fantastic furniture zoe D4 User manual

Assembly Instructions
Table D4
zoe
Ver1.3

Page 2
2
3
56
Read Instructions carefully.
Lay out all of the components on a soft surface
as if you were preparing to do a jigsaw puzzle.
Carefully identify each component, especially
those that are similar. The most common mistake
is getting things back to front.
Separate and identify each component from the
hardware pack and rest each one in its proper
W
A
R
N
N
G
WARNING
Check no parts are missing.
4
fully tighten screws（leave slightly
loose.When the item is fully assembled
tighten the screws - but do not over tighten.
FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE
THAT IS NOT COVERED BY YOUR WARRANTY
If glue is required DO NOT set until you are
certain that the parts belong together.

4x Spring Washers
(H4)
4x Nuts
(H5)
Socket Wrench
(provided)
Please make sure you have all these parts before you start.
What you Need
To Assemble the Body
Top Glass
(P1)
4x Foot
(H6)
4x Threaded Rod 4x Legs 4x Washers
(H1) (H2) (H3)

Insert each Threaded Rod(H1) into disc on
Top Glass (P1) surface and fasten tightly by hand.
4x spring washers
(H4)
4x Legs
4x Feet
(H2)
4x Washers
(H3)
4x Nuts
(H5)
(H5)
(H3)
(H6)
(H2)
(H4)
Use Washers (H3),Spring Washers(H4) and Nuts(H5)
to attach Legs(H2) and Feet(H6) to Top Glass(P1).
Take care to align feet in the center of leg.
Tighten with socket wrench provided.
Step 2
(H6)
4x Threaded Rod
(H1)
1x Top Glass
(P1)

Page 5
ALWAYS PICK UP THE TABLE BY THE TOP WHEN MOVING OR TURNING OVER.
DO NOT DRAG OR TURN OVER THE TABLE BY THE LEGS.