Fiamma Caravanstore Operating and maintenance manual

®
®
fiamma.comfiamma.com
MARKISEN
AWNINGS
STORES
TENDALINI
TOLDOS
Montage und
Gebrauchsanleitung
Installation
and use instructions
Instructions de montage
et mode d’emploi
Instrucciones
de montaje y uso
Istruzioni
di montaggio e d’uso
DE
EN
FR
ES
IT
A0_IS_98690-840_revA
FIAMMASTORE
®
“More information https://www.caravansplus.com.au"

2
®
®
Um die Markise optimal nutzen zu k , lesen Sie bitte die Bedienungsan-
leitung aufmerksam durch und bewahren sie zur sp
To use the awning in the best way, read the user’s instructions carefully and
keep them on hand for consultation in the future.
Pour tirer le meilleur parti de votre store, nous vous invitons
d’emploi et les conserver pour toute consultation ult
önnen äteren Verwendung gut auf.
lire attentive-
ment les notices érieure.
à
à
Para usar el toldo en lo mejor de los modos, os invitamos a leer atentamente
las instrucciones de uso, guardandolas en caso de necesidad.
Per utilizzare al meglio il tendalino, vi invitiamo a leggere attentamente le
istruzioni d’uso e a conservarle in caso di necessita’.
DE
EN
FR
ES
IT
VERPACKUNGSINHALT
PACKAGE CONTENTS
CONTENU DE L’EMBALLAGE
CONTENIDO DEL EMBALAJE
CONTENUTO DELL’IMBALLO
DE
EN
FR
ES
IT
Standard 440
CARAVANSTORE SUPPORT LEG
4x
®
®
2x
1x
2x
2x
2x
G
I
H
CDEF
2x
Standard 410-440
440
RAFTER CARAVANSTORE
1x
410
1x
2x
Optional 190-360
1x1x
“More information https://www.caravansplus.com.au"

®
®
3
DE
EN
FR
ES
IT
MONTAGEANLEITUNG
INSTALLATION INSTRUCTION
INSTRUCTIONS DE MONTAGE
INSTRUCCIONES DE MONTAJE
ISTRUZIONI DI MONTAGGIO
2
WIR EMPFEHLEN, DIE FOLGENDE ABLÄUFE
ZU ZWEIT AUSZUFÜHREN.
WE RECOMMEND THE FOLLOWING OPERATIONS
ARE CARRIED OUT BY 2 PEOPLE.
NOUS VOUS CONSEILLONS
D’EFFECTUER LES OPERATIONS
SUIVANTES EN 2 PERSONNES.
ACO SEJAMOS EFECTUAR
LAS SIGUIENTES OPERACIONES
EN 2 PERSONAS.
CONSIGLIAMO DI EFFETTUARE
LE FASI SEGUENTI IN 2 PERSONE.
DE
EN
FR
ES
IT
23
1
OK!
NO!
Das Kederschienenende leicht
weitern, bei Bedarf auch entspre-
chend in der Rundung vornehmen.
Widen the opening and the curved
parts of the caravan rail.
Elargissez le rail à l’ouverture etau
niveau des zones courbes.
Ampliar la parte inicial y las partes
curvas de la canalina.
Allargare la canalina all’imbocco
ed in corrispondenza delle curve.
DE
EN
FR
ES
IT
IMPORTANT WICHTIG CUIDADO IMPORTANTE
“More information https://www.caravansplus.com.au"

4
®
®
DE
EN
FR
ES
IT
Die Markise hat serienmässig 2 Stossdämfper enthalten, welche in Position der
Rafter, bei Anbringung der Rafter Caravanstore oder Caravanstore Support Leg,
angebracht werden. Es wird empfohlen, die im Lieferumfang enthaltenen
Stossdämpfer ( ) hinten am Markisensack anzubringen.
The awning comes standard with 2 Shock Absorbers fixed at the points of
support of the Rafters ; if you need to put the Rafter Caravanstore or the
Caravanstore Leg Support, we suggest you to fix the the standard delivered ( )
Shock Absorbers on the back of the bag.
Le store est équipé de série de 2 Absorbeurs de Choc fixés en correspondance
des zones d’appui du tendeur de toile Rafter. En cas d’installation du Rafter
Caravanstore ou du Caravanstore Support Leg, nous vous conseillons
d’appliquer sur l’arrière de la housse les Absorbeurs de Choc ( ) en dotation.
El toldo viene de serie con 2 amortiguadores fijados a nivel de los soportes de
los Rafter, si es necesario poner el Caravanstore Rafter o la Caravanstore
Supoort Leg, se recomienda la aplicación de los amortiguadores ( ) suministra-
dos de serie en la parte trasera de la bolsa.
Il tendalino ha di serie i 2 Assorbitori d'Urto fissati in corrispondenza degli
appoggi Rafter; in caso si debba mettere il Rafter Caravanstore o Caravanstore
Support Leg, consigliamo di applicare posteriormente sulla sacca gli Assorbitori
d'Urto ( ) in dotazione.
I
I
I
I
I
45
STOP
“More information https://www.caravansplus.com.au"

®
®
5
I
6DE
EN
FR
ES
IT
STOSSDÄMPFER
SHOCK ABSORBER
ABSORBEUR DE CHOC
ABSORBEDOR DE GOLPE
ASSORBITORE D’URTO
CARAVANSTORE 440
CARAVANSTORE 410
CARAVANSTORE
SUPPORT LEG
RAFTER CARAVANSTORE
CARAVANSTORE
SUPPORT LEG
1x 2x
“More information https://www.caravansplus.com.au"

M3x12
7
1
2
7 bis
3,5 mm3,5 mm
M4,2x9,5
LÖSUNG 1
SOLUTION 1
SOLUTION 1
SOLUCION 1
SOLUZIONE 1
DE
EN
FR
ES
IT
LÖSUNG 2
SOLUTION 2
SOLUTION 2
SOLUCION 2
SOLUZIONE 2
DE
EN
FR
ES
IT
E
F
6
®
®
“More information https://www.caravansplus.com.au"

GEBRAUCHSANLEITUNG
INSTRUCTIONS FOR USE
MODE D’EMPLOI
MODO DE EMPLEO
ISTRUZIONI D’USO
DE
EN
FR
ES
IT
®
®
7
1
2
“More information https://www.caravansplus.com.au"

8
®
®
3
STOP
4
Das Tuch komplett ausrollen.
Completely unroll the fabric.
Dérouler complètement la toile.
Desenrollar completamente la lona.
Srotolare completamente il telo.
DE
EN
FR
ES
IT
Die Stützfüsse komplett ausziehen und zusammen, durch Drehen des
Stiftes und ohne Kraftaufwand, absenken.
Pull the legs completely out, and, lower them
together to the ground simply by turning on pins
and without forcing.
Extraire complètement les pieds
d’appui, les baisser en direction du sol en
les faisant tourner simplement sur les pivots,
sans forcer.
Extraer las patas completamente y, juntas,
bajarlas a la tierra solo girándolas sobre los pernios sin forzar.
Estrarre le paline completamente e, insieme, abbassarle a terra ruotandole
semplicemente sui perni e senza forzare.
DE
EN
FR
ES
IT
“More information https://www.caravansplus.com.au"

®
®
9
A
B
B
5
6
AB
1
2
B
B
Den Stützfuß A festhalten, dabei den Rafter B anheben und ausziehen, bis das
Rafterende in die Kunststoffauflage (Spannarmauflage) fest aufliegt.
Keeping the leg A still, lift and extend the Rafter B till inserting it in the
plastic housing.
Maintenez immobile le pied A, soulevez et étendez le Rafter B jusqu’à ce
qu’il s’insère dans l’emplacement en plastique
Manteniendo la pata A parada, levantar y extender el Rafter B hasta
introducirlo en el kit soporte rafter de plástico.
Tenendo ferma la palina A, sollevare ed estendere il Rafter B fino
all'inserimento nella sede in plastica.
DE
EN
FR
ES
IT
“More information https://www.caravansplus.com.au"

10
®
®
B
7
8
B
A
9
A
DE
EN
FR
ES
IT
Den Stützfuß A in der
gewünschten Höhe
ablassen.
Lower the leg A to the
desired height.
Abaisser le pied d’appui
A à la hauteur désirée.
Bajar la pierna A a la
altura deseada.
Abbassare la palina A
alla altezza desiderata.
DE
EN
FR
ES
IT
Zum Schliessen der Markise die Schritte 1-9 in entgegengesetzter
Reihenfolge wiederholen.
To close the awning, repeat steps 1-9, backwards.
Pour fermer le store, répéter les étapes 1-9, en sens inverse.
Para cerrar el toldo, repetir los pasos 1-9, en sentido contrario.
Per chiudere il tendalino, ripetere le fasi 1-9, al contrario.
DE
EN
FR
ES
IT
Den Rafter ausziehen und spannen, bis das
Tuch ausreichend gespannt ist.
Tighten the rafter until the fabric is sufficiently
taut.
Mettre en tension le rafter jusqu’à ce que la toile
soit suffisamment tendue.
Poner en tensión el rafter hasta que la lona esté
completamente tendida.
Tensionare il rafter fino a quando il telo è
sufficientemente teso.
“More information https://www.caravansplus.com.au"

®
®
11
GH
DE
EN
FR
ES
IT
ANBRINGUNG DES ZUBEHÖRS ZUR SPANNUNG DER MARKISE
INSTALLATION OF AWNINGS TENSION ACCESSORIES
INSTALLATION DES ACCESSOIRES POUR UNE TENSION OPTIMALE DE L’AUVENT
INSTALACION DE LOS ACCESORIOS PARA DESPLEGAR EL TOLDO
MONTAGGIO DEGLI ACCESSORI PER IL TENSIONAMENTO DEL TENDALINO
D
“More information https://www.caravansplus.com.au"

12
®
®
DE
EN
FR
ES
IT
ANBRINGUNG DER SPANNARMAUFLAGE
INSTALLATION OF WALL BRACKETS
INSTALLATION DES PIEDS DE SUPPORT SUR LA PAROI
INSTALACION DE LOS ENGANCHES EN LA PARED
MONTAGGIO DEGLI ATTACCHI A PARETE
WANDHALTERUNGS-
KIT FÜR STÜTZFÜß
WALL HOOKING LEGS KIT
ETRIERS DE SUPPORT
POUR PIEDS
KIT ENGANCHE PATAS
EN LA PARED
KIT ATTACCO PALINA
A PARETE
DE
EN
FR
ES
IT
Ø 10 mm
5x30 mm
SIKAFLEX
C
“More information https://www.caravansplus.com.au"

®
®
13
1
2
STOP
WIR EMPFEHLEN, DIE FOLGENDE ABLÄUFE ZU ZWEIT
AUSZUFÜHREN.
WE RECOMMEND THE FOLLOWING OPERATIONS ARE CARRIED
OUT BY 2 PEOPLE.
NOUS VOUS CONSEILLONS D’EFFECTUER LES OPERATIONS
SUIVANTES EN 2 PERSONNES.
ACONSEJAMOS EFECTUAR LAS SIGUIENTES OPERACIONES
EN 2 PERSONAS.
CONSIGLIAMO DI EFFETTUARE LE FASI SEGUENTI IN 2 PERSONE.
DE
EN
FR
ES
IT
“More information https://www.caravansplus.com.au"

14
®
®
45
3
D
12
3
“More information https://www.caravansplus.com.au"

®
®
15
I
Eine Markise ist ein Sonnenschutz, deshalb muss sie bei
kräftigem Wind, starkem Regen oder Schnee, eingefahren werden! Wenn
es regnet die Markise neigen damit das Wasser ablaufen kann und die
Spannstange “RAFTER” montieren.
Remember that the awning was designed to protect from the sun, and not
from rain, wind or snow. In these cases, we recommend that it will be
rolled up! In case of moderate rain, incline the awning for the drainage of
water and install the special tension RAFTER.
Un store est conçu pour protéger du soleil et de ce fait il doit être enroulé
lors d’intempéries! En cas de pluie incliner le store afin que l’eau puisse
s’écouler et monter le spécial tendeur de toile “RAFTER”
El toldo ha sido creado para protegerse del sol y no de la lluvia, en estos
casos se aconseja inclinar el toldo para que el agua fluya y enganchar el
rafter. En caso de lluvia intensa, viento o nieve se aconseja cerrarlo.
Ricordare che il tendalino è stato concepito per ripararsi dal sole e non
dalla pioggia; in questo caso si consiglia di inclinare il tendalino per
favorire il deflusso dell’acqua e montare il RAFTER. In caso di forte
pioggia, vento o neve si consiglia di chiuderlo.
ANBRINGUNG DER RAFTER
FÜR DIE CARAVANSTORE
INSTALLATION OF AWNING
TENSION RAFTERS FOR
CARAVANSTORE
INSTALLATION DES
TENDEURS DE TOILE POUR
LE STORE CARAVANSTORE
INSTALACION DE LOS
RAFTER PARA LA
CARAVANSTORE
MONTAGGIO DEI RAFTER
PER LA CARAVANSTORE
DE
EN
FR
ES
IT
DE
EN
FR
ES
IT
RAFTER CARAVANSTORE
IMPORTANT WICHTIG CUIDADO IMPORTANTE
“More information https://www.caravansplus.com.au"

16
®
®
RAFTER
CARAVANSTORE
CARAVANSTORE
SUPPORT LEG
RAFTER CARAVANSTORE
Standard 440 Optional 255-410
“More information https://www.caravansplus.com.au"

®
®
17
4
5
6
CARAVANSTORE
Standard 360-440
SUPPORT LEG
“More information https://www.caravansplus.com.au"

20
®
®
MAINTENANCE INSTRUCTIONS
EN
All our awnings ‘Made in Italy’ and manufactured following high standards.
Apart from our strict quality controls, we also have our fabrics continuously controlled
by inependent institutes to ensure that the fabric is tear resistant, they can hold the
weight of water, the colours don’t fade and it is resistent against atmospheric agents. In
order to enjoy your awning for a long time, even for many years after the purchase
date, we ask you to take note of and follow the simple advices below:
The awnings are made with precision, but some of the characteristics of the materials
, which could be interpreted as defects, derive from the
materials and from the specific work processes, and these characteristics occur even
though Fiamma uses advanced and innovative machines production techniques.
Make sure that your awning is completely dry and clean before closing it.
The remaining humidity could cause stains. If however you have no choice but closing
the awning when it is still wet, make sure to open it for drying within 12 hours
maximum.Most of the dirt is superficial and can be removed with clean water and a
cloth or a brush. If the fabric is very dirty, add some light cleaning detergent. Be aware
never to use any aggressive chemical substances and never to clean the fabric with a
high pressure machine. We recommend not to use the awning at a temperature below
0°C.
To guarantee a perfect quality, the fabrics are waxed or laminated several times.
During this operation, single coloured pigments could move and thus create small
bright spots in the material, which are only irregularities that are technically inevitable
to avoid, but do not influence the impermeability of the fabric.
During the production of the material, small creases could form, which especially on
bright fabric in backlight could seem dark. Bright stripes (the so called white crease) are
inevitable with these materials.
With time the influence of weather could cause change in colour.
MAINTENANCE INSTRUCTIONS
(as little imperfections on paint or linearity of aluminium profiles; little marks or light
deformations of plastic parts)
·
·
·
· All Fiamma fabrics are soldered on the front bar for a high resistance to water : in case
of rain little drops of water may form near the front bar and this may happen when the
awning is open as well, this doesn’t compromise awning’s functionality.
OF FABRIC.
The fabric is therefore completely hermetic, also in these spots.
“More information https://www.caravansplus.com.au"

®
®
21
WARRANTY FIAMMA
EN
We recommend the installation of the Shock Absorbers standard delivered ( ).
Before using the caravanstore, check with your local dealer, in order to be sure
the wall of your caravan is sturdy enought. Fiamma declines any responsibility
for possible damage to lightweight walls caused during the use.
We also recommend to remove the awning
after use and do not travel with the awning
fixed on the vehicle.
I
EN
1
2
3
4
5
6
. FIAMMA products have a guarantee of 24 months from the date the product is
purchased by the final consumer.
.
FIAMMA warranty covers claims for damages that are due to defective material or
production failures.
. The warranty is not valid under the following circumstances: natural wear of the
product, if proper installation instructions have not been followed, in cases of
negligence or improper use, if non original FIAMMA spare parts have been used, if the
damage comes from transporting the product with improper packaging not authorised
by FIAMMA, in case of intervention by a non qualified person, or when the final user or
anyone else has modified the product without the proper authorisation of FIAMMA.
. If the claim is covered under warranty, FIAMMA reserves the right to decide
whether to repair or replace the defective part(s).
. The claim should be submitted to the supplier, from which the product was originally
purchased. It is vital to always provide the following information: serial number of the
product, proof of purchase (FIAMMA could ask for a copy) and a precise description of
the damage (together with some digital photos to help substantiate the claim). In case
of false or incomplete information, FIAMMA reserves the right to refuse the claim.
. FIAMMA reserves the right to ask for return of the products in order to verify the
warranty claim. The cost and risks/insurance of transportation is to be paid by the client.
If the warranty request is then verified, FIAMMA will pay for the transport, i.e. cost of
sending and returning the part, as well as costs for repairing/replacing the part. If the
warranty claim is not accepted, the cost of repair and replacement of the part or
product, as indicated beforehand by the client, will be paid by the client.
The warranty covers only the product, and not possible damages caused by an
improper use.
“More information https://www.caravansplus.com.au"

28
®
®
ERSATZTEIL SPARE PARTS
PIECES DETACHEES RECAMBIOS
DGB
F
I
E
RICAMBI
190-225-255
013
“More information https://www.caravansplus.com.au"