fantastic furniture TRUELOVE OTTOMAN RECTANGLE User manual

www.fantasticfurniture.com.au
Version 1.0
OO
TT MAN
TRUELOVE
RECTANGLE

www.fantasticfurniture.com.au
Enjoy
Your purchase from
Australia’s Best Value Furniture Store
Do not stand on, or use this ottoman as a step ladder.
Use this product for seating one person at a time.
This product should be checked periodically to ensure all
components are secure and all hardware is tight.
CAUTION
RECOMMENDED WEIGHT CAPACITY 120 KG
PAGE 2

Read through the instructions carefully
before you begin.
Assembly checklist
Identify and lay out all of the components
before you begin assembly. Unless instructed, do not fully tighten screws
until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
!If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
PAGE 3www.fantasticfurniture.com.au

www.fantasticfurniture.com.au
to assemble the product
PAGE 4
1 x O
(P1)
14 x Bolts
(H1)
yeKnellA
(H3)
Please make sure you have all these parts before you start.
x6 daPtleF
(H2)
ttoman emarFpoTx1
(P2)
emarFmottoBx1
(P3)
4 x Brace
(P4)
What you need

www.fantasticfurniture.com.au PAGE 5
Step 1
Step 2
(P3)
(P4)
(H1)
(H3)(H3)
(P4)
(P4)
(H1)
(H3)
(P4)
(P2)
You will need
(P3)
emarFmottoBx1
(P4)
4 x Brace
4 x Bolts
(H1) (H3)
yeKnellA
You will need
(P2)
emarFpoTx1
4 x Bolts
(H1) (H3)
Key ellA
(P3)
(P4)
n
Attach the 4 x braces to the bottom frame (P3).
Align the holes in the braces (P4) to the holes in the bottom frame (P3) and make sure that braces
are aligned with the corners of the frame and are facing the right way.
Screw in 4 x bolts into the bottom frame (P3) with the allen key (H3).
Flip the frame upside down and place the top frame (P2) on top of the braces (P4)
Align the holes of the top frame (P2) to the holes in the braces (P4).
Screw in 1 x bolt (H1) halfway into the frame.
Repeat this for the remaining 3 x bolts.
O nce all bolts are in,ensure to tighten them fully to attach the top frame (P2)
to the braces (P4).

www.fantasticfurniture.com.au PAGE 6
Step 4
Step 3
daPtleFx6
)2H(
You will need
(H1)
(H3)
You will need
(P1)
O ttomanx1
6 x Bolts
(H1) (H3)
yeKnellA
(P1)
(P1)
(H2)
Attach the 6 x felt pads (H2) to the underside of the frame
(A) (A) (A)
(B) (B) (B)
Place the ottoman (P1) upside down.
Place the completed frame on top of the ottoman (P1) so that the top frame is resting on the ottoman (P1).
Attach the frame to the ottoman (P1).
Screw 1 x bolt (H1) into hole (A) only halfway into the frame with the allen key (H3) and make sure
the holes align.
Screw 1 x bolt (H1) into hole (B) across from the previous hole (A) only halfway,and make sure
the holes align.
Repeat this for the 4 x remaining holes with the process of screwing in bolts into hole (A) and then (B)
only halfway into the frame.
O nce all bolts are screwed into the frame,ensure to tighten all bolts fully.

In the interest of our environment
Please dispose of all packaging thoughtfully
www.fantasticfurniture.com.au
Job Complete!
PAGE 7
Step 55