fantastic furniture Casper Office Chair User manual

Casper
Office Chair

Page 2
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
! Never use power tools unless specifically instructed. They can damage your components
or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will
be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.

Page 4
Allen Key
(H4)
Parts list
Box 1:
Seat (P1);
Seat Plate (P2);
Gas Lift (P3;
Decoration Cap (P4);
Star Base (P5);
5 x Castors (P6);
Seat (P1)
Seat Plate (P2)
Gas Lift (P3)
Decoration Cap (P4)
Star Base (P5)
5 x Castors (P6)
2 x Short Bolts
(H2)
2 x Long Bolts
(H3)
2 x Gaskets
(H1)
Other tools you need:
N/A

Page 5
Step 1
Step 2
Insert 5 x Castors (P6) into the Star Base (P5) as shown.
Push down firmly on each castor to ensure they are fixed in position.
Remove the Plastic Cap from the top of the Gas Lift (P3).
Place the Decoration Cap (P4) over the top of the Star Base (P5).
Insert the Gas Lift (P3) through the Decoration Cap (P4) and into the Star Base
(P5) as shown.
Star Base (P5)
Star Base (P5)
Castors (P6)
Gas Lift (P3)
Decoration Cap (P4)
Note:Make sure to remove the
plastic cap from the top of gas lift.

Page 6
Step 3
Step 4
Align the holes on the Seat Plate (P2) and use the Allen Key (H4) to fasten the 2 x Short Bolts
(H2), 2 x Long Bolts (H3) and 2 x Gaskets (H1) to the Seat (P1).
Please note the position of the Gaskets are for the front 2 x Long Bolts (H3).
Position the centre of the Seat Plate (P2) over the top of the Gas Lift (P3).
Carefully lower the Seat (P1) onto the Gas Lift (P3).
Carefully and firmly press the seat down to lock it into position.
Check the connection is secure before sitting in the chair.
You will need
2 x Gaskets
(H1)
Allen Key
(H4)
Bolts(H3)
Allen Key (H4)
Allen Key (H4)
Seat (P1)
Gaskets (H1)
Seat Plate (P2)
Seat (P1)
Seat Plate (P2)
Gas Lift (P3)
Bolts (H2)
ǸʇũʇöĜĹņʇ
ĜĎņĽʇɥ?Ǹɦ
ǸʇũʇTĜĕñʇ
ĜĎņĽʇɥ?ǹɦ

Page 7
Job Complete !
In the interest of our environment please dispose of all packaging thoughtfully.