fantastic furniture GALLERY User manual

Display Cabinet 4 Shelf
Version: 1.7
Gallery
www.fantasticfurniture.com.au

Secure it!
Wall attachment guide
For plasterboard
(with available wood stud)
Securing method:
Screw inserted directly into
stud.
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY
OR DEATH.
To avoid any serious or fatal injury, a wall strap has been provided with this
product to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are not
included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
•Do not allow children to stand, climb or hang on furniture. It may topple
and cause serious injury or death.
•Do not place toys or other child appealing items on top of this furniture,
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
•Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
•Avoid putting a TV on this product.
Reduce the risk of furniture
tip-over accidents
Page 2
For plasterboard
(without available wood stud)
Securing method:
Self drilling plasterboard
anchor.
For masonry wall
Securing method:
Solid wall: Plug with screw
Hollow wall: Spring toggle
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.
Weight capacity: 10kgs/shelf.
To reduce the risk of furniture tipover:

Page 3
fantasticfurniture.com.au
Scratches, chips, sudden changes in temperature and hairline fractures may
cause glass to break. This glass is designed to break into small, relatively
harmless pieces and not sharp fragments.
Avoid placing hot or cold items directly onto the table unless using a thick
insulation material such as placemats or coasters.
Avoid dropping objects onto the glass. Do not allow hard or pointed objects to
come into contact with the glass. Never use the top area as a chopping
surface. Do not sit or stand on the glass surface.
Tempered Glass
Glass should always be handled with care.
THIS PRODUCT MUST BE ASSEMBLED ON A SOFT
SURFACE SUCH AS CARPET OR A RUG TO PREVENT
ACCIDENTAL SHATTERING DURING ASSEMBLY. IF
YOU DO NOT HAVE THESE IN YOUR HOME THEN LAY
THE CARDBOARD PACKAGING FLAT AND ASSEMBLE
ON TOP OF THE EMPTY PACKAGING.
DO NOT ASSEMBLE ON A HARD SURFACE.

Page 4
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram
for your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love

Page 5
Assembly Checklist
Read through the instructions carefully
before you begin
Identify and lay out all of the
components before you begin assembly
! Never use power tools unless specifically instructed. They can damage you
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
components please visit our website Help Centre for further assistance.
Make sure you have all the required tools.
Never use power tools unless instructed.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
Useful information
www.fantasticfurniture.com.au
! Please see page 2 for any safety requirements or weight restrictions.

fantasticfurniture.com.au
Page 6
(P4)
Other tools you need
Phillips Head Screwdriver
(P8)
Parts List:
Box 1
Base (P1);
Shelf (P2);
Top Panel (P3);
Left Panel (P4);
Right Panel (P5);
Left Back (P6).
Left Door (P8);
Right Door (P9)
Hardware Pack:
34 x Knob Bolt 4 x Feet
4
(H1) (H2)
4 x Magnetic Catch
(H5)
2 x Strike Plates/Foam Inser
t
(H6)
2x M4 x 14 mm Screws
(H9)
4 x Metal Washers
(H10)
(P3) (P7)
(P2)
(P2)
(P5)
(P2)
(P9)
(P1)
x M4 x 22 mm Screws 4 x Door Hinges/Hinge Plates
(H3)
2 x Door Handles/Foam Inserts
t
s
4 x Plastic Sleeve
(H4)
2 x Wall Straps
(H11)
34 x Plastic Washers
(H12)
(P6)
(H7) (H8)
Box 2
2x Shelf (P2);
Right Back (P7);
What you need
to assemble the product

fantasticfurniture.com.au
Page 7
You will need
4 x Feet
(H2)
4x M4 x 22 mm
Screws (H3)
Phillips Head
Screwdriver
Attach Feet (H2) to Base (P1) using 4 x Screws (H3) and tighten using Phillips Head Screwdriver.
10 x Knob Bolt
(H1）
Attach Left Panel (P4) to Base (P1), 3 x Shelf (P2)
Ensure holes in (P1) ~ (P3) face upwards.
(H2)
(H3)
(P1)
3
and Top Panel (P3) with 10 x Knob Bolt (H1) and
(P1)
(P2)
(P2)
(P2)
(P3) (H12)
(H1)
You will need
10 x Plastic Washers
(H12)
10 x Plastic Washers (H12).
Step 1
Step 2
THIS PRODUCT MUST BE ASSEMBLED ON A SOFT
SURFACE SUCH AS CARPET OR A RUG TO PREVENT
ACCIDENTAL SHATTERING DURING ASSEMBLY. IF YOU
DO NOT HAVE A SOFT SURFACE. LAY THE CARDBOARD
PACKAGING FLAT AND USE AS A BASE FOR ASSEMBLY.

fantasticfurniture.com.au
Page 8
Attach Right Panel (P5) to Base (P1), 3 x Shelf (P2) and Top Panel (P3) with 10 x Knob Bolts (H1)
(P5)
(P1)
(P2)
(P2)
(P2)
(P3)
(H1)
(H12)
(H1)
(H12)
and 10 x Plastic Washers (H12)
Attach Right and Left Back Panel (P7), (P6) to Base (P1), 3 x Shelf (P2) and Top Panel (P3) with 14
x Knob Bolt (H1) and 14 x Plastic Washers (H12). With help, carefully stand the cabinet upright.
(P7)
(P7)
(P2)
(P3)
(P2)
(P2)
(P1)
Step 3
10 x Knob Bolt
(H1）
You will need
10 x Plastic Washers
(H12)
Step 4
14 x Knob Bolt
(H1）
You will need
14 x Plastic Washers
(H12)

fantasticfurniture.com.au
Page 9
Step 5
You will need
Step a
2x Door Hinges/
Hinge plates (H4)
Phillips Head
Screwdriver
(H4)
Attach hinges onto doors.
Step a. Peel o° backing of Hinge Plate (H4).
Step b. Paste Hinge Plate (H4) onto two corners alo
Step c. Attach the Hinges to the Hinge Plates with
Repeat process for other door
Step 6
1x Door Handle/
Foam Insert (H7)
1 x Strike Plate/
Foam Insert (H6)
Step a
Attach handle and strike plate onto doors
Step a. Remove the Foam Insert from the Strike Plate (H6).
Step b. Peel o° the backing from Foam Insert and paste it onto the bottom corner of the Door (P9).
Step c. Slide the Strike Plate (H6) into position.
Step d. Remove the Foam Insert from the Door Handle (H7).
Step e. Peel o° the backing from Foam Insert and
Step f. Slide the Door Handle (H7) into position.
Repeat process for other door
Step b
Step c
(H4)
(P9)
ng the short edge of the Door (P9).
screws. DO NOT OVERTIGHTEN.
Step b
(H7)
Step d
Step e
Step f
Step c
(H6)
paste it onto the top corner of the Door (P9).
(P9)
You will need

fantasticfurniture.com.au
Page 10
Step 7
You will need
4 xMagnetic Catch
(H5)
4x Plastic Sleeve
(H8)
Phillips Head
Screwdriver
Fasten magnetic catch (H5) to the Top Panel (P3) and Base (P1).
Insert 1x Plastic Sleeve (H8) each into the Top (P3) and Base (P1).
Place the Door (P11) with its hinge into the Plastic
Loosen the Door Hinge (H4) on the top of Door (P9)
Insert the top hinge into the Plastic Sleeve (H8) on
Slide the top corner of Door (P9) into the hinge.
Tighten the bolts on the door hinge with a Phillips
Repeat process for other door
Step 8
2x Wall Straps
(H11)
It is recommended that the unit is fixed to a wall.
As wall materials vary, screws for fixing to wall are not included
For advice on suitable screw systems, contact your local
specialized dealer.
Move the cabinet to the desired position against a wall.
Mark a line on the wall at 2 sides of top edge of the cabinet.
Remove the cabinet, mark a point about 10 mm below the line.
Attach the wall strap (H11) with the appropriate screw system
and 2x Metal Washers (H10).
(H4)
(H8)
(H5)
(H5) (H8)
(H4)
Sleeve (H8) in Base (P1).
with a Phillips Head Screwdriver.
the Top Panel (P3).
Head Screwdriver ensuring contact with the hinge plate.
2x Metal
Washers (H10)
You will need
Phillips Head
Screwdriver
(H11)
(H10)

fantasticfurniture.com.au
Page 11
Step 9
You will need
2x M4 x 14 mm
Screws (H9)
2x Metal Washers
(H10)
Phillips head
Screwdriver
Reposition the cabinet. Attach the cabinet at its top
to the Wall Straps (H11) using 2 x Screws (H9) and
2 x Metal Washers (H10).
Step 10
Job complete!
In the interest of our environment Please dispose
of all packing thoughtfully.
(H9)
(H10)