Factoryfurniture FLO bench Manual

Factory Furniture Ltd |The Stableyard |Coleshill |Swindon SN6 7PT |T [phone] |F [phone]
[email protected] |www.factoryfurniture.co.uk
We reserve the right to change specification without notice. © 2011 Factory Furniture Ltd
FLO bench
Operation & Maintenance Manual

Introduction
Design
Design, shop drawings and development by Factory Furniture Ltd
Manufacture
Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and dispatched ready
for installation. Replacement products or components thereof should be ordered direct from Factory Furniture Ltd
Copyright
The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd
General Specifications
Bench
Metric length 2300mm | width 900mm | height 550mm
Imperial length 7’ 6½” | width 2’ 11½” | height 1’ 9½”
Approx Weight 2400kg
Detailed Material & Finish Specifications
Bench
• Material -
Silver- grey or black granite with a bush hammered (rough) finish as standard
General Maintenance (Recommended Schedule & Guidelines)
Daily/Weekly/Monthly (or as adopted)
Visual checks of bench - check for superficial or physical damage.
Six Monthly
Full clean as detailed below
Specific Maintenance Details
Granite
Clean with a stiff brush once per year, especially in more exposed locations, in order to prevent a verdigris type build up on
the surface. Ideally, this should be completed in early spring.
Repairs
Heavy Damage
In the event of serious damage please contact Factory Furniture for detailed technical advice.
Reordering / Spares
There are no spare parts for this model of bench
AutoCAD Drawing List
FF1028 / 01 FLO BENCH OVERVIEW DRAWING
FF1028 / 02 FLO BENCH SETTING OUT DRAWING
Contacts
Factory Furniture Ltd, Tel [phone]
The Stableyard, Fax [phone]
Coleshill, Email [email protected]
Swindon. Web www.factoryfurniture.co.uk
Wiltshire SN6 7PT
U.K.
2FLO bench specification

     

                
               
          
                   
                
               
          
                   
   




       !             !
   " # $ % & ' & ( ) * + , - - ' . ( + $ ' / 0 ( / . 1 2
3 333 3 33 4
5 6 7 7 8 9 : ; < =
5 > ? @ A : @ B C D E F >
8 ; E G H > > E B I F : @ H B H B ? J =
KK7KK7
L > M E D D @ B C < ? @ B C
N F I I @ B C
O P Q R S T U V W
X Y Z V [ \ R W S Y
Installation Instructions
ALL INSTALLATION WORKS TO BE CARRIED OUT BY COMPETENT PERSONNEL - INSTALL AS
COMPLETE UNIT.
Surface fix
Flo Bench (surface fix only)
1. Install suitable foundation pad (see illustration) with top face at ground level and sling channels positioned as shown
2. Position bench in correct orientation with base centrally on foundation pad
3. Backfill channels after removal of the lifting slings
3FLO bench installation