Factoryfurniture SERPENTINE Manual

Factory Furniture Ltd |5 Pioneer Road |Faringdon |Oxfordshire SN7 7BU |T [phone]
[e-mail] |www.factoryfurniture.co.uk
We reserve the right to change specification without notice. © 2017 Factory Furniture Ltd
Operation & Maintenance Manual
SERPENTINE bench & stool - granite

Introduction
Design
Design, shop drawings and development by Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd.
General Specifications
Bench
Metric length 2200mm | width 500mm | height 450mm*
Imperial length 5’ 11” | width 1’ 7½” | height 1’ 5½”
* Not including +50mm below ground level for sub-surface fix option
Approx Weight 1297kg (1445kg sub-surface option)
Stool
Metric length 600mm | width 500mm | height 450mm*
Imperial length 1’ 11½” | width 1’ 7½” | height 1’ 5½”
* Not including +50mm below ground level for sub-surface fix option
Approx Weight 352kg (392kg sub-surface option)
Detailed Material & Finish Specifications
Bench & Stool
• Manufactured from silver/grey granite with a light bush hammered finish
General Maintenance (Recommended Schedule & Guidelines)
Daily/Weekly/Monthly (or as adopted)
Visual checks of bench / stool - check all items for superficial or physical damage.
Three Monthly
Clean all items as detailed below check all fixings are seated correctly
Specific Maintenance Details
Granite
Clean with a stiff brush once per year, especially in more exposed locations, in order to prevent a verdigris type
build up on the surface. Ideally, this should be completed in early spring.
Repairs
Heavy Damage
In the event of serious damage to any component, replacements should be ordered from Factory Furniture Ltd.
In this event (or if the product needs to be disassembled for any reason), please contact Factory Furniture for
detailed technical advice.
Reordering / Spares
There are no spare parts for this model of bench
AutoCAD Drawing List
FF1008 / 01 SERPENTINE (GRANITE) BENCH FABRICATION DRAWING
Contacts
Factory Furniture Ltd Tel [phone]
5 Pioneer Road Email [e-mail]
Faringdon, Oxon Web www.factoryfurniture.co.uk
SN7 7BU UK
2SERPENTINE (granite) specification

Installation Instructions
ALL INSTALLATION WORKS TO BE CARRIED OUT BY COMPETENT PERSONNEL - INSTALL AS COMPLETE UNIT
Bench (Surface or sub surface fix)
Stool (Surface or sub surface fix)
Serpentine Bench / Stool - Granite (surface & sub-surface fix)
1. Install suitable foundation pads to support the weight of the bench or stool each with top face at ground level
(or 100mm below finished ground level for stool - sub-surface fix)
2. Position bench / stool in correct orientation with bases centrally on foundation pads.
3. Check level & re-instate ground level if necessary (sub-surface fix).
3SERPENTINE (granite) installation
2200
450
500
Ground Level
600
450
500
50
Ground Level