Fisher-Price Sparkling Symphony Starlights Bear User manual

FCC Statement
(United States Only)
Note: This equipment has been
tested and found to comply with
the limits for a Class B digital
device, pursuant to Part 15 of the
FCC Rules. These limits are
designed to provide reasonable
protection against harmful
interference in a residential
installation. This equipment
generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there
is no guarantee that interference
will not occur in a particular
installation. If this equipment does
cause harmful interference to
radio or television reception, which
can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of
the following measures:
• Reorient or relocate the
receiving antenna.
• Increase the separation
between the equipment
and receiver.
• Consult the dealer or an
experienced radio/TV
technician for help.
Questions? We’d like to hear from you!
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470. Or, write to: Fisher-Price®Consumer Relations,
636 Girard Avenue, East Aurora, New York 14052.
CANADA, Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
Questions? 1-800-567-7724. GREAT BRITAIN, Mattel U.K., Ltd., Helpline: 01628 500303.
AUSTRALIA, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
ConsumerAdvisory Service 1-800-800-812 (valid only in Australia).
Care
Light and
Sound Box
IMPORTANT! You must remove
the light and sound box before
washing. Do not expose the light
and sound box to water. Do not
immerse the light and sound box
in water.
• Open the fastener flap on the
back of the toy and remove the
light and sound box.
• Place the toy in a pillowcase
and machine wash cold on the
gentle cycle. Use a mild
detergent. Do not use bleach.
• Tumble dry on low heat. Do not
dry clean.
• Fit the light and sound box
back into the toy and close the
fastener flap.
• If sounds or lights from this toy
become faint or stop working,
it’s time for an adult to replace
the batteries!
Model Number 71697
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2000 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China 71697pr-0920
Starlights Bear™
Please save these instructions for future reference.
Requires three “AA” alkaline batteries.
Dispose of batteries safely.
Adult assembly is required for battery replacement.
Tool required for battery replacement:
Phillips screwdriver (not included).
Fastener
Flap
TM

Battery Replacement Soothing Music and Sparkling Lights
For best performance, we recommend replacing the batteries that came
with this toy with three new alkaline batteries.
Battery
Compartment
Door
“AA” (LR6)
1.5V x 3
Shown Actual Size
• Hug the bear’s tummy to
hear a soothing classical
selection or a traditional
children’s song.
• The bear’s nightcap lights
up with twinkling lights.
• To hear more music
selections, hug the bear
again and again.
• Do not mix old and new batteries.
• Do not mix different types of
batteries: alkaline, standard
(carbon-zinc) or rechargeable
(nickel-cadmium).
• Remove the batteries during long
periods of non-use. Always
remove exhausted batteries from
the toy. Battery leakage and
corrosion can damage this toy.
Dispose of batteries safely.
• Never short circuit the
battery terminals.
• Non-rechargeable batteries are
not to be recharged.
• Only batteries of the same or
equivalent type as recommended
in the “Battery Replacement”
instructions are to be used.
• If removable rechargeable
batteries are used, they are
only to be charged under adult
supervision.
• Rechargeable batteries are to be
removed from the toy before they
are charged.
• If you use a battery charger, it
should be examined regularly for
damage to the cord, plug,
enclosure and other parts. Do not
use a damaged battery charger
until it has been properly repaired.
• Open the fastener flap on the
back of the toy.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. (The screw will
remain in the door.)
• Lift to remove the battery
compartment door.
• Insert three “AA” (LR6) alkaline
batteries as indicated inside the
battery compartment.
Helpful Hint: We recommend
using alkaline batteries for longer
battery life.
• Replace the battery compartment
door and tighten the screw with
a Phillips screwdriver. Do not
over-tighten.
• Close the fastener flap.
Fastener
Flap
• Open the fastener flap
on the back of the toy.
• Locate the volume
switch on the battery
compartment.
• Slide the switch up for
Low volume or down
Volume Switch
Volume
Switch
Battery Tips
for High volume .
Adjusting
the Volume