Fein Universal Sheet Metal Shear UBs 1.6 / 1.6c User manual

SERVICE
Toolserviceandmaintencancemustbeperformedonlybyqualified
repairpersonnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessaryto per-formthese repairs.Service orrepairs performed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “Authorized Warranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
April15,2004
UBs 1.6 / 1.6c
Universal Sheet Metal Shear

Fein Power Tools
UBs 1.6 / 1.6c Parts List
Item Item Number Description Reqd.
10 3-19-01-109-02-4 MOTOR HOUSING 1
20 3-28-16-051-00-1 ROD 1
30 3-28-05-152-00-9 SWITCH BUTTON 1
40 5-1-272-004-11-9 FIELD COIL 1
50 4-30-70-014-00-0 SCREW 2
60 3-14-28-114-00-8 AIR CONDUCTING RING 1
70 3-07-12-087-01-5 BRUSH HOLDER 2
75 3-07-17-193-00-0 BRUSH CAP 2
80 3-07-11-129-00-9 CARBON BRUSH 2
90 4-30-70-015-00-4 SCREW 2
100 3-07-01-060-00-0 REVERSING SWITCH 1
120 3-07-22-178-01-6 CAPACITOR 1
130 3-24-31-026-00-9 CABLE CLAMP 1
140 4-30-70-001-00-6 SCREW 2
150 3-24-27-108-01-6 COVER 1
160 4-30-70-003-00-3 SCREW 1
170 4-30-70-016-00-7 SCREW 2
180 3-07-07-101-01-2 CABLE 1
190 3-14-13-164-00-9 CABLE PROTECTING SLEEVE 1
250 5-3-272-005-11-5 ARMATURE 1
300 4-17-01-001-17-2 BALL BEARING 2
310 3-26-12-125-00-0 PACKING RING 1
320 4-30-70-026-00-6 SCREW 4
330 3-15-06-351-00-0 INTERMEDIATE BEARING 1
340 4-02-01-036-00-6 PIN 1
400 3-13-08-155-00-7 TOOL HOLDER HOUSING (UBS 1.6) 1
3-13-08-159-00-6 TOOL HOLDER HOUSING (UBS 1.6c) 1
410 4-26-15-142-00-8 RETAINING RING (UBS 1.6) 2
4-26-34-010-00-6 RETAINING RING (UBS 1.6c) 2
420 3-13-08-153-01-4 CUTTING BAR (UBS 1.6) 1
3-13-08-153-02-0 CUTTING BAR (UBS 1.6c) 1
430 4-30-33-089-04-8 SCREW (UBS 1.6) 4
4-30-33-090-04-0 SCREW (UBS 1.6) 4
440 3-13-08-150-00-9 BLADE (UBS 1.6) 1
3-13-08-151-00-8 BLADE (UBS 1.6C)
450 3-13-08-156-00-0 BOLT 1
460 3-13-08-154-00-3 GEAR HOUSING 1
470 4-17-05-006-00-6 NEEDLE BEARING 1
480 3-13-08-157-00-4 PLATE SPRING 1
490 4-30-35-019-05-9 SCREW 2
500 3-13-08-158-01-1 ECCENTRIC SHAFT 1
510 3-24-08-385-00-1 DISC 1
520 4-17-24-003-00-2 BEARING 1
530 3-24-08-386-00-4 DISC 1
540 4-17-01-202-01-8 BALL BEARING 1
550 3-13-08-160-00-8 THRUST PIECE (UBS 1.6c)
560 3-13-08-161-00-7 KNURLED SCREW (UBS 1.6c) 1
570 3-09-01-350-00-0 PRESSURE SPRING (UBS 1.6c) 1
580 3-13-08-162-00-0 BLADE HOLDER (UBS 1.6c) 1
590 3-13-08-163-00-4 HANDLE (UBS 1.6c) 1
600 3-13-08-164-00-2 SCREW (UBS 1.6c) 1
610 4-30-45-028-04-6 PIN SCREW (UBS 1.6c) 1
620 3-13-08-165-00-6 CHIP CUTTER (UBS 1.6c) 1
630 4-30-35-016-05-3 SCREW 2