Fermax MEET 1L User guide

MEET 1L Panel
INSTALLER'S MANUAL
ENGLISH Version
FERMAX ELECTRÓNICA S.A.U.
http://www.fermax.com
Version number: V1.3
MEET 1L Panel manual available at https://www.fermax.com/qr/meet/

Page 2
Copyright Notice
Fermax and Fermax MEET panel are trademarks of Fermax Electronica S.A.U. registered in
the European Union and other countries.
© FERMAX ELECTRÓNICA S.A.U., 2018.

Page 3
INDEX
1Product Introduction....................................................................................................... 4
1.1Overview................................................................................................................. 4
2Functions Introduction.................................................................................................... 5
2.1Call Tenant.............................................................................................................. 5
2.2IC Reader (Only panel with proximity reader) ........................................................ 5
3Configuration via Web Server ........................................................................................ 6
3.1Main Menu.............................................................................................................. 6
3.2General Settings..................................................................................................... 7
3.3Network Settings .................................................................................................... 8
3.4ACC........................................................................................................................ 9
3.5SIP Settings.......................................................................................................... 10
3.6Advance.................................................................................................................11
3.7Pin code.................................................................................................................11
3.8Log Out................................................................................................................. 12
4Installation.................................................................................................................... 13
4.1Installation height.................................................................................................. 13
4.2Installation Step Diagram ..................................................................................... 14
4.3Connectors ........................................................................................................... 15
4.4Technical Parameters........................................................................................... 16

Page 4
1Product Introduction
1.1 Overview
Slider
IC reader (Only for panel with reader)
Pushbutton for calling
Microphone
Speaker
High definition camera
Lighting for night vision with LEDs

Page 5
2 Functions Introduction
Call tenant
Open door, relay delay settings
Speech message for release lock
Door opened alarm
Tamper alarm
Alarm management by access control (only panel with proximity reader)
2.1 Call Tenant
Visitor push the pushbutton for calling in the 1L Panel, the ring back tone will be sent,
meanwhile the monitor will ring. The monitor will show video and conversation after answer,
then for 1L panel and release lock.
2.2 IC Reader (Only panel with proximity reader)
Tenants can access to their corresponding entrance by passing authorized IC card on the
card reader area, the door will open and sent speech message if succeeded.

Page 6
3 Configuration via Web Server
The 1Lpanel has an integrated web server, allowing for configuration changes.This web server
is accessed via the panel’s IP address.
The browser opens with the configured IP address of the panel. A screen opens requesting a
username and password.
NOTE:
Default IP: 10.1.1.2
Username: admin
Password: 123456
3.1 Main Menu
At main menu you can see the device name, IP address, MAC address, firmware vesion
information.

Page 7
3.2 General Settings
BLOCK: Block number the 1L panel belongs to, between 001 and 999 (default option 1).
ROOM: Apartment number with which the 1L panel communicates with, between 0001 and
9899 (default option 101).
PANEL NO.: Panel Number, between 1 and 9 (default option 1).
TYPE: 1L PANEL.
LANGUAGE: Select the desired language for the drop-down options (default option ENGLISH).
We need refresh webpage after we change language.
PANEL VOLUME: Select the desired value between 1 and 6, default option 4.
The volume of talking, speech is simultaneous.
VIDEO RESOLUTION: In order to fit the different type of Monitor, The default values 640×480
are usually used.
SIP DIVERT MODE:
SIMULTANEOUS: When the panel call tenant, the monitor and the SIP device ring at the same
time, which one answer, the other one stop ring.
SEQUENTIAL: When the panel call tenant, the monitor will ring about 25s if no answer, the SIP
device start to ring
FORMAT: Date format.
DATE: Setting the date of panel.
TIME: Setting the time of panel.
TIME ZONE: Setting the time zone of panel.
Select local time zone and save.
If the project without management software the installer can set date, time and time zone
manually. If the projecct with management software, the date and time of panel will
synchronizes automatically with management software. If the panel connect with internet and
without managemnet software, the date and time of panel will synchronizes with internet.
NOTE:Date and time cannot be saved after power loss, the time zone and date format can be saved.

Page 8
3.3 Network Settings
MEET allows the installer to define the IP range according to the projects needs making the
network management easier. MEET panel network mode is static mode. Ensure that each
device has a unique IP address in same installation. The devices (digital panel, monitor and
guard unit) will show IP conflict if there are same IP.
IP: IP address of the panel (default option 10.1.1.2).
SUBNET: Subnet mask of the panel (default option 255.0.0.0).
DEFAULT IP: Default gateway of the panel (default option 10.254.0.1).
DNS: DNS of the panel (default option 8.8.8.8).
P.M.SOFTWARE: Server IP address installs management software (default option10.0.0.200).
REGISTRY PIN: The password be used when the panel is registered in management
software.

Page 9
3.4 ACC
DOOR RELAY TIME: Time for lock-release relay remains active.
DOOR DELAY TIME: The time when the unlocked signal is sent to the start of the relay.
The delay time is useful when the lock is not close panel.
ADMIN CARD: Master card registered when there is no management software, the card of
tenant can be managed by the master card.
ACC ALARM: When the card open the door, the alarm status of monitor corresponding unit
can change to HOME mode.
ACC PIN: Without function.

Page 10
3.5 SIP Settings
ENABLE SIP: Enable or disable sip function.
SIP SERVER: SIP server IP address.
DOMAIN: Sip server domain.
OUTBOUND: Some servers are used when NAT.
STUN IP: Audio and video NAT traversing public network server IP.
STUN PORT: The port of audio and video NAT traversing public network server.
H.264: Video coding parameters.
SIP USER: The username of sip account.
SIP PINCODE: The password of sip account.
TALK TIME: Conversation duration, 120s, 300s, 600s, 1200s and 1800s.
RING TIME: Ring time, 35s, 45s, 60s, 90s and 120s optional.
NOTE: When the panel is a sip device, Use quick dial call SIP device or receive calling of other
SIP device, you need enable the SIP function.