Fisher-Price CDN43 User manual

CDN43
fisher-price.com
Please keep this instruction sheet for future reference, as it contains important information.
This product includes four AA batteries in a disposable box.
Batteries included are for demonstration purposes only. Before first time use,
remove the AA batteries in the disposable box and dispose of them properly.
Requires four C (LR14) alkaline batteries (not included) for operation.
Battery installation is required. Only adults should install batteries.
Tool required: Phillips screwdriver (not included).
Wipe this toy with a clean, damp cloth. Do not immerse.
This toy has no consumer serviceable parts. Do not take apart.

Battery Replacement
Before first time use: The soother includes
four AA batteries in a disposable box for
demonstration purposes only. Remove the
disposable box with AA batteries and install
four C (LR14) alkaline batteries.
• Loosen the screws in the battery compartment
door and remove the door.
• Open the tabs on the disposable box and lift
to remove it.
• Throw away the disposable box and included
AA batteries.
• For longer life, use alkaline batteries.
• Insert four, new C (LR14) alkaline batteries.
• Replace the battery compartment door and
tighten the screws.
• If the soother begins to operate erratically,
you may need to reset the electronics. Slide
the power/volume switch off and back on.
Battery Safety Information
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1,5V x 4
C (LR14)
i
e
s
.
n
d
y
,
de
.
ay

Soothing Lights, Music & Motion
• Slide the power/volume switch on the back
of the soother to ON with low volume,
ON with high volume or OFF.
• Slide the mode switch to:
Projector, Music & Motion – for projector
lights show, music/sounds and swimming
sea action.
Music only – for music/sounds
Lights, Music & Motion – for swimming
sea action, music/sounds, and glowing
lights inside the soother.
• Press a music/sound selection button to hear
nature sounds, musical tunes or
white noise. Press a button again to change
the music/sound. Press and hold a music/
sound selection button to turn off the music/
sounds/lights.
Hint: The music only mode plays for
approximately 60 minutes. When in the lights,
music & motion or projector, music & motion
modes the music will play for approximately
30 minutes, and lights/motion will turn off
after approximately 15 minutes. Press
a button to restart.
Sooth
i
n
g
L
ig
hts, Mus
i
c & Mot
i
on
•
Slide the power/volume switch on the bac
k
•
Press a music/sound selection button tohear
Press the buttons
Press the buttons
for sounds/music
for sounds/music

Consumer Information
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.However, there is no
guarantee that interference will not occur
in a particular installation.If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
NOTE: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
©2014 Mattel. All Rights Reserved.
PRINTED IN CHINA CDN43_1100529008_DOM
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes : (1) il ne
doit pas produire de brouillage et (2) il doit
pouvoir tolérer tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de
compromettre son fonctionnement.