Fisher-Price DRL52 User manual

1
DRL52
LittlePeople.com
Adult assembly
required. Required tool:
Phillips screwdriver
(not included).
Keep these
instructions for future
reference as they
contain important
information.
Periodically wipe each
part of this toy with
a clean, damp cloth.
Do not immerse.
Wand requires two AAA
batteries (included).
Palace requires three AA
batteries (included).
Batteries included are
for demonstration
purposes only.
1,5V x 2
AAA (LR03)
1,5V x 3
AA (LR6)
Additional figures sold separately and subject to availability.

2
Consumer Information
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes : (1) il ne
doit pas produire de brouillage et (2) il doit
pouvoir tolérer tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de
compromettre son fonctionnement.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.However, there is no
guarantee that interference will not occur
in a particular installation.If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
NOTE: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
©Disney
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted.
DRL52-0970
PRINTED IN CHINA 1101328167-DOM
Protect the environment by not
disposing of this product or any
batteries with household waste.
This symbol indicates that this product
shall not be treated as household
waste. Check your local authority for
recycling advice and facilities.

3
Assembly
• Fit a connector to each side of the palace base.
• Insert two screws into each connector
and tighten.
• Fit the steps to the center of the palace base.
• Insert three screws and tighten.
1
2
This package contains small
parts. For adult assembly only.
CAUTION
M3,5 x 12 mm - 9
Shown Actual Size
Tighten and loosen all screws with
a Phillips screwdriver. Do not over-tighten.
INSIDE VIEW
FRONT VIEW

4
Battery
Replacement
Battery Safety
Information
• For longer life, use alkaline batteries.
• Locate the battery compartment door on
the back of the wand and the bottom of
the palace.
• Loosen the screw in each battery compartment
door with a Phillips screwdriver and remove
each door. Remove the exhausted batteries and
dispose properly.
• Insert two, new AAA (LR03) alkaline
batteries in the wand, and three, new AA
(LR6) alkaline batteries in the palace.
• Replace each battery compartment door and
tighten the screws. Do not over-tighten.
• If the palace or the wand begin to operate
erratically, you may need to reset the
electronics. Slide the power/volume switch
on the bottom of the palace, off and back on.
Remove the batteries from the wand
and reinstall them.
• When sounds or lights from the place, or
lights from the wand become faint or stop,
it’s time for an adult to change the batteries.
1,5V x 2
AAA (LR03)
1,5V x 3
AA (LR6)
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable.
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Wand
Palace

5 6
Timeless stories…Endless play!
Press the button on the wand... ... or point and wave the wand at
the glass slipper inside the palace
for music, phrases and lights!
Slide the power/volume
switch, on the bottom of
the palace, to ON with
low volume, ON with
high volume or OFF.
Spin the dance floor for lights
and sounds!
Place a figure on the bottom step
of the staircase and press. The
palace recognizes and responds
to the princess!
Sleep Mode
• After about three-four minutes of
inactivity, the palace enters sleep mode
and the glass slipper light turns off.
When this happens, the wand does not
activate music, lights or phrases.
• Here’s how to wake up the palace:
- Spin the dance floor.
- Press the bottom step of the staircase.
- Slide the power/volume switch on the
bottom of the palace off and then back
on again.
• If the glass slipper light still does
not turn on, it’s time to change
the batteries!
Glass Slipper
Glass Slipper