If you have already used the app, please make sure that it is the latest version. To find
out if an update is available, go to the app store and search for "EZVIZ".
Preparations
1� Remove Cover
Remove the cover of the smart button by turning the antiskid ring
counterclockwise as shown in the gure below.
2� Remove Insulation Strip
Remove the battery insulation strip as shown in the gure below.
Insulation Strip
• If you need to replace the battery, please purchase one CR2032 210mAh.
• When replacing batteries, please insert with the positive side facing up.
• Keep your hands dry and clean when touching the circuit board.

3
Add Device
The smart button should be used along with EZVIZ Zigbee Smart Gateway (afterinafter
referred to as "gateway"). Please add gateway to the EZVIZ Cloud by referring to the
gateway user manual, and then add the smart button to the gateway.
1� Method One: Add by Scanning QR Code
1. Log in to your account through EZVIZ app, tap the device adding icon and
then the QR code scanning interface will be displayed.
2. Scan the QR code on the user manual, and then add the sensor to the
gateway.
Scan QR Code
3. Add the smart button to the gateway by following the wizard on the app.
4. Align the cover detaching convex with the cover detaching groove as shown
in the gure below. Rotate the cover clockwise to tighten cover.
2� Method Two: Add by the Gateway
When adding device by the gateway, place the device as close to the gateway as possible.
1. Make the gateway enter device adding mode as instructed by the user
manual of the gateway
2. Press and hold the RESET button for over 5 seconds until the indicator on
the smart button turns fast-ashing blue, and the smart button enters adding
mode.
3. The smart button will be added to the gateway automatically.
4. Align the cover detaching convex with the cover detaching groove as shown
in the gure below. Rotate the cover clockwise to tighten the cover.

4
Installation
The smart button can be put on the table, or be sticked on where you want through the
double-sided tape on the cover of the smart button.
1� Put on the table
Fig� 1 Put on the table
2� Stick at Where You Want
Fig� 2 Stick at where you want

5
• Do not install the smart button on metal doors because metal will cause signal
attenuation. You can install it on walls beside metal doors.
• It is recommended that the distance between the smart button and gateway be less than
20m. If there are walls between them, the number of walls should be no more than 2.
• Before sticking the smart button, clean the dust on the surface first. Do not stick the smart
button on limewashed walls.
Operations on the EZVIZ App
The app interface may be different due to version update, and the interface of the app you
installed on your phone shall prevail.
1� Homepage
Launch the EZVIZ app, open the homepage of the related gateway, you can manage
your detector as needed on the page.
Log Detection log of the detector.
2� Settings
Parameter Description
Device Name Customize the name of your device.
Emergency Button When enabled, the device will switch to emergency call
mode and the original arm and disarm button will be
disabled.
Related Devices You can see the gateway connected to your detector.
Device Information You can see the device information here.
Share Share your device.
Delete Device Tap to delete the detector from EZVIZ cloud.
Other manuals for T3C
1
Table of contents
Other Ezviz Security System manuals