fantastic furniture Java User manual

Version 1.0
Java
Desk 2 Drawer
fantasticfurniture.com.au
Required
Two People

fantasticfurniture.com.au Page 2
Rattan
Rattan is a natural material that will respond to humidity in the
environment. Low humidity may cause the rattan to shrink.
High humidity may cause the rattan to absorb moisture and expand,
causing the weaving to look loose and wavy.
This is a natural phenomenon and not a defect.
Looks like you’ve found
your Fantastic!
Love it? Share it!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Fantastic buy! Share how it looks at home on Instagram
for your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Recommended weight capacity: 60kgs on top

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

Top Panel (P1)
What you need
to assemble the product
Other tools you need
Phillips Head Screwdriver
fantasticfurniture.com.au
Page 4
Parts list
Carton 1:
1 x Left Bottom Panel (P2)
1 x Right Bottom Panel (P3)
2 x Drawer Fronts (P9)
2 x Drawer Left Sides (P10)
2 x Drawer Right Sides (P11)
2 x Drawer Backs (P12)
2 x Drawer Bases (P13)
4 x Legs (P14)
Left Bottom
Panel (P2)
Right Bottom
Panel (P3)
Side Panel
(P4)
Side Panel
(P4)
Back Panel (P8)
Metal Rail (P15)
Left Divider
Panel (P5)
Right Divider
Panel (P6)
Shelf (P7)
Drawer Front (P9)
Drawer Left
Side (P10)
Drawer Right
Side (P11)
Drawer
Back (P12)
Drawer
Base (P13)
(P10)
(P11)
(P12)
(P13)
Leg (P14)
Leg (P14) Leg (P14)
Leg (P14)
Carton 2:
1 x Top Panel (P1)
2 x Side Panels (P4)
1 x Left Divider Panel (P5)
1 x Right Divider Panel (P6)
1 x Shelf (P7)
1 x Back Panel (P8)
1 x Metal Rail (P15)

fantasticfurniture.com.au
Page 5
Hardware Pack
37 x Large Cam
Bolts (H1)
29 x Large Cam
Nuts (H2)
33 x Large
Dowels (H3)
2 x Handles
(H4)
8 x Flat Washers
(H7)
8 x Spring
Washers (H8)
4 x Felt Pads
(H5)
8 x Bolts
(H6)
4 x Slides
(H15)
14 x Long Screws
(H13)
4 x Rail Bolts
(H16)
4 x Handle
Screws (H9)
1 x Allen Key
(H10)
8 x Small Cam
Nuts (H11)
4 x Small
Dowels (H12)
24 x Slide Screws
(H14)

Step 1
Page 6fantasticfurniture.com.au
You will need
4 x Slides
(H15)
H15
Separate 4 x Slides (H15) into Slide Tracks (H15-1)
and Slide Runners (H15-2) as shown below:
(H15)
Slide Runner (H15-2) Slide Track (H15-1)
(H15-1)
(H15-1)
Adjust runner to access the screw holes.
(H15-1)
X2
(H3)
(H14)
(P4)
Use the holes shown below
on the Slide Track (H15-1) to secure the screws
(H15-1)
(H1)
Step 2
You will need
Phillips Head
Screwdriver
6 x Slide
Screws (H14)
2 x Slide
Tracks (H15-1)
8 x Large
Dowels (H3)
4 x Cam Bolts
(H1)
Press down on the plastic release lever
to extend the Slide Runner (H15-2) from Slide Track (H15-1)
and then separate the two pieces completely.
Ensure the rubber stopper on
Slide Track (H15-1) is placed
correctly on side panel as shown.
Insert 4 x Large Dowels (H3) into Side Panel (P4).
Secure 1 x Slide Track (H15-1) to Side Panel (P4) with 3 x Slide Screws (H14) as shown
by tightening with the Phillips Head Screwdriver.
Attach 2 x Cam Bolts (H1) to Side Panel (P4) by tightening with the Phillips Head Screwdriver.
Repeat steps for the second Side Panel (P4).
(H3)
(H3)
(H3)
(H14)
(H14)
(H1)

Step 3
Page 7fantasticfurniture.com.au
You will need
Phillips Head
Screwdriver
6 x Slide
Screws (H14)
2 x Slide
Tracks (H15-1)
Insert 10 x Large Dowels (H3) into Left & Right Divider Panels (P5&P6) as shown.
Secure 2 x Slide Tracks (H15-1) to Left & Right Divider Panels (P5&P6)
with 6 x Slide Screws (H14) as shown by tightening with the Phillips Head Screwdriver.
10 x Large
Dowels (H3)
(H15-1)
4 x Cam Bolts
(H1)
(P5)
(H3)
(H15-1)
(H15-1)
(H14)
(P5)
(H1)
(P6)
(P6)
Ensure the rubber stopper
on Slide Track (H15-1) is
placed correctly
on side panel as shown.
(H15-1)
Use the holes shown below
on the Slide Track (H15-1) to secure the screws
Step 4
You will need
Turn Left & Right Divider Panels (P5&P6) over and attach 4 x Cam Bolts (H1)
as shown by tightening with the Phillips Head Screwdriver.
(H1)
(H1)
(H1)
Phillips Head
Screwdriver
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H14)
(H14)
(H14)
(H14)
(H14)

Step 5
Page 8fantasticfurniture.com.au
You will need
5 x Large
Dowels (H3)
Step 6
You will need
Insert 5 x Large Dowels (H3) into Shelf (P7) as shown.
(H3)
4 x Large Cam
Nuts (H2)
Insert 4 x Large Cam Nuts into Shelf (P7)
and rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Left & Right Divider Panels (P5&P6) to Shelf (P7)
by tightening the cam nuts with the Phillips Head Screwdriver.
(P7)
(P7)
(P5)
(P6)
(H2)
Ensure all raw edges on the divider panels
and shelf are at the back of the desk
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(H3)
(H3)
(H3)
(H3)
(H2)
(H2)
(H2)
Phillips Head
Screwdriver

Step 7
Page 9fantasticfurniture.com.au
You will need
10 x Large
Dowels (H3)
Step 8
You will need
Insert 10 x Large Dowels (H3) into Back Panel (P8) as shown.
6 x Long
Screws (H13)
Attach Back Panel (P8)
to Left & Right Divider Panels (P5&P6)
and Shelf (P7) with 6 x Long Screws (H13)
as shown by tightening with the Phillips Head Screwdriver.
(P8)
Phillips Head
Screwdriver
(H3)
(P8)
(P7)
(P5)
(P6)
Ensure the cam nut hole in the middle of back panel
is aligned on the same side as the grooves
in left & right dividers as shown before securing
(H13)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H13)
(H13)
(H13)
(H13)
(H13)

Step 9
Page 10fantasticfurniture.com.au
You will need
Step 10
You will need
4 x Large Cam
Nuts (H2)
Phillips Head
Screwdriver
10 x Cam Bolts
(H1)
Attach 10 x Cam Bolts (H1)
to Left & Right Bottom Panels (P2&P3)
by tightening with the Phillips Head Screwdriver.
(P4)
(P4)
(P8)
(P2)
(P3)
(H1)
(H2)
Phillips Head
Screwdriver
(H2)
Insert 4 x Large Cam Nuts (H2) into Back Panel (P8) as shown
and rotate the cam nuts so the arrows point towards
the incoming cam bolts. Attach Side Panels (P4x2) to Back Panel (P8)
by tightening the cam nuts with the Phillips Head Screwdriver.
(H2)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)