fantastic furniture Cove Hall Table User manual

Cove
Hall Table 1 Drawer
fantasticfurniture.com.au
Version 1.0

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Recommended weight capacity : 15kg/Drawer.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Bottom Panel (P2);
Left Side Panel (P3);
Right Side Panel (P4);
Back Panel (P5);
Rail (P6);
2 x Legs (P7);
Rail (P8);
Rail (P9);
Rail (P10);
Drawer Front (P11);
Left Drawer Side (P12);
Right Drawer Side (P13);
Drawer Back (P14)
Drawer Base (P15);
Rail (P16)
Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Flat head screwdriver;
Hammer
Page 4
DO NOT USE
fantasticfurniture.com.au
Top Panel
(P1)
Left Side
Panel (P3)
Right Side
Panel (P4)
Bottom Panel
(P2)
Back
Panel (P5)
Leg
(P7)
Leg
(P7)
Left Drawer
Side (P12)
Right Drawer
Side (P13)
Drawer Back
(P14)
Drawer
Base
(P15)
Drawer Front
(P11)
Rail
(P16)
Rail
(P6)
Rail
(P8)
Rail
(P9)
Rail
(P10)
9 x Cam
Bolts
(H3)
9 x Cam
Nuts
(H4)
8 x Dowels
(H1)
4 x Nuts
(H10)
10 x Small
Screws
(H5)
1 x CL
Runner
Track
(H6)
1 x CR
Runner
Track
(H7)
1 x DR
Runner
(H9)
1 x DL
Runner
(H8)
12 x Screws
(H2)
4 x Bolts
(H11)
1 x Screw
(H18)
1 x Safety
Strap
(H17)
2 x Washers
(H19)
4 x Plastic
Glide
(H12)
4 x Wedges
(H13)
4 x Wedge
Screws
(H14)
2 x Dowels
(H15)
9 x Long
Screws (H16)

You will need
Step 1
Attach 2 x Cam Bolts (H3) to Left & Right Side Panels (P3 & P4).
Attach 1 x CR Runner Track (H7) to Right Side Panel (P4) with 3 x Small Screws (H5).
Attach 1 x CL Runner Track (H6) to Left Side Panel (P3) with 3 x Small Screws (H5).
Tighten with a Phillips Head Screwdriver.
Phillips Head
Screwdriver
4 x Cam Bolts
(H3)
2 x Cam Bolts
(H3)
Page 5
fantasticfurniture.com.au
Step 2
You will need
Attach 4 x Cam Bolts (H3) to Top Panel (P1) as shown. Tighten with a Phillips Head Screwdriver.
(P1)
(P3)
(P4)
6 x Small
Screws (H5)
1 x CL Runner
Track (H6)
Phillips Head
Screwdriver
1 x CR Runner
Track (H7)
H3
H3
H3
H3
H3
H3
H7
CR
H5
H6
CL
H5
H6
H5
H5
H5
H5
H5
H5
H7

You will need
Step 3
Insert 4 x Dowels (H1) into
Top Panel (P1). Insert 4 x Cam
Nuts (H4) into Left & Right Side
Panel (P3 & P4) as shown. Rotate
the cam nuts so the arrow points towards the incoming
cam bolts. Attach Left & Right Side Panel (P3 & P4) to Top Panel (P1) by tightening
with the Phillips Head Screwdriver. Attach Rail (P6) to Top Panel (P1) with 3 x
Screws (H2). Tightening with the Phillips Head Screwdriver.
Insert 2 x Cam Nuts (H4) into Rail (P6) as shown. Rotate the cam nuts so the arrow points
towards the incoming cam bolts. Attach Left & Right Side Panel (P3 & P4) to Rail (P6) by
tightening with the Phillips Head Screwdriver.
You will need
Step 4
Phillips Head
Screwdriver
Phillips Head
Screwdriver
4 x Dowels
(H1)
4 x Cam Nuts
(H4)
2 x Cam Nuts
(H4)
Page 6
fantasticfurniture.com.au
(P1)
(P3)
(P3)
(P6)
(P6)
(P4)
(P4)
H4
H4
H4
H1
H1
H1
H1
H2
H2
H2
H4
H4
Countersink face up.
3 x Screws
(H2)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.

Step 6
You will need
Step 5
Insert 4 x Dowels (H1) into the Left & Right Side Panels (P3 & P4). With assistance,
carefully align with Bottom Panel (P2) to the assembled frame as shown. Secure
together using 4 x Screws (H2), tightening with a Phillips Head Screwdriver.
Slide Back Panel (P5) into the grooves between Left & Right Side Panel (P3 & P4) as shown.
Phillips Head
Screwdriver
4 x Dowels
(H1)
fantasticfurniture.com.au Page 7
(P3)
(P4)
(P5)
(P2)
(P4)
(P3)
H2
H1
H1
H1
H2
H2
H2
4 x Screws
(H2)
Required
Two People

Attach assembled leg
frame to Bottom Panel (P2)
and secure with 9 x Long
Screws (H16). Tighten with
a Phillips Head Screwdriver.
Hammer 4 x Plastic Glides
(H12) to end of Legs (P7 x 2)
as shown. With assistance
carefully turn the unit upright.
Push 4 x Bolts (H11) through Legs (P7) and attach Legs (P7 x 2) to Rails (P8, P9, P10)
using 4 x Nuts (H10) and a Flat Head Screwdriver. Tightening with the Phillips Head Screwdriver.
You will need
Step 8
Phillips Head
Screwdriver
You will need
Step 7
Phillips Head
Screwdriver Hammer
Flat head
screwdriver
fantasticfurniture.com.au Page 8
4 x Nuts
(H10)
4 x Bolts
(H11)
(P7)
(P7)
(P8)
(P8)
(P9)
(P9)
(P10)
(P10)
(P7)
(P7)
(P2)
H10
H10
H10
H11
H11
H11
H11
H11
H12
H12
H12
H12
H16
H16
H16
H16
H16
H16
H16
9 x Long
Screws (H16)
Ĝ
h
Countersink
face up.
4 x Plastic
Glides (H12)
Required
Two People

Attach Drawer Back (P14) to Left & Right Drawer Side (P12 & P13)
and Rail (P16) with 5 x Screws (H2) by tightening with the Phillips Head Screwdriver.
You will need
Step 10
You will need
Step 9
Phillips Head
Screwdriver
3 x Cam Bolts
(H3)
Phillips Head
Screwdriver
fantasticfurniture.com.au
Attach 3 x Cam Bolts (H3) to Drawer Front (P11) as shown. Tighten with a Phillips
Head Screwdriver.
(P13)
(P14)
(P12)
(P16)
(P11)
H2
H2
H2
H3
H3
H3
Page 9
5 x Screws
(H2)

Step 11
Insert 2 x Dowels (H15) into
Left & Right Drawer Side (P12 & P13).
Insert 3 x Cam Nuts (H4) into
Left & Right Drawer Side (P12 & P13) and Rail (P16)
as shown. Rotate the cam nuts so the arrows point
towards the incoming cam bolts. Attach Drawer
Front (P11) to Left & Right Drawer Side (P12 & P13)
and Rail (P16). Make sure that the groove lines up
the whole way around the drawer. Tighten with a Phillips Head Screwdriver.
Slide Drawer Base (P15) into the grooves of Left & Right Drawer Side (P12 & P13).
You will need
Step 12
Phillips Head
Screwdriver
3 x Cam Nuts
(H4)
2 x Dowels
(H15)
fantasticfurniture.com.au
(P13)
(P13)
(P15)
(P12)
(P12)
(P11)
(P16)
H4
H4
H4
H15
H15
Page 10

Step 14
You will need
Step 13
Carefully insert the drawer into the unit by gently guiding the
runners into the tracks.
Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P12) and 1 x DR Runner (H9)
to the bottom of Right Drawer Side (P13) with 4 x Small Screws (H5) by tightening with the
Phillips Head Screwdriver.
Phillips Head
Screwdriver
H5
H5
H5
H5
H8
H9
fantasticfurniture.com.au
(P13)
(P12)
Page 11
4 x Small
Screws (H5)
1 x DL
Runner (H8)
1 x DR
Runner (H9)

You will need
Step 15
Secure Back Panel (P5) in place with 4 x Wedges (H13) using 4 x Wedge Screws (H14) by
tightening with the Phillips Head Screwdriver. Use 1 x Screw (H18) and 1 x Washer (H19)
to connect 1 x Safety Strap (H17) on Top Panel (P1).
Phillips Head
Screwdriver
H13
H14
H19
H19
H18
H18
H17
H17
1 x Screw
(H18)
1 x Safety
Strap (H17)
1 x Washer
(H19)
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
With assistance, carefully move
the assembled unit to its final
position. Attach the safety strap
to the wall, ensuring it is firmly
attached and secure.
Step 16
You will need
Phillips Head
Screwdriver
1 x Washer
(H19)
Screw and Wall Plug
are not provided.
Please use appropriate
fixtures for your wall.
(P1)
(P5)
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
4 x Wedges
(H13)
4 x Wedge
Screws (H14)
fantasticfurniture.com.au Page 12
H19
Screw
Wall
We strongly advise that
you use the wall safety
strap provided to prevent
the unit toppling.
Required
Two People