fantastic furniture Monaco User manual

Version 1.0
www.fantasticfurniture.com.au
MONACO
HallTable2Drawer
TWOPEOPLE
REQUIRED

PAGE2www.fantasticfurniture.com.au
Enjoy
Yourpurchasefrom
Australia'sBestValueFurnitureStore
Toavoidanyseriousorfatalinjury,thisproduct hasbeenfitted withawall bracket
toprevent toppling.Westronglyrecommendthat thisproductispermanentlyfixed
tothe wallorothersuitablesurface. Fixing devicesarenotincluded sincedifferent
surfacematerialsrequiredifferent attachments.Pleaseseekprofessional adviceif
you areindoubtof whatfixing devicetouse.
WARNING:ENSURETHEWALL BRACKETISATTACHED
TOAVOIDSERIOUSINJURY.

PAGE3www.fantasticfurniture.com.au
Read through the instructionscarefully
beforeyou begin. Makesureyou haveall the required tools.
Neverusepowertoolsunless instructed.
Identifyand layout all of the components
beforeyou begin assembly. Unless instructed, do not fullytighten screws until the itemisfullyassembled.
Assemblychecklist
Useful Information
!Neveruse powertools unless specifically instructed. Theycan damage yourcomponentsor
hardware if used incorrectly.
!The most common mistakesmade during assembly are using the wrong hardware orgetting
componentsback to front.
!Always use a soft surface (such ascarpet orcardboard)when assembling yourproduct to
avoid scratching ordamaging the surface of the product.
!Bulky itemssuch aswardrobesand bunkbedsshould be assembled in the roomtheywill be
used in astheymaynot fit through a dooronce assembled.
!Neveruse anyglue until you are certain that the partsbelong together.
! Periodically check and re-tighten all fasteners. Check the product care labelorwebsite for
product care instructions.
!If you are having anydifficultiesassembling yourproduct, missing anyhardware or
componentsplease visit ourwebsite Help Centre forfurtherassistance.

www.fantasticfurniture.com.au PAGE4
10 x BigCam
Bolt(H1)
1xAllen Key
(H12)
10 x BigCam
Nut (H2) 12 xBig Wood Dowel (H4) 4xSmall Wood Dowel (H5) 8xScrew (H6)
13 xScrew
(H7) 16 xScrew (H8) 4xSmall Cam Nut (H9) 2xMetal Handle (H11)
4xSmall Cam
Bolt (H10)
1xWall
Bracket(H13) 4xScrew (H14) 4xBack Panel Connector(H15) 12 xBolt
(H16) 5xBolt
(H17)
2xScrew
(H3)
4xSlide
(H18)
Whatyouneed
toassembletheproduct
Othertoolsyou need
Flat head screwdriver; Phillipshead
screwdriver; Mallet
Partlist
Box1: 4xLeg (P14); Hardware.
Box2: Top Panel (P1); BottomPanel (P2); Left Side Panel (P3);
Right Side Panel (P4); DividerPanel (P5); DrawerFront Left (P6);
DrawerFront Right (P7); 2xDrawerLeft Side (P8); 2xDrawerRight
Side (P9); 2xDrawerBack Panel (P10); 2xDrawerBase(P11);
Back Panel (P12); Metal Bar(P13).
TopPanel
(P1)
DrawerLeft Side
(P8)
DrawerBack
Panel (P10)
Divider
Panel (P5)
Metal Bar(P13)
(P8)
(P9)
(P11)
(P10)

Step 1
www.fantasticfurniture.com.au PAGE5
Step 2
6xCam
Bolt (H1) Phillipshead
screwdriver
Youwillneed
Screw 6xCamBolts(H1)intoTop Panel (P1)asshown.
4xBigCam
Bolt (H1)
4xSlide
(H18)
4xBigWood
Dowel (H4)
Phillipshead
screwdriver
Youwillneed
6xScrew
(H7)
Mallet
Separatethe Slide Runners (H18-2)and SlideTracks (H18-1)fromSlide (H18)
byfollowingthestepsbelow:
Extend the Slide Runnerall the wayforward.
Press the plasticreleaseleverof the slide down and pull the Slide Runner
(H18-2)completelyout.
Insert 2xBig Wood Dowels(H4)intoLeft Side Panel (P3).
Screw 2xBig CamBolts(H1)intoLeft Side Panel (P3).
Attach1xSlide Tracks (H18-1)ontoLeft Side Panel (P3)
with3xScrews(H7).
Insert 2xBig Wood Dowels(H4)intoRight Side Panel (P4).
Screw 2xBig CamBolts(H1)intoRight Side Panel (P4).
Attach1xSlide Tracks (H18-1)ontoRight Side Panel (P4)
with3xScrews(H7).

Step 3
www.fantasticfurniture.com.au PAGE6
H18-1
H7 H7 H7
Step 4
4xBigWood
Dowel (H4)
Phillipshead
screwdriver
Youwillneed
6xScrew
(H7)
Mallet
Insert 4xBig Wood Dowels(H4)intoDividerPanel (P5).
Attach1xSlide Track (H18-1)ontoone side of DividerPanel (P5)with3xScrews(H7);
TurnDividerPanel (P5)around and attach1xSlide Track (H18-1)ontoanotherside with3xScrews(H7).
4xBigWood
Dowel (H4)
Youwillneed
Mallet
(P2)
2xSlide
Track (H18-1)
Insert 4xBig Wood Dowels(H4)intoBottomPanel (P2).

Step 5
www.fantasticfurniture.com.au PAGE7
Step 6
Allen Key
(H12)
2xScrew
(H3)
Youwillneed
Position BottomPanel (P2)on itsedge with
itsgroovenearertothe floor.
Position the DividerPanel (P5)ontothe
BottomPanel (P2), withitsbareedge facing
downward, and itscamnut holesarefurthest
awayfromtheBottomPanel.
FixDividerPanel (P5)toBottomPanel (P2)
with2Screws(H3)usingAllen Key(H12).
Youwillneed
Flathead
screwdriver
4xCam
Nut (H2)
Thisishow acamnut works........
The headof the cam
boltgoesintothe open
mouthofthecamnut.
Youthenturnthe cam
nutsoittightensover
thebolt.
(P2)
(P4)
(P2)
Position Left Side Panel (P3)and Right Side Panel (P4)ontoBottomPanel (P2), sothat theirgroovesarealigned.
Insert 4xBig CamNuts(H2)intoBottomPanels(P2)and turnclockwisetolock.

Step 7
www.fantasticfurniture.com.au PAGE8
Step 8
Allen Key
(H12)
12 xBolt
(H16)
Youwillneed
Allen Key
(H12)
5xBolt
(H17)
Youwillneed
AttachMetal Bar(P13)ontoBottomPanel (P2)with5xBolts(H17)using Allen Key(H12).
Withhelp, turnthe assembled unit overcarefully.
H17
H17
H17
H17
H17
H12
H12
H16
H16
H16
H16 H16
Phillipshead
screwdriver
1xScrew
(H7) 1xWall Bracket (H13)
FixeachMetal Leg (P14)ontoBottomPanel (P2)with3xBolts(H16)using Allen Key(H12).
Fasten Wall Bracket (H13)ontoBottomPanel (P2)withScrew (H7)asshown.
DonotfullytightentheScrew(H7).

Step 9
www.fantasticfurniture.com.au PAGE9
Step 10
Youwillneed
Flathead
screwdriver
6xBigCam
Nut (H2)
Position Top Panel (P1)ontoSide Panels(P3)&(P4),
DividerPanel (P5)and Back Panels(P12).
Insert 6xBig CamNuts(H2)intoSide Panel (P3)&(P4),
DividerPanel (P5)and turnclockwisetolock.
(P2)
(P3)
(P4)
(P4)
(P5)
(P3)
Thisishow acamnut works........
The headof the cam
boltgoesintothe open
mouthofthecamnut.
Youthenturnthe cam
nutsoittightensover
thebolt.
Slide Back Panel (P12)intothe groovesasshown.

Step 11
www.fantasticfurniture.com.au PAGE10
Step 12
4xBackPanel
Connector(H15)
4xScrew
(H14)
Youwillneed
Youwillneed
Phillipshead
screwdriver
Westronglyadvisethat
youusethewallsafety
Bracketprovided to
preventtheunittoppling.
Seek advice fromaqualified
trades personon how to
attachthissafetyBracketto
yourspecificwall.
Screw and Wall Plug arenot
provided.
Pleaseuseappropriate
fixturesforyourwall.
H13
(P12)
(P2) (P1)
(P1)
(P3)
(P4)
If necessary, gentlyadjust the Top Panel (P1)sidewayin eitherdirection until XX and YY areequal.
Fixthe Back Panel Connectors (H15)withScrews(H14)asshown.
Phillipshead
screwdriver
H7
XX YY
XX =YY
(P2)
(P2) H7
MovetheHallTabletothefinalposition.
Mark fixing hole on wall and removeHall Table.
Followtheinstructionsprovidedforthewallfittingsto
mountthefittingstothewall.
Reposition Hall Table and fixthe safetyWall Bracket (H13)
tothewall.Makesureitisfirmlyattached.
Fullytighten the screw (H7)on the Wall Bracket (H13)to
the BottomPanel (P2).

Step 13
www.fantasticfurniture.com.au PAGE11
Step 14
4xSmall
CamBolt (H10)
12 xScrew
(H8)
4xSlide
Runner(H18-2)
Phillipshead
screwdriver
Youwillneed
4xSmall
WoodDowel
(H5)
Screw 2xSmall CamBolts(H10)
intothe DrawerFronts(P6)&(P7)
using aPhillipsheadscrewdriver.
Insert 1xSmall Wood Dowel (H5)
intoeachDrawerLeft Side (P8)and
DrawerRight Side (P9)asshown.
Attach1xSlide Runner(H18-2)onto
eachDrawerSides(P8)&(P9)
with3xScrews(H8).
8xScrew
(H6)
Youwillneed
Phillipshead
screwdriver
Attach1xDrawerLeft Side Panel (P8)and 1xDrawerRight Side Panel (P9)to
1xDrawerBack Panel (P10)with4xScrews(H6), sothat theirgrooves
arealigned.
Repeat forall drawerpanels.
Slide 1xDrawerBase(P11)intothe grooves
in the DrawerPanels(P8), (P9)and (P10).
Repeat withthe otherDrawerBase(P11).
(P6)
(P7)
(P8)
(P8)
(P8)
(P9)
(P9)
(P9)
(P10)
(P10)

Step 15
www.fantasticfurniture.com.au PAGE12
Step 16
4xSmall
CamNut (H9)
Youwillneed
Phillipshead
screwdriver
Position DrawerFront (P6)ontoDrawerSides(P8)&(P9).
Rotate1xSmall CamNut (H9)sothe arrowpointstowardsthe incoming cambolt
and insert the Small CamNut (H9)intoDrawerSide Panel (P8)or(P9).
Repeatwiththeremaining1xSmallCamNut(H9).
TurnSmall CamNuts(H9)clockwisetolock.
Repeat withotherDrawerFront (P7).
Youwillneed
2xMetal
Handle (H11) 4xScrew
(H8)
Phillipshead
screwdriver
Attach1xMetal Handle (H11)ontoeachDrawerFront (P6)or(P7)with
2xScrews(H8)using aPhillipshead screwdriver.
Do not over-tighten the screws(H8).
(P6)
(P6)
(P7)
(P7)
(P8)
(P9) (P9)

Step 17
www.fantasticfurniture.com.au PAGE13
x
x
MoveInnerBall Bearing Track outward.
PushMiddle Track in.
GentlyInsert Slide RunnerintoBall Bearing Track.
Position Drawersothat Slide Runner(H17-2)alignswithSlide Track (H17-1)asshown.
Gentlypushdrawerintothe closed position.

www.fantasticfurniture.com.au PAGE14
IftheHallTableisnotlevel,youcanadjusttheheightofeachLegbyturningthe feet
of Legsclockwiseorcounter-clockwise.
(P14) (P14)
Step 18

Job Complete!

!