Fisher-Price 77198 User manual

®
Model Number 77198
lease save these instructions for future reference.
• Adult assembly is required.
• Tool needed for assembly: Phillips Screwdriver.
• This product requires three, size "C" (LR14) alkaline batteries (not included).
P
P
™
™

P
Parts arts
#6 x 5/8" Screw - 8
SHOWN ACTUAL SIZE
CAUTION
Please keep small parts and plastic
bags out of children's reach.
Dispose of plastic bags properly.
Drawbridge Base
Parts not shown: 5 figures, label sheet.
Small Turret
Small Turret Top
2 Flags Turret Top
Large Turret
Large Turret Top
Dungeon
Base
Ladder
2nd Floor
DoorBars
Cannon
3 Cannon Balls
2

1
12
2
Back View
• Position the drawbridge base on a flat surface so
that the back faces you.
• Position the small turret so that the back faces
you. Insert and snap the small turret tabs into the
drawbridge base slots.
• Position the small turret top so that the decorated
side is upright. Fit and snap the small turret top
slots onto the small turret tabs.
• Insert a screw through the small turret top, small
turret and into the drawbridge. Tighten the screw
with a Phillips screwdriver. Do not over-tighten.
• Insert a flag into the hole in the small turret top.
• Position the 2nd floor so that the decorated side is
upright. Insert the 2nd floor between the ridge
and three tabs on the inside of the large turret.
• Insert three screws through the 2nd floor and into
the large turret. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
• Position the large turret top so that the decorated
side is upright. Fit and snap the large turret top
slots onto the large turret tabs.
• Insert a flag into the hole in the large turret top.
Drawbridge
Base
Small
Turret
Large Turret
Small
Turret Top
Large Turret Top
Flag
Flag
2nd Floor
Ridge
Tab
Tabs
Tabs
Tabs
3
A
As ss se em mb bl ly y
Back View Back View
Back View

3
3
5
5
4
4
• Place the dungeon base on a flat surface with the
back facing you.
• At an angle, insert one of the pegs on the bars into
one of the holes in the dungeon base, as shown.
Insert and snap the other peg on the bars into the
other hole in the dungeon base.
• Insert the tab on the drawbridge assembly into the
slot in the dungeon base.
• At an angle insert one of the pegs on the door into
one of the holes in the dungeon base, as shown.
Insert and snap the other peg on the door into the
other hole in the dungeon base.
• Tip the assembly face down.
• Insert three screws through the bottom of the
dungeon base and into the drawbridge assembly.
Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
• Turn the assembly upright.
• Position the large turret so that the back faces
you. Insert and snap the large turret tabs into
the dungeon base slots.
Drawbridge
Assembly
Drawbridge
Assembly
Drawbridge
Assembly
Dungeon Base
Dungeon
Base
Dungeon
Base
Tab
Slot
Large Turret
Tabs
Door
Bars
4
A
As ss se em mb bl ly y
Back View
Back View
Back View
Back View
Bottom View
Bottom View

Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, stan-
dard (carbon-zinc) or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use.
Always remove exhausted batteries from the toy.
Battery leakage and corrosion can damage the toy.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as
recommended in the “Battery Installation” instruc-
tions are to be used.
• If removable rechargeable batteries are used, they are
only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy
before they are charged.
• If you use a battery charger, it should be examined
regularly for damage to the cord, plug, enclosure and
other parts. Do not use a damaged battery charger
until it has been properly repaired
1.5V x 3
"C" (LR14)
SHOWN ACTUAL SIZE
• Tip the castle face down.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver.
• Lift to open the battery compartment door.
• Insert three, size “C” (LR14) alkaline batteries
as indicated inside the battery compartment.
• Replace the battery compartment door and
tighten the screw with a Phillips screwdriver.
Do not over-tighten.
Battery Compartment
Drawbridge
• Position the turret top so that the decorated side is
upright. At an angle, insert the turret top hooked tab
into the slot in the side of the drawbridge.
• Fit and snap the turret top slots to the large turret
tabs, as shown.
• Insert a screw through the turret top, large turret
and into the drawbridge assembly. Tighten the screw
with a Phillips screwdriver. Do not over-tighten.
One-time assembly is now complete.
Turret Top
Hooked
Tab
6
6
Large
Turret
A
As ss se em mb bl ly y
B
Ba at tt te er ry y I In ns stallation tallation
5
Bottom View
Bottom View
Turret Top

Label Decoration
Label Decoration
• Wash your hands before applying the labels.
• Make sure the areas where the labels will be applied are clean and
dry. Wipe this product with a clean, soft, dry cloth to remove any
dust or oils.
• For best results, do not attempt to apply a label more than once.
• Apply the labels as shown in the illustrations above.
4
18
11
3
57
6
8
19
P
Proper label application will help to keep the labels looking their best.
6
Front View
Back View
1
14
9
16
15
10
2
13 12
17

The all-seeing eyes of the castle’s lion face recognize the knights of the realm as
they approach the castle... and Magic Castle™responds with sound and light!
W
Wh ho oG Go oe es sT Th he er re? e?
Footpad
• Place a good knight on the footpad.
The lion’s green eyes light up and the
drawbridge opens.
• Place an enemy knight on
the footpad and the lion flashes fiery red eyes.
• Enemy knights can still open the drawbridge with a
direct cannonball hit to the lion’s face.
Hint: The drawbridge will not open each time there
is a direct hit. The drawbridge will open at random.
• Note the position of the spring inside the cannon.
• Load the cannon with a cannonball. Press the
cannonball in until the spring cocks.
• Press the trigger to fire the cannon.
Trigger
CAUTION
• Only use the projectiles (cannon
balls) supplied with the toy.
• Do not fire at people or animals.
Direct Hit!
7

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©1999 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
• To clean, wipe the surface of this toy with a damp
cloth. Do not immerse the this toy.
• If sound or light from/on this toy becomes faint, (or
there is no sound or light), or the drawbridge does
not open, remove the batteries and dispose of them
properly. Replace the batteries with three, size “C”
(LR14) alkaline batteries.
• This toy has no consumer serviceable parts. Please
do not take this toy apart.
Questions ? We’d like to hear from you!
Call Fisher-Price®Consumer Affairs, toll-free at
1-800-432-KIDS, 8 AM - 5 PM EST Monday
through Friday. Hearing-impaired consumers
using TTY/TDD equipment, please call
1-800-382-7470. Or, write to: Fisher-Price
Consumer Affairs, 636 Girard Avenue,
East Aurora, New York 14052.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful intereference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
Care
Care
FCC Statement
FCC Statement
(United States Only)
(United States Only)
Printed in Mexico 77198PR-0920
72946
Haunted
Castle
72899 Coach
72947
Sorcerers
72927 Cyclops
72926 Dragon
Magic Castle™Villain and
Figure Pack Assortment
..
... .and there's more! and there's more!