Fermax VIDEO DIGITAL COLOR KIT User manual

Pag 24
Congratulations for buying a quality product. FERMAX
ELECTRONICA S.A.E. manufactures and sells its well known
prestigious equipment, designed to the most technologic and
aesthetic requirements. The components of this KIT have been
designed by Ramón Benedito, National Spanish Design Award
winner, and developed by FERMAX ELECTRÓNICA S.A.E.
We hope you will have many years of service from it.
If you wish further information about FERMAX, or make
any sugestion, contact us in the web (http:\\www.fermax.es).
ENGLISH

Pag 25
VIDEO DIGITAL COLOR KIT manual
INDEX
INTRODUCTION ................................................................................................ 26
THE CITYMAX COLOUR MONITOR ................................................................. 27
THE OUTDOOR PANEL .................................................................................... 27
MONITOR INSTALLATION ................................................................................ 28
OUTDOOR PANEL INSTALLATION .................................................................. 29
POWER SUPPLY INSTALLATION..................................................................... 31
OUTDOOR PANEL SETUP ................................................................................ 32
MONITOR CONFIGURATION ............................................................................ 32
OPERATION ....................................................................................................... 33
INSTALLATION DIAGRAMS .............................................................................. 34
KIT EXPANSIONS .............................................................................................. 37
How to add terminals ............................................................................. 38
How to add an Outdoor Panel ............................................................... 39
ACCESORIES..................................................................................................... 40
Extension call .......................................................................................... 41
Stair light Relay ....................................................................................... 41
Second door control ............................................................................... 42
Connection to TV set .............................................................................. 42
TROUBLESHOOTING HINTS ........................................................................... 43
TABLE OF SECTIONS ....................................................................................... 43
OUTDOOR PANELS INTERNAL WIRING ......................................................... 44

Pag 26
INTRODUCTION
The VIDEO DIGITAL COLOR KIT is an advanced Video Door Entry
professional system for simplified installation (no call wires), specially designed
to be installed in bungalows or small residential complexes. It is basically made
up of an Outdoor Panel, which is installed outside the house, and a Color
Monitor, installed inside. Moreover, the corresponding Power Supply must be
installed in an inner place.
VERY IMPORTANT NOTES:
The Power Supply should be installed on a hard
and flat surface, as inside the buiding as in the lobby,
etc... but always in inner places. It can be installed in
a DIN box for electric switches.
Before installing the VIDEO DIGITAL COLOR KIT,
install the cables needed to Monitor (or monitors),
Outdoor Panel and Power Supply, following the
installation diagram.
To install the Monitor, choose a hard and flat
surface, far away from direct heat sources (radiators,
heaters, ...) or very smoky environments (kitchens,
etc.). We advise to install the Monitor in a place
where the call could be heard all inside the house.
The Outdoor Panel is protected against humidity
and atmosferical agents. In adverse conditions with
permanently hard rain or salty environment, it is
recommended to install the Panel with a hood or under
shelter. Strong light coming straight into the camera
(against the light) will produce contrast and/or
brightness losses.

Pag 27
VIDEO DIGITAL COLOR KIT manual
FLAT MONITOR
HIGH RESOLUTION
2
1
1
2
HIGH RESOLUTION
COLOR CAMERA
Only in installations withAUXILIARY COLOR CAMERA
KIT or ADDITIONAL COLOR VIDEO PANEL (optional).
*
*
THE CITYMAX MONITOR
THE OUTDOOR PANEL
AMPLIFIER
mesh
Terminals for
CONNECTION
DOOR RELEASE
push button
2nd CAMERA
connection
BRIGHTNESS
control
COLOR
control
ON/OFF
switch
AUTO SWITCH-ON
push button
STAIRS LIGHT
push button
COLOR
CAMERA
module
CALL
Push buttons
CONFIGURATION
jumpers
Volume for
MONITOR
Volume for
OUTDOOR PANEL
PUSHBUTTON
connector

Pag 28
3.Once the wires are connected, plug in
the connector and place the Monitor as
shown above: 1 - 2 - 3 .
90º
FLAT MONITOR
HIGH RESOLUTION
2
1
FLAT MONITOR
HIGH RESOLUTION
2
1
2
1
3
4.To unhook the Monitor, insert the screw-
driver in the notch , turn it a few degrees
and slide up the Monitor.
Once the equipment is fully installed, the Monitor will need to be programmed
in order to assign it a call pushbutton. Follow the set up sequence shown in
page 32.
90º
1
2
3
1.60m
FROM THE
FLOOR
1.Use a plain screw-driver to separate the
base from the Monitor. Put it in, rotate
and slide the Monitor up.
2.Install the Monitor on a hard and flat
surface. Mark and drill the wall at the
holes in the base.
MONITOR INSTALLATION
The CityMax monitors allow a quick and easy installation, without neccesity
of doing any kind of building-work. Do not remove the screen protection film
until the Monitor is completely installed.

Pag 29
VIDEO DIGITAL COLOR KIT manual
1.7m
1.Before embedding the box, break the
flange where the cables will be passed
through.
2.Place the embedding box at the desired
height (1.7m aprox.). Make sure that the
box is totally flush with the wall.
OUTDOOR PANEL INSTALLATION
Follow the recommendations shown in this chapter to install the Outdoor
Panel correctly. Do not forget to remove the protective plastic film in the front
of the camera once the installation is finished.
3.Place the waterproof tapes supplied with
the KIT.
4.Use the hinges to connect the wires and
handle the Panel comfortably.

Pag 30
+18V 1.5A
50-60 H. 50VA MAX.
12V 1A
FUENTE ALIMENTACION
KIT DIGITAL
MADE IN SPAIN
+18V 1.5A
50-60 H. 50VA MAX.
12V 1A
FUENTE ALIMENTACION
KIT DIGITAL
MADE IN SPAIN
POWER SUPPLY INSTALLATION
Finally, the Power Supply must be placed in a place dry and safe from the
weather. Its DIN 6 format allows you to install it in any type box or directly on
the wall by using the wallplugs and screws supplied.
1.Drill 2 holes in the wall, place the
wallplugs and fasten the screws, fixing
the Power Supply to the wall.
2.The Power Supply can be fitted on a
DIN rail inside a box pressing it as shown
in figure.
MARIA
LORCA
HIGH RESOLUTION
COLOUR TELECAMERA
6.Close the Panel and fasten the screws
with the allen key supplied. Place the
covers to finish the installation.
5.Push up the houvre behind nameplate
the louvre and place the label. You can
use the labels supplied with the Outdoor
Panel.

Pag 31
VIDEO DIGITAL COLOR KIT manual
+18V 1.5A
50-60 H. 50VA MAX.
12V 1A
FUENTE ALIMENTACION
KIT DIGITAL
MADE IN SPAIN
FUENTE ALIMENTACION
KIT DIGITAL
220 - 240 V
MADE IN SPAIN
+ - +
3.The Power Supply can be unmounted
from the DIN rail by levering at the flange
with a flat screw-driver.
NOTE:
The Power Supply must be installed in a place dry and safe from
inclemency of weather. It is advisable to install it protected through a
thermo-magnetic circuit breaker at the main input.
4.Plug-in the wires in the corresponding
terminals following the installation
diagrams attached.
ING
* The jumper JP1 must be always
connected, except when having 2
Outdoor Panels, in which case the
jumper in one of them will be removed
(secondary).
* Select the language of the door open
message by means of JP2: english
(ING), french (FRA), spanish (ESP) and
german (ALE).
OUTDOOR PANEL SET UP
The Outdoor Panel must be set up depending on the type of installation,
using the jumpers in the rear side of the amplifier.
ESP
FRA
ALE
JP2
JP1

Pag 32
OPERATION
Once the VIDEO DIGITAL COLOR KIT has been installed, it is advisable to
check all its features.
Call
* When pressing the call pushbutton in the Outdoor Panel it produces an
electronic sound in the Monitor, which is activated to show the visitor in
the screen. The image must be clear, day and night, because of the
camera's lighting. You can watch the visitors without letting them know if
the apartment is inhabited.
MONITOR CONFIGURATION
Before programming, the system must be fully wired, the handset on hook
and the Monitor connected as shown below.
HIGH RESOLUTION
COLOUR TELECAMERA
J1
PRG
J1
PRG
1.Put the jumper J1 to the
PRG position. A
confirmation sound will
be heard.
2.Press the button which
will identify the Monitor.
Once again confirmation
is generated.
3.Put back the jumper
back to its original
position and hang up the
Monitor.
Time between steps 1 and 2 must not be longer than 2 minutes. In case this
would occur, put back the jumper to its original position and restart the sequence.

Pag 33
VIDEO DIGITAL COLOR KIT manual
NOTE:
* For normal use of the Monitor, the switch must be in the ON
position. When the Monitor is not going to be used for a long time,
switch off the monitor using this switch.
* In installations with additional terminals (monitors and/or telephones),
the call activates all the terminals (call tone and video). When picking
up one of the handsets the communication channel with the Outdoor
Panel is opened, and the rest of terminals are blocked. From the blocked
monitors, the only function available will be the auto switch-on
1
.
* The spoken message when releasing the lock is selectable from 4
different languages (see page 31). If it is not needed, the message may
be cancelled.
* Picking up the handset you can hold a conversation with the visitor up to
a maximum of 90 seconds, or until you hang up the handset.
* Pressing the button you will release the door lock, giving access to
the visitor. When the door opening is produced, a spoken message can
be heard: "The door is opened. Please, close the door behind you.".
Reconnect a call
* At any time, you can re-stablish communication with the Outdoor Panel
by pressing
1
and picking up the handset.
Auto switch-on
* You can also activate the Monitor at will by pressing the auto switch-on
1
, obtaining the image from the Outdoor Panel. This feature allows
you to control the area covered by the camera whenever you need
(vigilance and watching functions). The Monitor will switch-off
automatically after 30 seconds.
If the system does not work correctly check out the chapter TROUBLE
SHOOTING HINTS in page 43 of this manual.

Pag 34
LE
T
T
-A
+A
Ct
-
L
+
-+-+
Vac
EXT.
INT.
1
-+
CT VM
Ct L S B B Ab Ab -+ XX
V
M
M
V
INSTALLATION DIAGRAMS
The following are the installation diagrams for the VIDEO DIGITAL COLOR
KIT 1, 2 and 3 lines. Check suitable wire sections with the table on page 43.
Do not forget that the monitors must be programmed with their apartment
numbers, following the sequence shown in page 32.
Wiring for FERMAX VIDEO DIGITAL COLOR KIT 1/L REF.6047
In installations up to 40 meters from the outdoor panel up to the monitor, the blue
wire in this diagram schematic can be ignored.

Pag 35
VIDEO DIGITAL COLOR KIT manual
-+-+
LE
T
T
-A
+A
Ct
-
L
+
V
M
M
V
LE
T
T
-A
+A
Ct
-
L
+
V
M
M
V
2
1
Vac
EXT.
INT.
12
-+ CT VM
Ct L S B B Ab Ab -+ XX
Wiring for FERMAX VIDEO DIGITAL COLOR KIT REF.6071
CUT THIS
RESISTOR
In installations up to 40 meters from the outdoor panel up to the furthest monitor,
the blue wire in this diagram schematic can be ignored.
In split installations put a 10 Khoms resistor between "+" y "L" terminals in the last
monitor. This kit comes with a bag including 5 resistors.

Pag 36
-+-+
LE
T
T
-A
+A
Ct
-
L
+
V
M
M
V
1
LE
T
T
-A
+A
Ct
-
L
+
V
M
M
V
2
LE
T
T
-A
+A
Ct
-
L
+
V
M
M
V
3
1
2
3
Vac
EXT.
INT.
-+
CT VM
Ct L S B B Ab Ab -+ XX
Wiring for FERMAX VIDEO DIGITAL COLOR KIT REF.6073
CUT THIS
RESISTOR
CUT THIS
RESISTOR
In installations up to 40 meters from the outdoor panel up to the furthest monitor,
the blue wire in this diagram schematic can be ignored.
In split installations put a 10 Khoms resistor between "+" y "L" terminals in the last
monitor. This kit comes with a bag including 5 resistors.

Pag 37
VIDEO DIGITAL COLOR KIT manual
1
2
HIGH RESOLUTION
FLAT MONITOR
HIGH RESOLUTION
CCD CAMERA
PAN &TILT
KIT EXPANSIONS
The FERMAX VIDEO DIGITAL COLOR KIT can be expanded with additional
color monitors (REF.6051) or B/W ones (REF.6070) or telephones (REF.2451)
in the same apartment following the connections shown in the next page.
It is also possible to install an additional Outdoor Panel (see wiring details
on page 39) or an auxiliary camera.
Another extension example for
the DIGITAL KIT would be to install
aditional telephones in different
areas of the apartment (kitchen or
bedrooms), allowing to use the
talk-listen and door control functions
within the buiding (see backpage for
wiring detail).
1
2
HIGH RESOLUTION
FLAT MONITOR
1
2
HIGH RESOLUTION
FLAT MONITOR
HIGH RESOLUTION
CCD CAMERA
PAN &TILT
2
1
1
2
HIGH RESOLUTION
FLAT MONITOR
The DIGITAL KIT 2/L can be also
improved by adding terminals in one
of the apartments without affecting
a neighbour's Monitor (see
backpage for details).
1
2
HIGH RESOLUTION
FLAT MONITOR
HIGH RESOLUTION
CCD CAMERA
PAN &TILT
1
2
HIGH RESOLUTION
FLAT MONITOR
One possibilty is to install an
additional monitor in another area of
the apartment so you can use the
system without going to the main
Monitor (see backpage for wiring
detail).

Pag 38
LE
T
T
-A
+A
Ct
-
L
+
CN1
PRG
LE
T
T
-A
+A
Ct
-
L
+
CN1
PRG
+
L
V
M
M
V
V
M
M
V
REF.2448
DISTRIBUIDOR VIDEO 2 SALIDAS
2 OUTPUTS VIDEO DISTRIBUTOR
M
R1
+18
75
MV
6
3
+
4
2
VMV
15
V M
LE
T
T
-A
+A
Ct
-
L
+
CN1
PRG
LE
T
T
-A
+A
Ct
-
L
+
CN1
PRG
+
L
V
M
M
V
V
M
M
V
LE
T
T
-A
+A
Ct
-
L
+
CN1
PRG
V
M
M
V
-
T
-A
T
+A +
L
L
+
-
106CI06B
How to add terminals
The standard equipment in each apartment can be extended to a maximum
of 2 telephones or 1 additional monitor, without adding power supplies.
LE
T
T
-A
+A
Ct
-
L
+
CN1
PRG
LE
T
T
-A
+A
Ct
-
L
+
CN1
PRG
V
M
M
V
V
M
M
V
Extension with additional telephone
ADDITIONAL TELPHONE
MAIN MONITOR ADDITIONAL MONITOR
MAIN
MONITOR
MAIN
MONITOR
ADDITIONAL
MONITOR
Extension with additional Monitor (option 1)
* To install an additional monitor in the apartment you must use one of the
3 options shown, depending where the Monitor is placed in the last
apartment (option 1), or in a intermediate apartment (options 2 & 3).
* Any additional terminal (telephone or monitor) must be programmed once
CUT
RESIST.
CUT
RESIST.
CUT
RESIST.
Extension with additional Monitor and distributor (option 2)
CUT
RESIST.
MONITOR
ADDITIONAL
MONITOR
Extension with additional Monitor without distributor (option 3)
CUT
RESIST.

Pag 39
VIDEO DIGITAL COLOR KIT manual
it has been installed (see page 32), assigning one of the pushbuttons in
the Outdoor Panel.
* The resistor in the connector must be cut in all the monitors with 2 coaxial
cables connected. Do not cut it when only one coaxial is connected.
NOTE:
Terminals can only be programmed from the main panel (JP1 connected).
Vac
INT.
EXT.
INT.
EXT.
ALIMENTACION
FUENTE DE
REF.6062
Vac
-+-+
+-
AMPLIFICADOR ADS AMPLIFICADOR ADS
1 1
-+
CT VM
S+LVM +L
Vi Mi
MoVo
L
+
+
CT
-
MV
+
L
-
BXCt SLAbBAb
+X-
BXCt SLAbBAb
+X
VoViVS
SALIDA VIDEO
VIDEO OUTPUT
VIDEO EXTERIOR
EXTERNAL VIDEO
REF.2450
PACK CAMBIADOR VIDEO ADS
ADS VIDEO SWITCHER PACK
PANEL VIDEO
VIDEO PLACA
1
2
HIGH RESOLUTION
FLAT MONITOR
HIGH RESOLUTION
CCD CAMERA
PAN &TILT
HIGH RESOLUTION
CCD CAMERA
PAN &TILT
ADDITIONAL PANEL MAIN PANEL
V
M
M
V
75 Ohm
V
M
M
V
75 Ohm
Wiring for ADDITIONAL COLOR VIDEO PANEL KITS
How to add an Aditional Outdoor Panel
It is possible to extend the DIGITAL KIT by installing an Aditional Outdoor
Panel at another access to the building (service gate, garage, etc...). Depending
on the type of aditional Panel (video or audio) you will be able to use the
ADITIONAL VIDEO PANEL KITS (REF.6075, REF.6077 Y REF.6079) and
ADITIONAL AUDIO PANEL KITS (REF.6056, REF.6057 Y REF.6058) for 1, 2
and 3 lines respectively.
The wiring of these ADITIONAL PANEL KITS are idependent from the number
of lines. Therefore, the diagrams shown can be used for every VIDEO DIGITAL
COLOR KIT.
TO THE MONITOR
Cut the resistor.Do NOT cut the resistor.
Do not
connect
JP1
Connect
JP1

Pag 40
Vac
INT.
EXT.
INT.
EXT.
ALIMENTACION
FUENTE DE
REF.6062
Vac
-+-+
TELECAMARA
+-
AMPLIFICADOR ADS AMPLIFICADOR ADS
1
1
-+
CT VM
L
+
-
BXCt SLAbBAb
+X-
BXCt SLAbBAb
+X
-
Wiring for ADDITIONAL AUDIO PANEL KITS
TO THE MONITORS
MAIN PANEL
ADDITIONAL PANEL
1
2
HIGH RESOLUTION
FLAT MONITOR
HIGH RESOLUTION
CCD CAMERA
PAN &TILT
NOTE:
Terminals can only be programmed from the main panel (JP1 connected).
* SURFACE BOX (REF.8951, 8954 y 8955): To install the Outdoor Panel
in places where there is no possibility of flushing in the wall (marble, thin
walls, etc.)
* CONVERSION FRAMES (REF.8991, 8994 y 8995) Used for covering the
gap in the wall from previous installations.
* ELECTRONIC EXTENSION CALL (REF.2040) See next page.
* STAIRS LIGHT RELAY (REF.2013) See pages 41 and 42.
* LIGHT COMMANDER (REF.8053) Allows to activate buzzers and devices
supplied with 220 Vac.
* CORNER BOX (REF.8378, 8381 y 8382) To improve the orientation of
the Outdoor Panel when it is installed in places with difficult access.
ACCESORIES
The following are some examples of FERMAX accesories that can be used
with the KIT, and some examples of typical installations with these devices.
Connect
JP1
Do not
connect JP1

Pag 41
VIDEO DIGITAL COLOR KIT manual
LE
T
T
-A
+A
Ct
-
L
+
CN1
PRG
34
STAIRS LIGHT RELAY
RELE LUZ DE ESCALERA
REF. 2013
43 Max. 2A
LE +
V
M
M
V
Extension call
The electronic extension call (REF.2040) is used for extending the call sound
in a place different from the one where the Monitor is installed, for instance in
the garden.
Stairs light relay
The relay (Ref.2013) is used to activate an external device as stair or garden
light, by means of the pushbutton in the Monitor .
LE
T
T
-A
+A
Ct
-
L
+
CN1
PRG
V
M
M
V
1
2
HIGH RESOLUTION
FLAT MONITOR
HIGH RESOLUTION
CCD CAMERA
PAN &TILT
MONITOR
MONITOR
1
2
HIGH RESOLUTION
FLAT MONITOR
HIGH RESOLUTION
CCD CAMERA
PAN &TILT
REF.2040
TO THE STAIRS
PUSHBUTTON

Pag 42
LE
T
T
-A
+A
Ct
-
L
+
CN1
PRG
34
STAIRS LIGHT RELAY
RELE LUZ DE ESCALERA
REF. 2013
43
Max. 2A
LE
+
Ref. 2911
Ref. 2986
220Vac/12 Vac
220 Vac 12 Vac
V
M
M
V
Second door control
The relay (Ref.2013) can also be used to control the release of a second
door where there is no outdoor panel by means of the stair light pushbutton on
the Monitor .
1
2
HIGH RESOLUTION
FLAT MONITOR
HIGH RESOLUTION
CCD CAMERA
PAN &TILT
MONITOR
Connection to TV and video
The Monitor can be connected directly to a TV set with an
EUROCONNECTOR, so that the image from the Outdoor Panel is shown on
the TV.
17
1
3
5
7
9
11
13
15
19 20
18
16
14
12
10
8
6
4
2
LE
T
T
-A
+A
Ct
-
L
+
CN1
PRG
V
M
M
V
1
2
HIGH RESOLUTION
FLAT MONITOR
HIGH RESOLUTION
CCD CAMERA
PAN &TILT
EUROCONNECTOR
CUT
RESIST.

Pag 43
VIDEO DIGITAL COLOR KIT manual
TROUBLESHOOTING HINTS
Some typical problems may be easily solved if you follow closely this chapter
and you do the tests shown in the following steps.
The image does not appear in the Monitor
1. Check that the Monitor is switched on (on/off switch).
2. Check that the power supply is correctly connected, and the voltage is 18
Vdc between terminals "+" and "-".
3. Verify that there is no short between "V" and "M" in the coaxial cable.
4. Make sure that the Monitor has already been PROGRAMMED (see
page 32).
The Monitor cannot be programmed
1. Check that the JP1 jumper in the Outdoor Panel is in place.
2. Check that the voltage is correct at the Outdoor Panel and the Monitor,
(18 Vdc between terminals "+" and "-").
TABLE OF SECTIONS
The section of the wires used in the installation affects the funcionallity and
quality of your KIT. It is very important to follow the minimum sections shown in
the table below. For small installations (less than 100m) FERMAX recommends
its cable REF.3100.
COAXIAL
RG59
DISTANCE
(meters) SECTION
150 to 200
100 to 150
up to 100 75 Ohm
75 Ohm
75 Ohm
1 mm2
2 mm2
1.5 mm2
In case you would want to install additional terminals in the future, it is
advisable to use a section larger than the one shown in this table.