fantastic furniture House Single Bed User manual

Version1.0
HouseBed
Single
www.fantasticfurniture.com.au

Enjoy
Yourpurchasefrom
Australia sBest Value FurnitureStore
PAGE2
www.fantasticfurniture.com.au

PAGE3
Assemblychecklist
Useful Information
Readthrough theinstructionscarefully
beforeyoubegin. Makesureyouhave alltherequiredtools.
Never use powertoolsunlessinstructed.
Identifyand layout all ofthecomponents
beforeyoubeginassembly. Unless instructed,do notfullytighten screws until the item isfullyassembled.
! Neveruse powertoolsunless specificallyinstructed.They can damage yourcomponentsor
hardwareif used incorrectly.
! The most common mistakes made during assemblyareusing the wrong hardwareorgetting
componentsback tofront.
! Always use asoft surface (such as carpet orcardboard)when assembling yourproduct to
avoidscratching ordamaging the surface of the product.
! Bulky itemssuch as wardrobes and bunk bed shouldbe assembled inthe roomthey will be
used inas they may not fit through adooronce assembled.
! Neveruse any glue until you arecertainthat the partsbelong together.
! Periodicallycheck and re-tighten all fasteners. Check the product carelabel orwebsitefor
product careinstructions.
! If you arehaving any difficulties assembling yourproduct, missing any hardwareor
componentsplease visit ourwebsiteHelpCentreforfurtherassistance.

PAGE4
What youNeed
ToAssembletheProduct
www.fantasticfurniture.com.au
Pleasemakesureyouhaveallthesepartsbeforeyou start.
6xSteel
Dowels
(H1)
8xLocking
Nuts
(H10)
8xLocking
Screws
(H11)
8xLocking
Pin
(H7)
(Additional ToolsRequired)
PhillipsHeadScrewdriver
Mallet
8xLocking
Lids
(H12)
PartsList:
Box 1:Legs(P3,P4),Slat(P8),HardwarePack
Box 2:Rails(P1,P2,P5,P6,P7)
DONOTUSE

Step 2
You will need:
PAGE5
www.fantasticfurniture.com.au
Step 1
You will need:
2x Steel
Dowels
(H1)
4x Locking
Pin
(H7)
4x Bolts
(H2)
4x Locking
Nuts
(H10)
4x Locking
Screws
(H11)
1x Large
Spanner
(H8)
8x Wooden
Dowels
(H6)
(H8)
(H8)
X2
X2
4x Locking
Lids
(H12)
(H12)
Insert 2xSteelDowels(H1)
intotheRails(P1and P2).
Attach 4xBolts(H2)by using
aPhillipshead screwdriver.
Insert4xWoodenDowels(H6)and2xLockingPin(H7) toLegs (P3,P4)
Insert 2xLockingNuts(H10)and 2xLocking Screws(H11),
Screw the LockingNutsbyusingLargeSpanner (H8). Put4xLocking Lids
(H12) onopeninghole.
Fixing Kit: Howtoscrewsteeldowel?
Makesuretheopening ofsteel
dowelsfaceincomingbolt. Screw
one bolt intodowel, keepitloose,
thenscrewanotherbolt. Screwboth
sidesuntill tight.

Step 3
Step 4
www.fantasticfurniture.com.au
You will need:
4x Steel
Dowels
(H1)
8x Bolts
(H2)
You will need:
PAGE6
X2
14x Wooden
Dowels
(H6) X3
X2
(P7)
Insert 2xSteelDowels(H1)intothe Legsand Rails(P1
and P3;P2andP4).Attach4xBolts(H2) byusinga
Phillipsheadscrewdriver.
Insert2xWoodenDowels(H6) intoeach
roofbar(P7).
Insert4xWoodenDowels(H6) intoeach
SideRail(P6).

tep 5
tep 6
www.fantasticfurniture.com.au
You will need:
You will need:
PAGE7
2x Locking
Pin
(H7)
2x Locking
Nuts
(H10)
2x Locking
Screws
(H11)
2x Locking
Pin
(H7)
2x Locking
Nuts
(H10)
2x Locking
Screws
(H11)
(H8)
(H7)
Insert 1xLocking Pins(H7)toeach SideRail
(P6).Insert 1xLockingNut (H10)and 1x
Locking Screw (H11), screwtheLockingNutsby
usingLargeSpanner(H8), but don't screw tightly.
Insert1xLockingPins(H7)toeachSide Rail (P6).
Insert 1xLockingNut (H10)and 1xLocking Screw
(H11), screwtheLockingNutsby using Large
Spanner(H8),butdon'tscrew tightly.

Step 7
Step 8
www.fantasticfurniture.com.au
You will need:
PAGE8
6x Bolts
(H4)
6x Nuts
(H5)
1xAllen
Key
(H9)
Insert3xRoofBars(P7)between two
Sides.
Insert6xBolts(H4)and6xNuts(H5).
Makesuretheopening ofnutsface
incomingbolts.
Screw the Boltsby using Allen Key(H9).

PAGE9
Step 9
You will need:
10x Wood
Screws
(H3)
Job Complete!
Intheinterestofourenvironment
please disposeof all packingthoughtfully.
Makesuretheinnerspaceofbedframe
issquare,screwthelockingnutson side rails
untiltight, puttheSlat(P6) on slatholder,
use 10xWoodScrews(H3)tofixthe slat.
Put4xLocking Lids(H12) onopening hole
of siderails.
www.fantasticfurniture.com.au
4x Locking
Lids
(H12)